15ME05P: Basic Workshop Practice Mining 2nd Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Basic Workshop Practice detail DTE Kar Diploma syllabus for Mining Engineering (MN), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15ME05P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other mining 2nd sem syllabus for diploma c15 scheme dte karnataka you can visit Mining 2nd Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for basic workshop practice is as follows.

Pre-requisites:

NIL

Course Objectives:

1. Students able to understand different tool &equipment for work shop practice.
2. Students acquire skills for the preparation of different Carpentry/fitting/welding models.
3. Students able to understand the safety precaution in the workshop
4. Student acquires skills of Application orientated tasks.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT:I CARPENTRY PRACTICE CONTACT HOURS:22 Hours

Study of the joints in roofs, doors, windows and furniture available in Polytechnic

Hands-on-exercise:

1. Demonstration of different wood working machines/ Power Tools of different wood working process, like planning, marking, Chiseling, Grooving, turning of wood etc.
2. Exercise on One simple Wood work joints like Mortise and tennon, dovetail joint by sawing, planning and cutting.

UNIT:II FITTING SHOP CONTACT HOURS:28 Hours

Hands-on-exercise

1. Demonstration of different fitting tools and drilling machines and power tool
2. Demonstration of different operations like chipping, filing, drilling, tapping, cutting etc.
3. Exercise on One simple fitting job involving practice of chipping, filing, drilling, tapping, cutting etc.

UNIT:III WELDING PRACTICE CONTACT HOURS:28 Hours

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Reference Books:

1. Ramesh Babu.V., “Engineering Practices Laboratory Manual”, VRB Publishers Private Limited, Chennai, Revised Edition, 2013 – 2014.
2. Jeyachandran.K.,Natarajan.S. andBalasubramanian.S., “A Primer on Engineering PracticesLaboratory”, Anuradha Publications, 2007.
3. Bawa.H.S., “Workshop Practice”, Tata McGraw Hill Publishing Company Limited, 2007.
4. RajendraPrasad.A. andSarma.P.M.M.S., “Workshop Practice”, SreeSai Publication, 2002.
5. Kannaiah.P. andNarayana.K.L., “Manual on Workshop Practice”, Scitech Publications, 1999.

Suggested List of Student Activities:

Note: the following activities or similar activities for assessing CIE (IA) for 10 marks (Any one)

1. Each student should do any one of the following type activity or any other similar activity related to the course and before conduction, get it approved from concerned Instructor and Foreman with an intimation to HOD
2. Each student should conduct different activity and no repeatoin should occur

1. Take the students for local body Carpentry works observe the carpentry practices followed in preparation of furniture/wood joints and Submit hand written report of 500 words
2. Take the students for local body Fitting works observe the fitting practices followed in preparation of fitting joints and Submit hand written report of 500 words
3. Take the students for local body welding works observe the welding practices followed in preparation of welding joints and Submit hand written report of 500 words

Course Delivery:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

SCHEME OF VALUATION

Note: Questions for the Semester End Exam will consist of

1. One Welding Model. – 15 marks
2. Any One Model from Fitting OR Carpentry- 30 marks

1. Listing of tools and operations. 05 05 10
2. Planning and marking 05 — 05
3. Performing of basic operations. 10 10 20
4. Dimensional accuracy 10 10
5. Oral 05

Tools-Fitter Section

1. Flat file 14″ rough bastard file 20
2. Try square 6″ 20
3. Triangular file 10″ rough 20
4. Half round file 10″ rough 20
5. Hack saw frame solid 12″ 20
6. Center punch 20
7. Ball peen hammer 11/2 Lbs 20
8. Flat chisel 6″ 20
9. Smooth file 10″ flat 20
10. Bench vice 8″ 20
11. Leg vice 6″ 10
12. Power hack saw 01
13. Bench grinding 01
14. Bench drilling machine up to 12mm cap 01
15. Drill bit up to 12mm straight shunk 04
16. Tap set and die set up to 1″ 01
17. Vernier caliper 10
18. Spring divider 20
19. Steel scale 20
20. Vernier height gauge 01
21. Surface plate 2×3 feet 02
22. Number punch 01
23. Anvil 20
24. V block 02

Carpentry Tools required for –

1. Carpenter bench vice 20
2. G or C clamp 6″ 20
3. Marking gauge 20
4. Try square 19mmx4″ 20
5. Wooden mallet 20
6. Firmer chisel 2″ 20
7. Firmer chisel 3/4″ 20
8. Mortise chisel 1/2″ 20
9. Metal jack plane 9″ 20
10. Beveled square 6″ 20
11. Hand saw or cross cut saw 20
12. Steel scale 12″ 20

