15MY53A: Fluid Power Automation Mechanical MTT 5th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Fluid Power Automation detail syllabus for Mechanical Engineering (Machine Tool Technology) (73), C15 scheme is taken from DTE Karnataka official website and presented for diploma students. The course code (15MY53A), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below.

For all other mechanical mtt 5th sem syllabus for diploma c15 scheme dte karnataka you can visit Mechanical MTT 5th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. For all other ELECTIVE-I subjects do refer to ELECTIVE-I. The detail syllabus for fluid power automation is as follows.

Pre-requisites:

Knowledge of basic mathematics, Science and elements of machine tools

Course Objectives:

1. Understand the basic hydraulic and pneumatic system and their techniques.
2. To understand the concept and principle operation of automation systems and their controls.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT-I INTRODUCTION TO HYDRAULIC 9 Hrs

1. Introduction to Fluid power
2. Basic concept of Pascal’s law
3. Properties of fluids: Density, Specific gravity, Specific Weight, Specific Volume Dynamic Viscosity, Kinematic Viscosity, Surface tension, Capillarity, Vapour Pressure, Compressibility.
4. Application and advantages of fluid power.
5. Types of fluids
6. Define types of flows, continuity equation.
7. Define Fluid pressure, Pressure head, Pressure intensity, Concept of absolute vacuum, Gauge pressure, atmospheric, pressure, absolute pressure.
8. Define Simple and differential manometers.

UNIT-II BASIC COMPONENTS OF HYDRAULIC SYSTEMS 9 Hrs

1. Introduction to basic hydraulic system.
2. Introduction to pumps
1. External Gear Pumps
2. Internal Gear Pumps
3. Unbalanced vane pump
3. Introduction to Hydraulic Actuator
1. Rack and pinion Semi Rotary Actuator
2. Chain and sprocket semi rotor
3. Helical screw semi rotary
4. Hydraulic cylinder
1. Single and double acting cylinder
5. Hydraulic valves (Classifications only.

UNIT-III SEALS , FILTERS AND ACCUMULATORS 7 Hrs

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT-IV INTRODUCTION TO PNEUMATICS AND PNEUMATICS VALVES 9 Hrs

1. Introduction to pneumatic
1. Basic Pneumatic system
2. Filter, regulator and lubricator.
3. Direction control valves spool type
1. Two way
2. Three way
3. Four way
4. Pressure control valve
1. Pressure relief valve
5. Flow control valve
1. Needle valve
2. Gate valve
3. Time delay valve
6. Basic Pneumatic circuit
7. Semi-automatic material handling circuit

UNIT-V HYDRO PNEUMATIC 9 Hrs

1. Introduction
2. Air-oil Reservoir
3. Air-Oil Cylinder
4. Air-Oil intensifier
5. Comparison of hydraulic system, Pneumatic system, hydro-pneumatic system
6. Advantages and disadvantages of hydro-pneumatic system

UNIT-VI PNEUMATIC CONTROLS 9 Hrs

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Reference Books:

• Hydraulic and Pneumatic controls by R. Srinivasan
• Pneumatics Controls by Joji Wiley India Publications
• Hydraulic and pneumatic by Umesh patil
• Introduction to pneumatic by Sri.HariRao
• Introduction to fluid power by James L. Johnson
• Hydraulic and pneumatic by Sakriabaig

Model Question Paper:

(CIE)

1. List any ten properties of fluid.
2. Explain Fluid pressure, Pressure head of fluids. OR Make use of a sketch and explain simple manometer.
3. Make use of a sketch of External Gear Pumps and label the parts. OR Make use of a sketch of helical screw semi rotary actuator and label the parts.
4. List any five types of hydraulic actuators.

Note: Internal Choice may be given in each CO at the same cognitive level (CL).

Model Question Paper:

PART-A

(Answer any SIX Questions from this Section) (6 x 5) = 30

1. Explain following terms Density and Specific gravity.
2. List any five and advantages of fluid power.
3. Discuss any two types of flows.
4. Make use of a sketch of internal Gear Pumps and label the parts.
5. List any five types of hydraulic actuators.
6. List five materials used for seals.
7. Make use of a sketch of 3/2 spool type DC valve and label the parts
8. Explain air-oil intensifier
9. List the five type of switches used in control system

PART -B

(Answer any SEVEN Questions from this Section) (7×10)=70

1. Explain the terms Gauge pressure, atmospheric pressure, absolute pressure and continuity equation
2. Make use of a sketch and explain External Gear Pumps
3. Make use of a sketch and explain double acting cylinder
4. Make use of a sketch and explain Dead weight type accumulators
5. Make use of a sketch and explain Pressure relief valve
6. Make use of a sketch and explain Semi-automatic material handling circuit
7. Make use of a sketch and explain air-oil cylinder.
8. List any six advantages and four disadvantages of hydro-pneumatic system.
9. Make use of a sketch and explain Back Pressure sensors
10. Explain reciprocation of a cylinder using pressure switches

For detail syllabus of all other subjects of BE Mechanical Mtt, C15 regulation do visit Mechanical Machine Tool Tech 5 sem syllabus for C15 Regulation.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.