15EE02P: Basic Electrical and Electronics Lab Chemical 1st Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Basic Electrical and Electronics Lab detail DTE Kar Diploma syllabus for Chemical Engineering (CH), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15EE02P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other chemical 1st sem syllabus for diploma c15 scheme dte karnataka you can visit Chemical 1st Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for basic electrical and electronics lab is as follows.

Pre-requisites:

Basic Electrical and Electronics Engineering theory

Course Objectives:

To provide practical knowledge about the DC & AC circuits, different wiring circuits, UPS, Battery, Relay, three phase AC motor, semiconductor diodes, rectifiers and basic logic gates.

List of Experiments:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Reference Books:

1. Experiments in Basic Electrical Engineering by S. K. Bhattacharya, New Age International Publications, 2007 Edition.
2. A Text book on Laboratory courses in Electrical Engg. by S.G. Tarnekar and P. K. Karbanda.

e-Resources

1. http://www.scribd.com/doc/39578646/New-First-year-Electrical-lab-manual#scribd
2. http://mrcet.ac.in/newwebsite/pdfs/Labmanuals-13/ECE/LabManuals/ DC%20LAB% 20%28180%29%20II-I.pdf

Course Delivery:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Tutorial – 1Hr:

Staff-in-charge must

1. Explain the concept of experiment to be conducted.
2. Teach required selection of components/ meters/ equipments/ suitable wires for the experiment to be executed.
3. Ask students to draw the circuit.
4. Give clear instructions about safety precautions to be followed while conduct experiment.

Conduction/ Execution – 2 Hr:

1. Student must rig up the circuit diagram and conduct experiment individually under the supervision of staff-in-charge.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

LAB EQUIPMENTS REQUIREMENT

1. Dual Channel 30 V, 2 A continuously variable DC Regulated Power Supply with Current and Overload Protection 05 Nos.
2. +/- 15 V, 2 A, fixed DC Regulated Power Supply 05 Nos.
3. Portable Moving Coil DC Voltmeters
1. 0 – 1 V
2. 0 – 10 V
3. 0 – 30 V Each 05 Nos.
4. Portable Moving Iron AC Voltmeters
1. 0 – 300 V
2. 0 – 600 V Each 05 Nos.
5. Portable Moving Coil DC Ammeters
1. 0 – 100 mA
2. 0 – 1 A
3. 0 – 2 A Each 05 Nos.
6. Portable Moving Iron AC Ammeters
1. 0 – 2 A
2. 0 – 5 A
3. 0 – 10 A Each 05 Nos.
7. Watt-meters
1. 150/ 300V, 2 A, UPF
2. 300/ 600 V, 5/ 10 A, LPF Each 02 Nos.
8. Rheostats – 25 Ohms, 50 Ohms, 150 Ohms, 220 Ohms (all rated at 3 A. Each 05 Nos.
9. Rheostat Loads s – 1 KW, 230 V 02 Nos.
10. Wire wound Resistors- 5 Ohms 2 Watts, 25 Ohms 5 Watts, 330 Ohms 2 Watts, 560 Ohms 2 Watts, etc. Each 05 Nos.
11. Soldering Iron 60 W 05 Nos.
12. Fluorescent lamp sets 10 Nos.
13. Single Phase Energy meter 10 A, 230 V, 50 Hz, Digital type 05 Nos.
14. Multi-meter Digital %’ 06 Nos.
15. Duel Trace Oscilloscope – 30 MHz 02 Nos.
16. Three Phase Induction Motors – 440 V 50 Hz 1 HP, 440 V 50 Hz 2 HP Each 02 Nos.
17. Three phase DOL, Star-Delta, Auto transformer starter Each 02 Nos.
18. UPS 1 KVA 01 Nos.
19. Battery Lead-Acid type, 140 A-hr and Hydrometers 02 Nos.
20. I C Trainer kit 05 Nos
21. Digital IC’s 7400, 7402, 7404, 7408, 7486 etc Each 10 Nos.
22. Wooden Wiring board (2×3) ft 10
23. Wiring accessories
1. PVC conduit – %’ -10 lengths
2. Cap and casing – %’ – 10 lengths
3. Switches Single Pole- 5A, 230 V
4. Switches two way – 5 A, 230 V
5. 3 Pin Sockets 5A, 230 V
6. Bulb Holders -5 A, 230 V
7. 3 Pin Plug 5A, 230 V
8. 60 Watts Lamps
9. 100 Watts Lamps
10. 15 W CFL lamps
11. Copper Wires of sizes 1.5 mm2, 2.5 mm2, 4 mm2 – 1 coil each
12. Gang boxes (1+1, 2+1, 2+2)
13. Kit -Kat fuses 5A, 15 A
14. MCB 16 A & 32 A/ 230 V, Single and Double Pole
15. ELCB 16 A & 32 A/ 230 V, Double Pole
16. Neutral link- 16 A, 230 V
17. Screws of assorted sizes
18. Testers Each 10 Nos.
24. Electronic Components
1. Diodes – BY 127 and IN 4001
2. Zener Diodes -6.2 V, 5.6 V, 7.8 V
3. Relays -solid state Sugar cube type, SPST, Coil 6V,Power circuit 230 V, 5 A.
4. Spring Boards
5. Bread Boards
6. Tag Boards. Each 10 Nos.
25. Simple PANEL BOARD/ CUBICAL consisting of busbars, CB/MCB/ELCB, meters, HRC fuses, magnetic contactors, cables, earthing points. 1 No

For detail syllabus of all other subjects of BE Chemical, C15 scheme do visit Chemical 1st Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.