Tools- welding

1. Arc welding transformer up to 300Amps 03
2. Welding shield 20
3. Ball peen Hammer 11/2 Lbs 10
4. Chipping Hammer 10
5. Wire brush 10
6. Anvil 01
7. Hand Gloves 05
8. Flat tongs 10
9. Steel scale 10
10. Flat file 14″ rough bastard file 10
11. Oxygen cylinder 01
12. Acetylene cylinder 01
13. Gas welding torch 05
14. Spark lighter 05
15. Gas welding goggles 10
16. Gas cutting torch 02
17. Try square 6″ 10

MODEL QUESTIONS FOR PRACTICE AND SEE

Follow from pdf.

MODEL QUESTIONS FOR VIVA VOCE

CARPENTRY SHOP

1. Differentiate between soft wood and hard wood.
2. Give the list of the common names of timber suitable for carpentry work.
3. Describe the term plywood. How it is obtained as large size sheets.
4. What are the marking tools used in wood working.
5. What is meant by marking gauge? How it is used for marking.
6. Give a list of the saws used for cutting wood.
7. What is cross cut saw and tenon saw.
8. What are the types of chisels used for wood working?
9. What is meant by mallet? What is the use of mallet?
10. Give the list of the plaining tools used in carpentry shops.
11. Describe briefly the construction of use of a wooden jack plane.
12. Name the types of work holding devices used for carpentry work.
13. Explain the use of bench vice.
14. Describe the working principle of band saw and circular saw.
15. What are the common defects in timber?
16. Mention the important carpentry tools.
17. What are the marking and measuring tools used in carpentry?
18. Mention the different types of saws and explain.
19. What is spokeshave?
20. What is boringtools?And its uses.
21. What are the striking tools and its uses?
22. What are the holding tools and its uses?
23. What is uses of the Rasps and Pincer
24. What are the carpentry processes used in wooden construction.
25. Mention the types carpentry joints

FITTING SHOP

1. Give a list of types of tools used in fitting operations.
2. Explain the types of work holding devices used in fitting.
3. Describe briefly the types of files used in fitting.
4. Explain the construction of a hack saw.
5. What are the types of cold chisels and for what purposes they are used.
6. Describe briefly the types of hammers used.
7. Define the term twist drill; distinguish a drill from a reamer.
8. What is a surface plate? For what purpose it is used.
9. What are the types of tools used for marking?
10. Explain the use of steel rule and a vernier caliper.
11. Explain the use of the different types of inside and outside calipers.
12. What is the use of combination set?
13. Describe how a micrometer is used for measuring a size.
14. Mention the commonly used in bench and fitting work.
15. Name the parts of a hand hammer.
16. What are the classifications of hammers?
17. What is the use of the flat, cross-cut, half round, diamond point, side chisels.
18. What is chipping?
19. Name the different parts of a file.
20. What is single cut and double cut of a file.
21. Mention the most commonly used shapes in files.
22. What is filing and mention the method of filing.
23. What is cross filing, straight filing and draw filing
24. What is a scraper and mention types of scraper.
25. What is the use of hacksaw and mention its types.
26. Mention the tools used for making.
27. What are the uses of Surface plate, Scriber, Punch, V-block, Angle plate, andtrysquare?

WELDING SHOP

1. What is welding
2. How u classify welding.
3. What is arc welding
4. What is an arc
5. Whatis the equipment used for arc welding.
6. How you set the voltage in arc welding
7. What is normal temperature for arc welding?
8. What are latest techniques used in arc welding.
9. What is an edge preparation?
10. Which type of electrode used in arc welding?
11. What is gas welding?
12. Name the different gases used in gas welding.
13. What are the applications of gas welding?
14. Whatis the equipment used in gas welding.
15. What is a flame?
16. Name the different types of flames.
17. What are the differences between Arc & Gas welding?
18. Which type of welding is used for sheet metals?
19. What are the defects in welding?
20. What are the precautions to be taken for welding?
21. Name the different safety devices used in welding
22. Name the different joints in welding.
23. What is a torch? Which welding used the torch?
24. What is Nozzle?
25. What is filler material in welding?
26. What are differences between welding & soldering?

For detail syllabus of all other subjects of BE Mining, C15 scheme do visit Mining 2nd Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.