15MI51T: Industrial Instrumentation-2 Mech Instrumentation 5th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Industrial Instrumentation-2 detail DTE Kar Diploma syllabus for Mechanical Engineering (Instrumentation) (MI), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15MI51T), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other mech instrumentation 5th sem syllabus for diploma c15 scheme dte karnataka you can visit Mech Instrumentation 5th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for industrial instrumentation-2 is as follows.

Pre-requisites:

Knowledge of Industrial Instrumentation-I

Course Objectives:

Understand the advance technology, measurement techniques, types of instrumentation devices and innovations in measuring instruments.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT I: FORCE MEASUREMENT 08 Hrs

Introduction to Force Measurement, Basic methods of Force Measurement, Scales & Balances, Equal arm balance, Un-equal arm balance, Multiple lever systems, Pendulum scale, Accelerometers, Hydraulic & Pneumatic load cells, Elastic sensing elements, Proving rings.

UNIT II: TORQUE MEASUREMENT 07 Hrs

Introduction to Torque Measurement, Torque reaction methods, Strain gauge torsion method, Stroboscopic method, Optical torsion meter, Electrical torsion meter.

UNIT III: DYNAMOMETERS 09 Hrs

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT IV: TRANSDUCERS & STRAIN GAUGES 12 Hrs

Introduction to Transducers, Classification, Transducers sensitivity, Variable resistance transducers, Variable inductance transducers, LVDT, Capacitive transducers, Piezo-electric transducers, Wheat-stone bridge circuit, Potentiometers. Introduction to Strain gauges, Types of Strain Gauges, Strain measuring technique, Requirements of Strain Gauges, Gauge factor, Alloys & materials, Surface preparation & bonding techniques.

UNIT V: ANGULAR VELOCITY & ACCELERATION MEASUREMENT 10 Hrs

Introduction to Angular Velocity measurement, Mechanical tachometer, Electrical
tachometer, Contactless electrical tachometers – Inductive pick-up tachometer, Capacitive pick-up tachometer, Photo-electric tachometer. Introduction to Acceleration measurement, Piezo-electric Accelerometer, Seismic accelerometer, Strain Gauge Accelerometer, LVDT Accelerometer, Potentiometric accelerometer.

UNIT VI: INDICATING & RECORDING MEANS 06 Hrs

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Reference Books:

1. Mechanical Measurements And Instrumentation A. K. Sawhney and Puneeth Sawhney DhanpatRai & Sons, New Delhi.
2. Mechanical Measurement and Control Dr.D.S.Kumar Metropolitan Book Company Pvt. Ltd., New Delhi
3. Mechanical Engineering Measurement Thomas Beckwith, N.Lewis Buck, Roy Marangoni Narosa Publishing House, Bombay
4. Mechanical and industrial measurement R.K.Jain Khanna publishers
5. Principle of Industrial instrumentation D.Patranabis Tata Mc Graw hill education.

List of Softwares / Learning Websites:

1. http://www.npl.co.uk/upload/pdf/forcesuide.pdf
2. http://www.appmeas.co.uk/torque-transducers-and-torque-sensors.html
3. http://instrumentationandcontrollers.blogspot.in/2011/05/optical-torsion-meter.html
4. http://instrumentationandcontrollers.blogspot.in/2012/08/electrical-torsion-meter-torque.html
5. http://www.qec.edu.sa/eng/students/lectures/322 attachments/85/ME%20343/Lecture%2015-%20Force%20measurement.pdf
6. http://www.jor.se/measurement/Kyowa/Kyowa-PDF/whats.pdf
7. http://www.engr.usask.ca/classes/EE/323/notes 2005/chapter7.pdf
8. http://www.mfpt.org/PDFs/MFPT%2059%20%20ACCELERATION%20MEASUREMENTS%20SESSION%204-19-05 comp.pdf
9. http://people.wku.edu/david.neal/117/Unit2/AngVel.pdf
10. http://www.me.ua.edu/me360/PDF/Readout.pdf

Course Delivery:

• The course will be delivered through lectures and Power point presentations / Video
• Teachers can prepare or download ppt. of different topic’s measuring instruments usage in mechanical engineering application, can prepare alternative slides.

Suggested List of Student Activities:

Note: The following activities or similar activities for assessing CIE (IA) for 5 marks (Any one)

1. Each student should submit any one of the following type activity or any other similar activity related to the course and before take up get it approved from concerned Teacher and HOD.
2. Each student should conduct different activity and no repeating should occur.

1. Each student will select and bring at least one mechanical component. Sketch each component. Outline its applications and submit an handwritten report.
2. Conduct study on real time applications of a Transducer / Strain gauge and submit a hand report on the study.
3. Take case study on applications of any one Recording system in nearby industry; submit report on same.
4. Sketch any one Tachometer, list the steps followed and record the observations for measuring the Torque and submit an handwritten report.
5. Select appropriate Transducer / Strain gauge and interpret its concept and List / note the advantages, limitations & applications and submit an handwritten report.

Model Question Paper:

(CIE)

1. Define Force. Mention the basic methods of measurement of Force. OR Define the terms Scales and Balances. List the force measuring system balances.
2. Explain with a neat sketch discuss the construction and working of an Equal Arm Balance. OR Explain with a neat sketch construction and working of unequal Arm balance.
3. What is Torque? Briefly explain the concept of Torque Measurement. OR Explain the method of measuring torque of rotating parts using Torque Reaction Concepts / methods.
4. Explain with a neat sketch the functioning and construction of Optical Torsion Meter. OR Explain with a neat sketch Electrical Torsion Meter and describe its construction and working.

Model Question Paper:

PART-A [6 x 5 = 30 marks]

1. Define Force. Mention the basic methods of measurement of Force.
2. What is Torque? Briefly explain the concept of Torque Measurement.
3. Explain briefly the different methods of measurement of instantaneous power using tachometers and load cells with strain gauge bridges.
4. What are Dynamometers? How are the Dynamometers classified?
5. Define the terms
1. Transducer Sensitivity and
2. Gauge Factor
6. Explain the importance of Transducers in instrumentation process. Cite suitable examples.
7. Define Tachometer. Classify Tachometers.
8. Explain briefly the concept of acceleration measurement.
9. What is the function of the display or recording element of a generalised measurement system.

PART-B [7 x 10 = 70 marks]

1. Explain briefly the concept of Force / Force measurement & mention its units. 05
2. Explain how elastic sensing elements can be used for measurement of force. Cite suitable examples. 05
2. Explain with a neat sketch construction and working of unequal Arm balance. 10
3. Explain with a neat sketch construction and working of Electrical Torsion Meter 10
4. Explain with a neat sketch construction and working Prony Brake Dynamometer 10
5. Construct DC Dynamometer and describe its construction and working. Write its advantages and limitations. 10
6. Explain with a neat sketch the construction and functioning of LVDT. 10
7. Explain with a neat sketch Wheat-stone bridge circuit. 10
8. Explain with a neat sketch the Mechanical Tachometer. 10
9. Explain with a neat sketch the principle of working of Strain Gauge Accelerometer 10
1. Discuss on Multipoint, multi-pointer and multi-range indicators. 05
2. Explain UV recorder and indicate all the component parts. 05

For detail syllabus of all other subjects of BE Mech Instrumentation, C15 scheme do visit Mech Instrumentation 5th Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.