15MI62D: Instrument Drawing Mech Instrumentation 6th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Instrument Drawing detail DTE Kar Diploma syllabus for Mechanical Engineering (Instrumentation) (MI), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15MI62D), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other mech instrumentation 6th sem syllabus for diploma c15 scheme dte karnataka you can visit Mech Instrumentation 6th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for instrument drawing is as follows.

Pre-requisites:

Engineering graphics-I, Computer Aided Engineering Drawing and sound knowledge of measuring instruments.

Course Objectives:

1. Understanding of drawing, which includes clear visualization of objects and the proficiency in reading and interpreting a wide variety of production and assembly drawings.
2. This course envisages reinforcing and enhancing the knowledge and skill acquired in the Engineering graphics-I and Computer Aided Engineering Drawing.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT I: CONVENTIONAL REPRESENTATION 09Hrs

Standard convention using SP-46 (1988), Materials like Cast Iron, Mild Steel, Brass, Bronze, Aluminum, wood, Glass, Concrete and Rubber. Long and short break in pipe, rod and shaft. Various sections- Half, removed,-Standard convention of Knurling, Splined shafts, and chain wheels-Springs with square and flat ends, Gears, sprocket wheel-Counter sunk & Counter bore.

UNIT II: DIALS 09Hrs

Pressure gauge dial, Dial indicators, Tachometer, Ammeter, Voltmeter and Speedometer

UNIT III: SECTION OF INSTRUMENTS 12Hrs

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT IV: PRODUCTION DRAWINGS 06Hrs

Surface roughness, Indication of machining, Symbol showing direction of lay, Roughness grades, Machining allowances, Machining symbols used in industry.

UNIT V: ASSEMBLY DRAWING OF INSTRUMENTS 36Hrs

Introduction to the assembly drawing, Steps involved in preparing assembly drawing, Details sequence in assembly, Preparation of details and Assembly of parts with sectional views of Water meter, Dial indicator, Pressure gauge, Wall clock, Parallel rule and Movement holder. (Front, Top and Side views).

UNIT VI: TRACING AND BLUE PRINTING 06Hrs

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Reference Books:

1. Machine Drawing- N.D.Bhatt, Charotar Publication, Anand
2. Machine Drawing-Sidheshwar-Tata McGraw Hill
3. Code of practice for general engineering-IS Code SP 46(1988)- Engineering Drawing Practice for School and colleges
4. Production Drawing-L.K.Narayanan,P.Kannaich,- New Age International Publication
5. Computer Aided Engineering Graphics -R.K.Hegde & Niranjan Murthy.
6. Fundamental of Engineering -K.R. Gopala Krishna Subhas Publishers.

Suggested List of Student Activities:

1. Each student should submit any one of the following type activity or any other similar activity related to the course and before take up get it approved from concerned Teacher and HOD.
2. Each student should conduct different activity and no repeating should occur

1. Select at least four simple measuring instruments. Get them approved by teacher. Measure and sketch them in a drawing sheet with dimensions.
2. Select at least one simple measuring device, disassemble it in group of 5-6 students, Get them approved by teacher. Measure and sketch them in a drawing sheet with dimensions. Example- assembly of Water meter, Dial indicator etc.
3. Bring Actual assembly of measuring instrument from workshop/industry, measure dimensions, sketch it and make 2D production drawing for the same.

Course Delivery:

The course will be delivered through lectures and Demonstration and practices

Note:.

1. Students should use separate A2 size drawing sheets for practicing the graded exercises.
2. Students should solve the assignment/activities.
3. The sessional marks will be awarded on the basis of Graded exercises and assignment.

Model Question Paper:

Part A

1. Draw the conventional representation of the following materials
1. Wood
2. Mild steel
3. Rubber
4. Glass
5. Concrete
2. Draw the dial showing its units and divisions of following instruments
1. Pressure gauge
2. Tachometer
3. Dial indicator

Part B

1. Draw the conventional representation of the following sections
1. Full section
2. Top-half in section
3. Bottom-half in section
2. Draw the conventional representation of the following terminology
1. Surface roughness
2. Roughness grades
3. Machining symbols

Part C

1. The detail parts of a Dial Indicator is given, Assemble the parts and show the following views to 1:1 scale. Show the important dimensions on the assembly drawing.
1. Front view in full section
2. Top view
3. Right side view

Follow the diagram from pdf.

For detail syllabus of all other subjects of BE Mech Instrumentation, C15 scheme do visit Mech Instrumentation 6th Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.