15AN66P: Project Work-II Aero 6th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Project Work-II detail DTE Kar Diploma syllabus for Aeronautical Engineering (AE), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15AN66P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other aero 6th sem syllabus for diploma c15 scheme dte karnataka you can visit Aero 6th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for project work-ii is as follows.

Pre-requisites:

Application learned concepts form the previous semester studied courses.

Course Objectives:

1. Learn the objective of this project is to provide opportunity for the students to implement their skills acquired in the previous semesters to practical problems/problems faced by industry/development of new facilities
2. Make the students come up with innovative/ new ideas in his area of interest.
3. Identify, analyze and develop opportunities as well as to solve broadly defined mechanical Engineering problems
4. Enhance students’ appreciation of the values of social responsibility, legal and ethical principles, through the analysis and discussion of relevant articles and real time projects

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

1. PROJECT WORK:

78 HRS

INTRODUCTION

The objective of the project work is to enable the students in convenient groups of minimum of 5 members on a project involving theoretical and experimental studies related to the branch of study. Every project work shall have a guide who is the member of the faculty of the institution. Six periods per week shall be allotted in the time table and this time shall be utilized by the students to receive the directions from the guide, on library reading, laboratory work, computer analysis or field work as assigned by the guide and also to present in periodical seminars on the progress made in the project.

ROAD MAP FOR THE PROJECT

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Thrust areas identified for Project work

Each student maybe assigned any one of the following types of project/thesis work:

According to the local needs, the following major projects are suggested:

1. Fabrication of wing structure showing all internal parts
2. Fabrication of fuselage structure showing all internal parts
3. Fabrication of Monocoque structure showing all internal parts
4. Fabrication of Semi- Monocoque structure showing all internal parts
5. Fabrication of flight control system -mechanical
6. Fabrication of flight control system -hydraulic
7. Fabrication of flight control system -pneumatic
8. Working model of landing gear system
9. Working model of Helicopter flight control system.
10. Working model of tail rotor and blade pitch control for helicopter
11. Fabrication of flap system

G. Project report

The Project Report should consist of following items.

1. Introduction
2. Review of Literature
3. Study Area
4. Methodology/Design/fabrication/Tests
5. Result and Discussion
6. Conclusion and scope for future study
7. References.

1. Project reports should be typed neatly in Times New Roman letters with font size 14 for titles and 12 for text on both sides of the paper with ‘5.’ line spacing on a A4 size paper (210 x 297 mm) The margins should be: Left – 5.”, Right – 1″, Top and Bottom – 7.5″.
2. The total number of reports (Soft bound) to be prepared are
1. One copy to the department /library
2. One copy to the concerned guide
3. One copy to the candidate.
3. Before taking the final printout, the approval of the concerned guide is mandatory and suggested corrections, if any, must be incorporated.
4. Every copy of the report must contain
1. Inner title page (White)
2. Outer title page with a plastic cover
3. Candidate declaration and Certificate in the format enclosed both from the institution and the organization where the project is carried out.
4. An abstract (synopsis) not exceeding 100 words, indicating salient features of the work.
5. The organization of the report should be as follows
1. Inner title page
2. Abstract or Synopsis
3. Acknowledgments
4. Table of Contents
5. List of table & figures (optional)

Chapters(to be numbered in Arabic) containing Introduction-, which usually specifies the scope of work and its importance and relation to previous work and the present developments, Main body of the report divided appropriately into chapters, sections and subsections.
The chapters, sections and subsections maybe numbered in the decimal form for e.g. Chapter 2, sections as ‘1.’, ‘2.’ etc., and subsections as ‘2.3’, ‘5.1’ etc.
The chapter must be left or right justified (font size 16). Followed by the title of chapter centered (font size 18), section/subsection numbers along with their headings must be left justified with section number and its heading in font size 16 and subsection and its heading in font size 14 The body or the text of the report should have font size 12
The figures and tables must be numbered chapter wise
The last chapter should contain the summary of the work carried, contributions if any, their utility along with the scope for further work. Reference or Bibliography: The references should be numbered serially in the order of their occurrence in the text and their numbers should be indicated within square brackets for e.g. [3]. The section on references should list them in serial order in the following format.

1. For textbooks – Dr.Paramar S, Welding process and technology, Khanna publishers, New Delhi, 2 Edition, 2003.
2. For papers – Y.Javadi and I.sattari, Welding distortion in pipes, Journal of pressure vessels and piping, Vol 85, Aug 2008, pp 337-343

Only SI units are to be used in the report. Important equations must be numbered in decimal form.
All equation numbers should be right justified.
Separator sheets, used if any, between chapters, should be of thin paper

CIE ASSESSMENT FOR FINAL REVIEW(VI semester)

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

SEE ASSESSMENT:

1. Relevance of the subject in the present context 05 mark
2. Literature Review 05 mark
3. Fabrication of the model/Data collection/repair and Overhauling work/creation 25 mark
4. Results & Discussion 05 mark
5. Presentation/viva 10 mark

APPENDICES

Folllow the text from pdf file.

For detail syllabus of all other subjects of BE Aero, C15 scheme do visit Aero 6th Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.