15MI53B: Horology Mech Instrumentation 5th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Horology detail syllabus for Mechanical Engineering (Instrumentation) (74), C15 scheme is taken from DTE Karnataka official website and presented for diploma students. The course code (15MI53B), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below.

For all other mech instrumentation 5th sem syllabus for diploma c15 scheme dte karnataka you can visit Mech Instrumentation 5th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. For all other Elective – I subjects do refer to Elective – I. The detail syllabus for horology is as follows.

Pre-requisites:

Knowledge of Applied Science and Industrial Instrumentation.

Course Objectives:

Understand the advances in technology, time measurement methods, types of time measuring devices, innovations in time measuring instruments and types of solvent for cleaning.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT I: THEORY OF TIME MEASUREMENT 08 Hrs

Introduction to time measurement, Earth rotation, Sidereal day, Solar & mean solar days, Unit of time, Latitudes and National standard times calendar

UNIT II: TIME MEASUREMENT IN OLDEN DAYS 06 Hrs

Electric candle, Burning lenity card, Water bowl, Sun dial, Hour glass.

UNIT III: GENERAL WORKING PRINCIPLE AND MECHANICS OF SIMPLE STRIKING SYSTEMS OF CLOCKS 10 Hrs

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT IV: GENERAL WORKING PRINCIPLE OF TIME PIECE 08 Hrs

Alarm/repeater Mechanism, Train of wheels, Trail train, Regulation, Function of complete balance wheels and Pivots bearings.

UNIT V: MECHANISM OF WATCHES 12 Hrs

Plates, bridges, Motive power to transmission, Escapement balance & hair spring, Regulation, winding, Hand setting mechanisms, train of wheels casing, Trail train, Wheels 2 jewel bearing. Resolve power, Pulse system, A.C.drives, Transistor clock, Electronic drive, Train of wheels, Gear train. Self winding principle, Self winding gear train, Drive of Calendar mechanisms, Jumpers & types of correction systems.

UNIT VI: SOLUTIONS & METHODS USED IN CLEANING AND LUBRICANTS 08 Hrs

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Reference Books:

1. HOROLOGY BY – HASWELL J.ERIC
2. LEATCH ESCAPEMENT BY – DR. JAMES C PELLINTON
3. MODERN CALENDAR WATCHES BY – B. HUMBEOT
4. CLOCK 2 WATCHES ESCAPEMENT BY – GAZELEY
5. DEERFLIES WATCH 2 CLOCK ENCYCLOPEDIAS BY – WAG PRES LTD

LIST OF SOFTWARES/ LEARNING WEBSITES:

1. http://www.technoloavstudent.com/elec 1/ldr1.htm
2. http://www.aptechnologies.co.uk/support/photodiodes/photodiode-theory-of-operation
3. http://sine.ni.com/np/app/main/p/ap/daq/lang/en/pg/1/sn/n17:daq,n21:11/fmid/2998/
4. https://www.amplicon.com/info/faq -answer.cfm?id=5 84
5. https: //www .voutube.com/watch?v=nW421UQa7as

Course Delivery:

• The course will be delivered through lectures and Power point presentations/ Video
• Teachers can prepare or download ppt of different topic’s measuring instruments usage in mechanical engineering application, can prepare alternative slides.

Suggested List of Student Activities:

Note: the following activities or similar activities for assessing CIE (IA) for 5 marks (Any one)

1. Each student should submit any one of the following type activity or any other similar activity related to the course and before take up get it approved from concerned Teacher and HOD.
2. Each student should conduct different activity and no repeating should occur

1. Each student will select and bring at least one clock. Sketch and label main parts of clock. Run the clock and note down the time in hours, minutes and seconds.
2. Sketch and label the part of watch, assemble the different parts of watch, list the steps followed for assembling and record the timings.
3. List the different solvents and lubricants used in industries.

Model Question Paper:

PART-A

1. Explain solar and mean solar days
2. Explain briefly burning lenity card
3. Explain with neat sketch Simple pendulum
4. Explain indicating system
5. List the function of complete balancing of wheels
6. Define Plates and bridges
7. Explain transistor clock
8. Discuss Self winding gear train
9. Choose different cleaning solutions used in horology

PART-B

1. Explain about Earth rotation 05
2. Write a short note on sidereal day 05
1. Illustrate with neat sketch water bowl 05
2. Summarize Electric candle 05
1. Summarise on motive power 05
2. Illustrate about A.C. Drives 05
4. Discuss the working of Rack 2 locking plates 10
1. Explain Alarm or repeater mechanism 05
2. Illustrate with neat sketch Pivots bearings 05
1. Summarise motive power of transmission 05
2. Choose the method of balancing of hair spring 05
1. Tell about train of wheels 05
2. Discuss gear train of watches 05
1. Explain drive of Calendar mechanisms 05
2. Explain with neat sketch jumpers 05
9. Explain methods of cleaning 10
1. Explain Epilame treatment 05
2. Explain methods of lubrication 05

For detail syllabus of all other subjects of BE Mech Instrumentation, C15 regulation do visit Mech Instrumentation 5 syllabus for C15 Regulation.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.