15EC64P: Industrial Automation Lab Electronics 6th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Industrial Automation Lab detail DTE Kar Diploma syllabus for Electronics And Communication Engineering (EC), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15EC64P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other electronics 6th sem syllabus for diploma c15 scheme dte karnataka you can visit Electronics 6th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for industrial automation lab is as follows.

Pre-requisites:

Knowledge of electronic devices and logic systems

Course Objectives:

1. Compare the semiconductor devices with power electronics devices.
2. Applications of power control devices
3. Design and simulate PLC circuits

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit-1: Tutorials and Graded Exercises 72 Hours

Part-A: Power electronics devices experiments

1. Determination of holding current and break-over voltage of an SCR. 3
2. Full-wave controlled rectifier circuit using R-C triggering circuit 3
3. Light dimmer circuit using DIAC and TRIAC. 3
4. SCR triggering by UJT relaxation oscillator (Using Kit. 3
5. Voltage commutated chopper both constant frequency & variable frequency. (Using Kit. 3
6. Single phase to single phase cycloconverter (Using Kit. 3
7. Speed control of Universal motor. (Using Kit. 3
8. Speed control of stepper motor using inverter in clockwise & anti-clockwise direction. (Using Kit. 3
9. Sequential timer using IC 555. 3
10. Servicing/Maintenance of UPS (Only study experiments. 6

Part-B: PLC Programming experiments

1. Study of PLC kit, practicing of basic programs. 3
2. Write the ladder diagram to test digital logic gates ( two, three and four inputs. 6
3. Write the ladder diagram for three variable Boolean expressions and test the output. Example: Y= (A+B+C)+(BC) and Z=(AB+C)+(B+C). 3
4. Write the ladder diagram to verify Demorgan’s theorem. 3
5. Write the ladder diagram for DOL starter and test the output 3
6. Writing the ladder diagram and execute the Stair case light application 3
7. Writing the ladder diagram and execute the Water level controller application 3
8. Writing theladder diagram andexecute the Conveyer control application 3
9. Writing the ladder diagram and execute the Lift control application. 6

Unit 2: Student Activities [CIE- 05 Marks] 6 Hours

1. Visit and study the applications of Thyristors used in any nearby electrical power station. 06
2. Design the simple industrial electronics circuit/application by using any power semiconductor devices such as Thyristors, power diode, BJT, MOSFET etc.

Execution Mode

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Institutional Activity (No marks)

The following are suggested institutional activities, to be carried out at least one activity during the semester. The course teacher/coordinator is expected to maintain the relevant record (Containing, Activity name, Resource persons and their details, duration, venue, student feedback, etc) pertaining to Institutional activities.

1. Organize hands-on practice on design and implementation of Power electronic circuits, PLC and SCADA.
2. Organize a seminar/Guest lecture on Industrial applications of Thyristors.

Reference Books:

1. Overview of Industrial Process Automation – KLS Sharma, Elsevier Publication
2. Power Electronics handbook, 3rd edition-Muhammad H. Rashid- Elsevier, ISBN: 978-0-12382036-5
3. Programmable Logic Controllers- John W.Webb and Ronald A Reis (Principle and applications)(Fifth Edition).
4. Programmable Logic Controllers -Programming Methods and Applications, John R. Hackworth and Frederick D. Hackworth, Jr.
5. http://www.engineersgarage.com/articles/plc-programmable-logic-controller
6. https://en.wikipedia.org/wiki/Programmable logic controller
7. https://www.circuitlogix.com
8. www.electronicprojects.org/
9. http://www.asic-world.com/
10. http://www.electronics-tutorials
11. http://www.circuitstoday.com
12. http://www.allaboutcircuits.com
13. http://ezhil-ecesait.webs.com/Power-Electronics-Lab-Manual.pdf

Course Delivery:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Student Activity (5 marks)

The student activities in Unit-2 or similar activities can be assigned

Laboratory Resource Requirements

Equipments and kits Requirement: For a batch of 20 students

1. Industrial electronics Trainer kits 05 each
2. PLC Trainer Kit with the following modules:
1. DOL starter
2. Stair case light application.
3. Water level controller application
4. Conveyer control application
5. Lift control application. 05 each
3. Patch cards( different lengths) 100
4. Dual trace oscilloscope. 05
5. Digital multimeters 05
6. Tachometers 05

Model Questions for Practice and Semester End Examination

Note: The questions in the question bank are indicative but not exhaustive.

Part-A

1. Determine holding current and break-over voltage of a given SCR experimentally.
2. Construct Light dimmer circuit using DIAC and TRIAC and verify the result.
3. Demonstrate Full wave controlled rectifier circuit using RC-triggering circuit.
4. Design Voltage commutated chopper both constant frequency & variable frequency.
5. Design the circuit of SCR trigged by UJT relaxation oscillator.
6. Verify the output for Single phase to single phase cycloconverter circuit .
7. Construct and verify the output for Speed control of Universal motor.
8. Construct and verify the output for Speed control of stepper motor using inverter in clockwise & anti-clockwise direction.
9. Construct the Sequential timer using IC-555 and verify the output.

Part-B

1. Write the ladder diagram to test digital logic gates (two, three and four inputs).
2. Write the ladder diagram for three variable Boolean expressions and test the output. Example: Y= (A+B+C)+(BC) and Z=(AB+C)+(B+C).
3. Write the ladder diagram to verify Demorgan’s theorem.
4. Write the Ladder diagram for DOL starter and test the output.
5. Write the ladder diagram and execute the Stair case light application.
6. Write the ladder diagram and execute the Water level controller application.
7. Write the ladder diagram and execute the Conveyer control application.
8. Write the ladder diagram and execute the Lift control application.

For detail syllabus of all other subjects of BE Electronics, C15 scheme do visit Electronics 6th Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.