15AT33P: Automobile Transmission and Control Systems Lab Auto 3rd Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Automobile Transmission and Control Systems Lab detail DTE Kar Diploma syllabus for Automobile Engineering (AT), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15AT33P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other auto 3rd sem syllabus for diploma c15 scheme dte karnataka you can visit Auto 3rd Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for automobile transmission and control systems lab is as follows.

Pre-requisites:

Knowledge of Automobile transmission and control systems being studied in III semester.

Course Objectives:

Understand the complete procedure of dismantling, cleaning, and inspection, fault finding/rectifying and reassembling of components of Automobile transmission and control systems.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT-I

Tutorials:

Tutorial class for every graded exercise should include the followings.

1. Precautions to be taken during conduction of each exercise.
2. Proper tools to be used and sequence to conduct each exercise.
3. Any measurements/adjustments to be made in each exercise.
4. Discussion on trouble shooting of each system.

UNIT-II

Lab exercises

1. Overhauling of a Single plate clutch. (coil spring type. 03
2. Overhauling of a Single plate clutch. (Diaphragm spring type. 03
3. Overhauling of a multi-plate clutch. 03
4. Overhauling of a constant-mesh Gear-box & calculation of gearratio’s w.r.t number of teeth. 06
5. Overhauling of a synchro-mesh Gear-box & calculation of gearratio’s w.r.t number of teeth. 06
6. Overhauling of a Transfer case. 03
7. Overhauling of a Propeller shaft & universal joint 03
8. Overhauling of a Final drive & Differential with backlash adjustment, & calculation of Final drive gear ratio 09
9. Overhauling of a front axle & hub greasing 03
10. Overhauling of a Steering gear box with Backlash, End-play adjustment & calculation of steering gear ratio. ( minimum any three different types of steering gear box. 09
11. Overhauling of an Independent suspension system 03
12. Overhauling of a Leaf spring & re-chambering. 03
13. Overhauling of a mechanical brake with free-play & brake shoe adjustments. 03
14. Overhauling of a drum brake 03
15. Overhauling of a disc brake 03
16. Overhauling of a Master cylinder & wheel cylinder. 06
17. Bleeding of hydraulic brake system, free-play & brake shoe adjustments. 03
18. Measurement of Wheel base, wheel track, Toe-in, Toe-out, over length, over all height, front over-hang, rear over-hang, ground clearance. 03
19. Checking the alignment of chassis frame. 03

Course Delivery:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Reference Books:

1. Mechanic Motor Vehicle Trade theory and Practical National Instructional Media Institute, Chennai
2. Automobile Engineering Practices. N.Malhotra Asian publishers
3. Vehicle Maintenance &Garage Practice Jigar A Doshi PHI Learning,Delhi
4. Automotive Mechanics W. H. Crouse & Anglin Tata MCgraw-Hill
5. Diesel Engineering Sean Bennett CENGAGE Learning
6. Automotive Technology Jack Erjavec CENGAGE Learning
7. Automobile Engineering. Harban Singh Rayath S Chand
8. Charts and cut section models

Important Note:

1. Overhauling includes Dismantling, Cleaning, Inspection, Repair / Replacement of worn parts, reassembling with necessary adjustments.
2. For every Exercises mention the detailed Trouble shooting chart in the Lab records.
3. The lab-record must have the following contents for each exercise :
1. Aim
2. Tools & Equipments required
3. Procedure
4. Precautions if any
5. Results / Reports
6. Troubling shooting chart.

TOOLS & EQUIPMENT LIST REQUIRED FOR THE LAB

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

LIST OF COMPONENTS REQUIRED

1. Single plate clutches ( Coil & Diaphragm spring type )
2. Multi plate clutch
3. Gear boxes (constant & synchromesh mesh )
4. Transfer case
5. Propeller shaft assembly
6. Rear axle assembly with wheels
7. Front axle assembly with wheels
8. Steering gearbox assemblies ( different types )
9. Chassis frame with Independent & leaf spring suspension system
10. Mechanical brake assemblies
11. Hydraulic brake system.
12. Master Cylinder-Single piston and Tandem master cylinder.
13. Wheel cylinders-single piston and double piston.
14. Drum brake assemblies.
15. Disc brake assemblies.

For detail syllabus of all other subjects of BE Auto, C15 scheme do visit Auto 3rd Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.