15AN64A: Aircraft Inspection, Maintenance and Repair Aero 6th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Aircraft Inspection, Maintenance and Repair detail syllabus for Aeronautical Engineering (49), C15 scheme is taken from DTE Karnataka official website and presented for diploma students. The course code (15AN64A), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below.

For all other aero 6th sem syllabus for diploma c15 scheme dte karnataka you can visit Aero 6th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. For all other Elective-II subjects do refer to Elective-II. The detail syllabus for aircraft inspection, maintenance and repair is as follows.

Pre-requisites:

Fluid mechanics and Pneumatics, Aircraft systems

Course Objectives:

It aims at enabling the student to understand inspection, maintenance practices for different parts of aircraft

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT I: INTRODUCTION OF TYPES OF AIRCRAFT INSPECTION AND DOCUMENTATION CO1 8 Hrs

1. Importance & purpose of aircraft inspection & Documentation
2. Inspection of aircraft for heavy landing- Tyres, landing gear equipment
3. Bird strikes: Extent of damage, assessment of repairs to be done
4. Familiarization with aircraft documents ATA100 Specifications
5. Lay out and contents of aircraft maintenance manual,
1. Structural repair manual,
2. Illustrated parts catalogue,
3. Airworthiness directive, service bulletins,
4. Maintenance planning documents /inspection schedule.
6. Entries to be made in aircraft log book: change of parts, fuel/ oil replenishment

UNIT II: AIR CONDITIONING, PRESSURISATION, EQUIPMENT AND FURNISHINGS CO2 8Hrs

1. Air conditioning and pressurization
1. Discussion on importance and purpose
2. Inspection of structure in Air-conditioning bay
3. Installation of air-conditioning components
4. Security of air-conditioning components
5. Pneumatic leak check
6. Oil level check for ACM
7. Compressor Freon gas level check
2. EQUIPMENT AND FURNISHINGS
1. Basic inspection of equipment and furnishing
2. Installation of passenger and crew seats, safety harness
3. Operational check and inspection of life jacket and life raft
4. Inspection of fire bottle and portable oxygen bottle in the cabin
5. Presence of emergency equipment

UNIT III: FIRE DETECTION &EXTINGUISHING SYSTEM, ICE & RAIN PROTECTION SYSTEM CO3 8 Hrs

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT IV: INSPECTION OF AIRCRAFT SYSTEMS CO4 10Hrs

1. FLIGHT CONTROL SYSTEMS
1. Flight control system – Importance and purpose
2. Inspection of :

a. Control cables for wear
a. Linkages for correct sense of operation
a. Play due to wear
a. Condition of control surfaces for de-lamination and damage, travel and neutral portion check of control surfaces.

2. AIRCRAFT FUEL SYSTEM
1. Aircraft fuel system – Introduction & importance of inspection and types of fuel
2. Precaution during Aircraft fuelling and defueling
3. Inspection of fuel leak
4. Aircraft fuel tank contamination check
5. Inspection of filters for contaminations
6. External inspection of fuel system
7. Fire hazard, static electricity and its effect
3. HYDRAULIC SYSTEM
1. Importance of Hydraulic system inspection.
2. Inspection of condition of hydraulic lines
3. Internal leak check of hydraulic components
4. Flow rate check
5. Precaution while servicing of hydraulic system
4. AIRCRAFT OXYGEN SYSTEM
1. Inspection of components and pipe lines for conditions and security
2. Leak check of oxygen system
3. Precaution to be observed while working with oxygen system

