15HP32P: Computer Aided Engineering Drawing Mechanical HPT 3rd Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Computer Aided Engineering Drawing detail DTE Kar Diploma syllabus for Mechanical Engineering (Heat Power Technology) (HP), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15HP32P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other mechanical hpt 3rd sem syllabus for diploma c15 scheme dte karnataka you can visit Mechanical HPT 3rd Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for computer aided engineering drawing is as follows.

Pre-requisites:

Engineering Drawing.

Course Objectives:

1. Using computers and CAD software it is easy to create and modify drawings ultimately it saves time. It also may be useful to generate 2D and 3D manufacturing drawings.
2. In mechanical industry operating skills are required for computer aided drafting operations of machine components, handling of printers & plotters. This subject is also useful to apply concepts in modeling.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

COURSE CONTENT ANALYSIS

1. CAD Commands Familiarization 10
2. Practice On Commands 10
3. Development of Surfaces 18
4. Fasteners & Rivets 20
5. Creation of 3D Isometric Models 20

UNIT-I

CAD Commands Familiarization

Introduction to MCAD(parametric modelling) software-Understanding CAS technique, knowing the software interface, co-ordinate systems supported- Planes and their creation, reference axis, Sketch, Profile, basic commands related to 2D drawing.

UNIT-II

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT-III

Development of Surfaces

Importance of development of surfaces in sheet metal works, Developments of surfaces of following solids – cube ,prism,pyramid,cylinder,cones, Development drawings of Tray, funnel, Elbow

UNIT-IV

Fasteners and Rivets

Fasteners – square and hexagonal Bolt & Nut, Sketch the rivet and riveting joints- single riveted lap joint, double riveted butt joint single cover double cover plate- chain and zig – zag arrangement.

UNIT-V

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Text Books:

1. Machaical Engineering Drawing by SANKAR PRASAD DEY, Vikas Publishing house, 2015.
2. Machine Drawing by K.R Gopala Krishna.
3. Sham Tickoo- Autocad: A Problem-Solving Approach Thomson Learning EMEA, Limited.
4. George Omura- Mastering Auto CAD BPB Publication.
5. T Jeyapoovan- Engineering Graphics Using AutoCAD Vikas Publishing House Pvt. Ltd. Fifth Edition.
6. K.R.Gopalakrishna”Fundamentalsof Drawing” Subhas Publications, 2010.
7. Computer Aided Engineering Drawing By SapnaPubications.

Websites:

1. http://www.we-r-here.com/cad/tutorials/index.htm
2. http://www.cadtutor.net/tutorials/autocad/
3. http://www.caddprimer.com/AutoCAD_training_tutorial/AutoCAD_training_lessons.htm
4. http://www.autocadmark.com/
5. http://www.autocadtutorials.net/

Equipment List:

1. Latest Configuration Computers which can be able to run latest any Computer Aided Drafting Software. (At least One Computer per student in practical session)
2. Any latest Authorised Computer Aided Drafting Software (20 seats).
3. Plotter of size A2/A3
4. LCD Projector

Suggested List of Student Activities:

1. Students should to study the drawing of mechanical component, understand and draw it in CAD lab.
2. Each student should submit any one of the following type activity or any other similar activity related to the course and before take up get it approved from concerned Teacher and HOD
3. Each student should conduct different activity and no repeating should occur

Course Delivery:

The course will be delivered through Demonstration and CAD practice.

Scheme of Evaluation for End Exam

1. Writing about commands (UNIT-I and UNIT-II. 05
2. Create the model and drawing views along with dimensions and annotations as per sketch given (UNIT-III. 15
3. Create the model and drawing views along with dimensions and annotations as per sketch given (UNIT-IV. 15
4. Create the model and drawing views along with dimensions and annotations as per sketch given (UNIT-V. 15

Note:

1. Candidate shall submit Lab Record for the Examination.
2. Student should be allowed to execute directly even if she / he unable to write the procedure
3. In case of change in experiment or no write up, marks will not be awarded for writing procedure/steps.

Resource requirements for Computer Aided Engineering Drawing Lab

Hardware requirement

1. PC systems (latest configurations with speakers) 20
2. Laser Printers 02
3. Networking (Structured) with cat 6e / wireless 24 Port switches / Wireless Router I/O Boxes for networking(as required) 03
4. Broad Band Connection 01

Software Requirement:
Any CAD software.

Note:

1. Students: Computers ratio in the Lab should be strictly 1:1 for a batch of twenty Students.

For detail syllabus of all other subjects of BE Mechanical Hpt, C15 scheme do visit Mechanical Hpt 3rd Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.