15EI45P: VIrtual Electronics Simulation Lab Instrumentation 4th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

VIrtual Electronics Simulation Lab detail DTE Kar Diploma syllabus for Electronics Instrumentation And Control Engineering (EI), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15EI45P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other instrumentation 4th sem syllabus for diploma c15 scheme dte karnataka you can visit Instrumentation 4th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for virtual electronics simulation lab is as follows.

Pre-requisites:

Basics of Electrical engineering , Analog electronics and Digital Electronics

Course Objectives:

1. To impart students with the knowledge all lab instruments used in measurements lab
2. To enable the students to learn different voltage regulators
3. To learn the measurement of ripple factor and efficiency of rectifier circuits.
4. To Study multiplexer and de-multiplexer using basic gates
5. To study the CE amplifier and OP Amp related experiments

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Part A

( Analog Electronics experiments )

1. Simulate the working of OPAMP as Integrator and Differentiator 6 Hours
2. Simulate the working of RC Phase shift oscillator 6 Hours
3. Simulate the working ofUJT relaxation Oscillator 6 Hours
4. Simulate to test the working of Clipping circuits 3 Hours
5. Simulate to test the working of Bridge rectifiers with and without filter& calculate the ripple factor 6 Hours
6. Simulate to test the working of single stage RC coupled amplifier and draw its Frequency response 6 Hours
7. Simulate to test the working of Op Amp (uA 741) circuit as Schmitt Trigger 6 Hours
8. Simulate to test the working of IC 555 timer as Astable multivibrator 6 Hours

Part B

( Digital Electronics experiments )

1. Simulate to test the Half Adder and Half Sub tractor using logic gates 3 Hours
2. Simulate and Verify the truth table of 1:4 De-multiplexer And 4:1 multiplexer 3 Hours
3. Simulate and Verify the truth table of 4 bit Shift Register (SISO, PISO) 3 Hours
4. Verify the truth table of Decade counter 3 Hours
5. Verify the truth table of 3 bit Ring counter / Johnson counter 3 Hours
6. Simulate to test the working of 4 bit binary weighted resistor DAC for voltage output (0-5V)
7. Simulate and test the working of 2 bit flash type A/D converter 6 Hours
8. Write a program to execute 8 bit addition & 8 bit subtraction using 8085 simulation software

Note:-Any open source software can be used

Reference Books:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Reference Books:

1. A course in Electrical and Electronics measurement and Instrumentation, A.K.sawhney 10th edition, Dhanpat Rai and sons.

FEW USEFUL WEBSITES WHERE STUDY MATERIALS CAN BE USED AS REFERENCE

1. http://www.allaboutcircuits.com/textbook/semiconduct zener-diodesors/chpt-3/zener-diodes/
2. http://www.allaboutcircuits.com/textbook/semiconductors/chpt-4/common-emitter-amplifier/
3. http://www.electronics- tutorials.ws/transistor/tran_5.html JFET
4. http://www.completepowerelectronics.com/ujt-unijunction-transistor-basics/
5. http://www.allaboutcircuits.com/textbook/semiconductors/chpt-7/silicon-controlled-rectifier-scr/
6. http://www.daenotes.com/electronics/devicescircuits/clipper-clamper
7. http://studentboxoffice.in/Topic.aspx?id=5 Bridge rectifiers without filter
8. https://www.elprocus.com/working-theory-of-an-rccoupled-amplifier/
9. http://www.circuitstoday.com/schmitt-trigger-using-op-amp
10. http://www.circuitsgallery.com/2012/03/rc-phase-shift-oscillator-using-741-op.html
11. https://electrosome.com/astable-multivibrator-555-timer/
12. http://www.electronicshub.org/half-adder-and-full-adder-circuits/
13. http://www.electronicshub.org/binary-adder-and-subtractor/
14. http://www.daenotes.com/electronics/digital- electronics/flip-flops-types-applications-woking Clocked RS Flip Flop
15. http://electrofriends.com/articles/electronics/microcont roller-electronics-articles/8051-8951/interfacing-7segment-display-using-7447-decoder/
16. http://www.electronicshub.org/multiplexer-and-demultiplexer/
17. http://www.electronics- tutorials.ws/sequential/seq_5.html Shift Register 7495
18. http://www.engineersgarage.com/electronic- components/74ls90-ic-datasheet 74ls90-ic
19. http://www.flintgroups.com/2012/10/half-subtractor-and-full-subtractor.html

FEW SUGGESTED STUDENT ACTIVITY:-

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Course Delivery:

The course will be delivered through lectures and presentations

SCHEME OF VALUATION

1. Part A:- Analog circuit Writing circuit diagram, Tabular column/ waveform (one experiment. 10

Part B:- Digital circuit Writing Logic diagram, truth table (one experiment. 10

2. Simulate and Conduct either from Part A or Part B ( one experiment. 10
3. Result 10
4. Viva voce 10

EQUIPMENT LIST:

1. Latest Configuration Computers 10 Nos
2. Printers 02 Nos
3. Open source Software

For detail syllabus of all other subjects of BE Instrumentation, C15 scheme do visit Instrumentation 4th Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.