15AR54D: Building Construction and Drawing. – III. Interior 5th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Building Construction and Drawing. – III. detail DTE Kar Diploma syllabus for Interior Decoration (ID), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15AR54D), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other interior 5th sem syllabus for diploma c15 scheme dte karnataka you can visit Interior 5th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for building construction and drawing. – iii. is as follows.

Pre-requisites:

Architectural graphics, Materials of construction, Building construction and drawing

Course Objectives:

The course aims at enabling the students to

• Study the various building components and their functions.
• Prepare detailed construction drawings of various building components.
• Apply the knowledge of appropriate application of various materials in building construction.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT I : PLASTERING AND POINTING 09 Hrs

Necessity of Plastering , Types and methods of plastering., Special materials used in plastering , Defects in plaster works ,Types and methods of pointing., Types of finishes.

UNIT II:DAMP PROOFING AND WATER PROOFING 06 Hrs

Definition, sources or causes for dampness, Effects of dampness, Materials used for damp proofing, Techniques & Methods of damp prevention, Water proofing methods for basement, concrete flat roof & sloped roof.

UNIT III: PARTITION WALLS 15 Hrs

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT IV: TEMPORARY SUPPORTING STRUCTURES 15Hrs

1. Formwork :- Definition, Requirements & material used for formwork, Formwork for wall & column footings, RCC columns, beams , slab & stairs.
2. Scaffolding: – Definition, Parts of scaffolding, types of scaffolding, Materials used for scaffolding.
3. Shoring :- Definition & types of shoring.

UNIT V: SUSPENDED CEILINGS AND WALL PANELLING 21 Hrs

1. Suspended ceiling :- Definition, Advantages, Materials used for false ceiling, construction method for exposed grid & concealed grid(seamless) false ceiling.
2. Wall panelling :- Definition, Advantages, Materials used for wall panelling, Construction method for wall panelling

UNIT VI: MISCELLANEOUS STRUCTURES 12 Hrs

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Text Books:

1. Building construction by S.C.Rangwala
2. Building construction by Sushil kumar
3. Building construction by S.S. Bhavikatti
4. Building construction and drawing by W.B.Mckay
5. Building construction and drawing by M.G shah and kale
6. Building construction by S.P.Arora and S.P.Bindra

WEB LINKS

1. https://evrosoriou.files.wordpress.com/../construction-handbook-chudle/
2. https://www.youtube.com/watch?v=9ROrmRYOwf4/

1. PREPARATION OF DRAWINGS COVERING ABOVE CONTENTS

1. Plate 1- Prepare sketches of damp proofing & water proofing at different parts of a building like foundation, floor, lintel, roof etc.,
2. Plate 2- Prepare plan, elevation and section of partition using Industrial timber.
3. Plate 3- Prepare plan, elevation and section of aluminium partition.
4. Plate 4- Prepare plan, elevation and section of partly glazed partition.
5. Plate 5- Prepare sketches of shoring (Raking, flying and dead shore).
6. Plate 6- Prepare reflected ceiling plan and cross section of exposed grid false ceiling using GI sections and acoustical tiles.
7. Plate7 – Prepare reflected ceiling plan and cross section of concealed (seamless) grid false ceiling using GI sections and gypsum board.
8. Plate 8-Prepare plan, section and elevation of a wall panelling using Industrial timber.
9. Plate 9-Prepare plan, section and elevation of an exterior wall using Structural glazing.
10. Plate 10-Prepare plan, section, and elevation of a canopy with pergola.

Note: Minimum one plate on each topic to be considered for CIE. Site visits to be arranged by course co-ordinator.

Suggested List of Student Activities:

1. Each student should do any one of the following type activity or any other similar activity related to the course and before conduction, get it approved from concerned Teacher and HOD.
2. Each student should conduct different activity and no repeating should occur.

1. Visit to a ongoing construction site and make a note on methods of damp proofing and water proofing
2. Visit to a ongoing construction site and submit a detailed hand written report along with photographs on any one of following topic:
1. False ceiling
2. Wall paneling
3. Curtain wall
3. Prepare a hand written report on Shell and Pre fabricated concrete structures .

Course Delivery:

• The course will be delivered through lectures and Power point presentations/ Videos.
• Teachers can prepare or download ppt on different topic’s of Architectural engineering application, can prepare alternative slides.

Model Question Paper:

PART-A 8X5=40

1. Discuss the purpose of plastering.
2. Distinguish between plastering and pointing.
3. Explain briefly the method of water proofing of flat roof with neat sketch.
4. What are the requirements of good partition wall?
5. Explain brick partition wall with neat sketch.
6. Discuss the advantages of steel form work over wooden formwork.
7. Define scaffolding. List different types of scaffolding.
8. What is shoring ? Explain briefly any two types of shoring.
9. What is suspended ceiling? Discuss its advantages.
10. Explain construction method of wooden wall panelling with a neat sketch.
11. Discuss the purpose and advantages of Pre fabricated structures.
12. Write a note on Retaining wall.

PART-B 3X20=60

1. Draw partly glazed partition wall measuring 5.0M wide and 3.0M ht. for an Architect office to a suitable scale. Assume necessary data. Draw the following.
1. Plan
2. Elevation
3. Section
4. Any one enlarged fixing detail
2. Design false ceiling for a showroom of size 10.0Mx5.0M using GI sections and gypsum board to a suitable scale. Draw the following.
1. Reflected ceiling plan
2. Section
3. One enlarged fixing detail
3. Draw wall paneling using Industrial timber for a wall of size of 4.0M wide and 3.0M ht. to a suitable scale. Assume necessary data. Draw the following.
1. Sectional plan
2. Elevation
3. Longitudinal Section
4. One enlarged detail
1. Draw sectional elevation of Damp proofing a wall at roof level to a suitable scale.
2. Draw sectional elevation of waterproofing the basement to a suitable scale
5. Design structural glazing of a size 20.0MX20.0M for a commercial building to a suitable scale. Assume necessary data.

Draw the following.

1. Plan
2. Elevation
3. Section
4. Any one fixing enlarged detail.

For detail syllabus of all other subjects of BE Interior, C15 scheme do visit Interior 5th Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.