15MC55P: Plc Lab Mechatronics 5th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Plc Lab detail DTE Kar Diploma syllabus for Mechatronics Engineering (MC), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15MC55P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other mechatronics 5th sem syllabus for diploma c15 scheme dte karnataka you can visit Mechatronics 5th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for plc lab is as follows.

Pre-requisites:

Knowledge of BEEE, PLC Programming, Digital Electronics, Fluid Pneumatics.

Course Objectives:

understand ladder programming, interface and develop PLC program for broadly defined engineering applications.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Contents

1. Develop a PLC ladder diagram to construct an alarm system which operates as follows
1. If one input is ON nothing happens
2. If any two inputs are ON, a red light goes ON
3. If any three inputs are ON, an alarm sirens sound
4. If all are ON, the fire department is notified.
2. Develop a PLC program using ladder diagram for start-stop jog.
3. Develop a PLC program using ladder diagram for Forward-reverse-stop with mutual interlocks
4. Develop PLC ladder diagram to realize the following logic gates.

AND, OR, NOT, NAND, NOR, EX-OR.

5. Develop the following Boolean expressions in to ladder diagram and realize
1. [(P+ 2 +R).(U+V). W .X]+(S+T).Y=Z
2. B.(C.(D+e + C)+F c ) = a
6. In certain process control application a fan is to run only when all of the following conditions are met
1. Input A is OFF
2. Input B is ON or i/p C is ON, or both B &C are ON
3. Inputs D &E both are ON
4. One or more of inputs F, G, or H is ON

Develop Gate logic, equivalent Boolean expression & realize the same using PLC ladder diagram

7. Develop a PLC ladder diagram to realize the following Timer operation. Write timing diagrams.
1. One shot operation
2. Limited ON time
8. There are 3 mixing devices on a processing line A,B ,C. After the process begin mixer-A is to start after 7 seconds elapse, next mixer-B is to start 3.6 second after A. Mixer-C is to start 5 seconds after B. All then remain ON until a master enable switch is turned off. Develop PLC ladder diagram, timing diagram and realize the same.
9. An indicating light is to go ON when a count reaches 23.The light is then go off when a count of 31 is reached. Develop, construct, and test PLC circuits for this process.
10. In certain process control application when the count reaches 25, a paint spray is to run for 40 seconds. Develop, construct, and test PLC circuits for this process.
11. Develop a Ladder diagram for the forward and reverse moment of a piston in pneumatic cylinder. The Ladder diagram should consist of 2 input Push button switches I1 and I2 .The output O1 and O2 of PLC are connected to Forward and retract Coil of the Pneumatic Cylinder.
12. In bottling plant of cool drinks the bottles are kept on the conveyor. Some bottles are capless, so these bottles are to be removed from the conveyor. I1 are I2 are two toggle switches connected to input unit of PLC. I1 is used to operate (ON) the conveyor and I2 is used to stop (OFF) the conveyor at any time. O1 is the output used to operate the conveyor. S2 is the Proximity Switch which predicts that metal cap is not present on the bottle top. Use I3 switch to operate the conveyor after the removal of capless bottle from the conveyor. Develop the Ladder diagram to achieve the above Industrial Scenario.
13. There are 4 cars parking spaces .Car is to detected and allowed to enter into the parking space if space is available. I1 is the proximity switch at the gate for detecting the presence of Car. I2,
14. I4, I5 are proximity switches which are installed at suitable places in 4 parking spaces. When the car is parked in a parking place , presence of Car is indicated by corresponding output O2,O3,O4,O5 (by glowing the Output) .If space is vacant the corresponding light will not glow and the car owner will have to go in that parking place. Develop the Ladder diagram to achieve the above Scenario.
15. Develop and Interface a PLC program for the following real time applications
1. Traffic light controlling
2. Water level controlling

Reference Books:

1. “Programmable Logic Controllers Principles & Applications” by John W. Webb -Ronald A. Reis. , 5th Edition, Published by PHI Publication.
2. Exploring Programmable Logic-Controllers with Applications by Pradeep Kumar Srivastava, BPB PUBLICATIONS.

Contents linked with CO and PO

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Scheme of valuation for SEE

1. Writing two Ladder diagrams. 10
2. Entering two programs in computer system 10
3. Simulation\Execution 10
4. Result 10
5. Viva – Voce 10

Student Activity

1. Prepare the hand written report on various sensors, actuators, transducers used in industrial automation.
2. Students can make models of Programmable Logic Controller applications beyond the curriculum.

Note:

1. Group of max four students should do any one of the above activity or any other similar activity related to the course COs and get it approved from concerned Teacher and HOD.
2. No group should have activity repeated or similar
3. Teacher should ensure activities by different groups must cover all Cos.
4. Teacher should asses every student as approved by HOD

For detail syllabus of all other subjects of BE Mechatronics, C15 scheme do visit Mechatronics 5th Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.