15MY42T: Metrology Measurement and Instrumentation Mechanical MTT 4th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Metrology Measurement and Instrumentation detail DTE Kar Diploma syllabus for Mechanical Engineering (Machine Tool Technology) (MY), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15MY42T), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other mechanical mtt 4th sem syllabus for diploma c15 scheme dte karnataka you can visit Mechanical MTT 4th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for metrology measurement and instrumentation is as follows.

Pre-requisites:

Knowledge of basic mathematics and Science. Basic Electrical and Electronics Engineering

Course Objectives:

1. Understand the basic metrology measurement and their techniques.
2. To understand the concept and principle operation of metrology instruments & their controls.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit -I Basic principles of measurement 10

1. Basic principles of measurement
2. Legal Metrology
3. Need of inspection
4. Measuring system
5. Precision and accuracy
6. Distinction between precision and accuracy
7. Factors affecting the accuracy of the measuring system
8. Sensitivity
9. Readability
10. Calibration
11. Magnification
12. Repeatability
13. Reproducibility
14. Errors in measurement
15. Types of errors-controllable and random
16. Types of standard-
1. Line-Yard & Meter
2. End
3. Wave length standard
17. Sub division of Standards -Primary, secondary, Tertiary & working Standard

Unit-II Introduction to comparators 8

1. Introduction to comparators
2. Need for a comparator
3. Use of comparator
4. Essential characteristics of a good comparator
5. Classification
1. Mechanical comparator
1. Dial indicator.
2. Mechanical optical comparator
3. Solex pneumatic gauge

Unit-III Angular, Screw and Gear measurement 8

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit- IV Transducers 9

1. Transducers
2. Introduction
3. Criterion for selection of transducer
4. Mechanical Transducer
1. Elastic Transducer
2. Hydro pneumatic Transducer
5. Electrical Transducer
1. Sliding contact resistive Transducer
2. Piezo-Electrical Transducer
6. Electronic Transducer

Unit-V Measurement frequency, load, flow and torque 9

1. Measurement frequency, load, flow and torque
2. Introduction
3. Simple Electronic counter
4. Frequency meter
5. Hydraulic and pneumatic load cell
6. Turbine flow meter
7. Magnetic flow meter
8. Prony Brake Dynamometer

Unit-VI Measurement of temperature, pressure 8

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Reference Books:

1. Engineering Metrology- R. K. JAIN, Khanna Publishers
2. Mechanical Measurements-R K Jain,
3. Engineering Metrology- I C Gupta, Dhanpat Rai Publications
4. Engineering Metrology-Anand Bewoor,Tata McGraw Hill
5. A Text Book of Metrology – By M. MAHAJAN. DHANPAT RAI Company

SUGGESTED LIST OF STUDENT ACTIVITYS

Note: the following activities or similar activities for assessing CIE (IA) for 5 marks (Any one)

1. Each student should do any one of the following type activity or any other similar activity related to the course and before conduction, get it approved from concerned Teacher and HOD.
2. Each student should conduct different activity and no repeating should occur

1. Prepare a chart to show the standard (meter & yard) or Assignments
2. Prepare a chart to show the different types of comparator & transducer or assignment
3. Prepare a chart to show the working principle of angle dekkor or Assignments

Course Delivery:

• The course will be delivered through lectures and Power point presentations/ Video

Model Question Paper:

(CIE)

1. Explain Measuring system
2. Define Sensitivity & Readability
3. Define comparators OR List the classification of a comparator.
4. Explain with a neat sketch Solex pneumatic gauge OR Sketch and explain Dial indicator

Model Question Paper:

PART-A

(Answer any SIX Questions from this Section) (6 x 5) = 30

1. List the classification of a comparator.
2. Explain need of a comparator
3. List the various limitations of sine bar.
4. Explain principles of autocollimator
5. Explain briefly instruments used for angular measurements
6. Define Transducers
7. Explain working principle of electronic counter
8. Explain Thermocouple
9. Explain briefly elements of control system

PART -B

(Answer any SEVEN Questions from this Section)

1. Define
1. Repeatability
2. Sensitivity
3. Readability
4. Magnification
2. Explain static and dynamic errors
3. With a neat sketch explain Line standard meter.
4. Explain essential characteristics of a good comparator
5. Sketch and explain Angle dekkor
6. Sketch and explain Hydro pneumatic Transducer
7. Sketch and explain Electronic Transducer
8. Sketch and explain Turbine flow meter
9. Sketch and explain Hydraulic and pneumatic load cell
10. Sketch and Explain Bimetallic Thermometer

For detail syllabus of all other subjects of BE Mechanical Mtt, C15 scheme do visit Mechanical Mtt 4th Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.