UNIT V: INSPECTION OF AIRCRAFT STRUCTURES, AIRCRAFT POWER PLANTS and LANDING GEAR SYSTEM CO5 12 Hrs

1. Inspection of
1. Nacelles /pylon attachment fittings, fillets/fairings
2. stabilizers (Vertical, Horizontal) for condition & Security
3. windows for crazing chips and cracks
4. static dischargers
5. doors for condition, security and doors warning system
2. Inspection of
1. Ignition system components for condition and functional check
2. thrust reverser system for leak
3. oil system for leak, component chip detector and filter check
3. Functional check of engine indication instruments
4. Power supply equipment -electric, pneumatic, air starting, air-conditioning, and hitting units
5. Precaution while servicing of aircraft oil system
6. Landing gear system – Importance of inspection
7. Inspection of
1. landing gear system components for condition and Security
2. Inspection of structures in the wheel well area
3. Pressure Vs Extension of shock strut
4. Wheel brakes for wear and over heat condition
5. Tyres for condition and wear, correct pressure inspections.
8. Consequences of over inflation and under inflation of aircraft landing gear type

UNIT VI: TOWING, MOORING, WEIGHING AND LEVELLING OF AIRCRAFT CO6 6Hrs

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

TEXT BOOKS

1. Michael J Kroes , William A Watkins , Frank Delp , Ronald Sterkenburg Aircraft Maintenance and Repair, Seventh Edition, 1 Jun 2013
2. FAA S Aviation Maintenance Technician’s Handbook (AC-65-9A)

Reference Books:

1. FAA’S Civil Aircraft Inspection Procedure CAIP-459 VOL-II

LIST OF SOFTWARE/LEARNING WEBSITES

1. http://www.faa-aircraft-certification.com/aircraft-inspections.html
2. http://www.aviation-safety-bureau.com/aircraft-inspections.html
3. https://www.youtube.com/watch?v=z6607nep8iU
4. https://www.youtube.com/watch?v=C3Xr5oJ7z2I
5. https://www.youtube.com/watch?v=rraLC4zTBtQ

Suggested List of Student Activities:

Note: the following activities or similar activities for assessing CIE (IA) for 5 marks (Any one)

1. Each student should do any one of the following type activity or any other similar activity related to the course and before conduction, get it approved from concerned Teacher and HOD.
2. Each student should conduct different activity and no repeating should occur

1. Prepare a report on any two NDT carried out on aircraft structure
2. Prepare a report on Various defects in the tire which is used in main landing gear
3. Prepare a report on pre flight and post flight inspection that are being carried out on passenger aircraft in INDIA
4. Prepare a report on aircraft weight and balancing
5. How do you conduct a test and balance a control surface on which structural repair was carried out.

Model Question Paper:

(CIE)

1. Explain ATA 100 specifications.
2. List the contents of an aircraft maintenance manual?
3. Indicate the purpose of air conditioning and pressurisation in an aircraft

OR
List the inspections carried out on aircraft structure in air conditioning bay

4. Explain the inflation test/operational checks of life jacket and life raft

OR
Explain the procedure of functional check of whole air conditioning system

Note: Choice may be given at the same CL to the maximum extent of 10 marks.

Model Question Paper:

PART-A (Each questions carries 5 marks)

1. List the purpose of air conditioning and pressurisation in an aircraft .
2. Explain airworthiness directives
3. Describe fires extinguishing agents used in various fire extinguishers?
4. List out the inspections carried out on control cables?
5. Explain the precautions to be observed while working with oxygen system?
6. List the consequences of over inflation and under inflation of aircraft tyre
7. Explain functions of aircraft landing gear.
8. List the inspections carried out on static discharger?
9. Explain the purpose of aircraft weight and balance control

PART-B (Each questions carries 10 marks)

1. Explain about likely damages on aircraft due to bird strike and assessment of repair to be done.
2. Define and explain:
1. Service bulletins
2. Inspection schedule
3. Structural re pair manual
4. Illustration parts catalogue
3. Explain the pneumatic check procedure of cabin pressurisation system
4. Explain fire extinguisher discharge circuit functional test.
5. Explain the inspection procedure of pneumatic de-icing system
6. List the precautions to be observed during aircraft refuelling and defueling.
7. Explain fuel tank contamination check procedure.
8. Explain the inspections carried out on windows, nacelles and stabilizers
9. Explain the inspection procedures carried out on ignition system
10. Explain mooring procedure

For detail syllabus of all other subjects of BE Aero, C15 regulation do visit Aero 6 syllabus for C15 Regulation.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.