Fluid Mechanics and Pneumatics Lab detail DTE Kar Diploma syllabus for Aeronautical Engineering (AE), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15AN24P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.
For all other aero 2nd sem syllabus for diploma c15 scheme dte karnataka you can visit Aero 2nd Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for fluid mechanics and pneumatics lab is as follows.
Pre-requisites:
Applied Science first semester, Fluid mechanics and Pneumatics theory.
Course Objectives:
To introduce the concept of hydraulic and Pneumatics systems and flow through pipes through observation and experiments.
Course Outcomes:
For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.
FLUID MECHANICS:
- Determine coefficient of friction in Pipes
- Performance characteristics of Centrifugal pump
- Performance characteristics of Reciprocating pump
PNEUMATICS LAB:
- Build pneumatic circuit for opening and closing the value of a pipe line with speed regulation (sketch enclosed) using
- Double acting Cylinder
- Throttle valves for speed regulation
- 4/2 D.C. value push button type with spring return
- Build pneumatic circuit for a “Tipping Device” for pouring the liquid from a vat (Sketch enclosed). Vat is filled and liquid in emptied by pressing a push button switch by releasing button switch Valve is returned to the up right position, use
- Double acting cylinder
- 4/2 D.C valve, Spring return push button type
- Throttle valves for forward and return speed regulation
- Build pneumatic circuit for a “Turning Device” in which hot billets are to be further transported on a conveyor back facing in the right direction (sketch enclosed) using
- Double acting cylinder
- 3/2 D.C. valve, push button type spring return
- 4/2 D.C. valve spring return
- Throttle valve as regulating element.
- Build pneumatic circuit for a “Clamping Device” in which articles are to be clamped using a clamping device (sketch enclosed)
- Double acting cylinder
- 2 nos of 3/2 D.C. valve push button spring return type
- 4/2 D.C. Impulse valve double pilot type
- Throttle valve
- Build pneumatic circuit for a “Gravity feed Magazine”
- Double acting cylinder
- Push button using return 3/2 D.C. valve
- Roller operated 3/2 D.C. valve for position sensing
- 4/2 D.C. impulse valve double pilot type
- Throttle valve
- Build pneumatic circuit for “diverting Device” in which articles are to be moved from one conveyor track to another conveyor track (sketch enclosed) by using
- Double acting cylinder
- 5/2 D.C. valve double pilot type
- Shuttle valve
- Push button spring return 3/2 D.C. value (3 nos)
- Throttle valve
- Build a pneumatic circuit for “Multi Track gravity feed Magazine (sketch enclosed) in which articles are to be pushed away from a multi track gravity feed magazine into a clamping device; using
- Double acting cylinder
- Quick exhaust Shuttle valve
- 4/3 D.C. valve
- Spring return push button 3/2 D.C. Valve
- roller operated 3/2 D.C. value for position sensing (fixed at the end of the cycle)
- Throttle valve
- Build pneumatic circuit for a “Cutting Device” for cutting sheets of paper are to be cut to size (sketch enclosed) by providing a conditional start (load magazine or safety guard in position) for a pneumatic cylinder to start by using
- Double acting cylinder
- 4/3 D.C. valve
- Twin pressure signal valve
- Spring return push button 3/2 D.C. valve (2 nos)
- Spring return roller operated 3/2 D.C. valve
- Build pneumatic circuit for “Hot Stamping die (sketch enclosed) for packing material to be sealed by application of heat and pressure (Here by pressing push button switch the heating rail is advanced and the packing material is pressed and heated along the adhesive strip after applying the heat for a period and the heating rail is returned to its starting position automatically) use the following
- Double acting cylinder
- 4/2 D.C. valve
- Throttle valve
- Time Delay throttle valve
- 3/2 D.C. valve spring return
- Push button spring return 3/2 D.C. valve
- Roller operated spring return 3/2 D.C. valve
- Build pneumatic circuit for “Conveyor Belt Control” (sketch enclosed) for articles to be transported in line as timed sequence to work
- Double, acting cylinder
- 4/2 D.C. valve (2 nos)
- Roller operated, spring return 3/2 D.C. valve (2 nos)
- Push button, spring return 3/2 D.C. valve (2 nos)
- Throttle valve
(Sketch enclosed) in which wooden blanks are to be pushed along from a gravity feed magazine to a clamping using
stations which are arranged in time in one after one another (when push button switch is pressed the main wheel is driven in sequence by the oscillating piston rod as a cylinder via pawl. When the push button switch is pressed again the drive is switched off) by using
Reference Books:
For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.
LIST OF EQUIPMENTS FOR FLUIID MECHANICS AND PNEUMATICS LAB
- FLOWTHROUGH PIPE FRICTION APPARATUS 01
- CENTRIFUGAL PUMP TEST RIG 01
- REACIPROCATING PUPMP TEST RIG 01
- PNEUMATIC TRAINER KIT WITH FOLLOWING COMPONENTS COMPONENTS 01
- Single acting air cylinder 01
- Double acting air cylinder 01
- Spring return push button 3/2 DC valve 03
- Spring return push button 4/2 DC valve 01
- Spring return push button 5/2 DC valve 01
- Throttle valves 02 02
- Impulse valve double pilot type 4/2 DC impulse valve 02
- Roller operated 3/2 DC valve 02 02
- 5/2 DC valve double pilot type 02
- Shuttle valve 02 02
- Quick exhaust shuttle valve l 4/3 DC valve 01 02
- Twin pressure signal valve 01
- Time delay throttle valve 01
- Air compressor for pneumatic trainer kit 01
- Digital Tachometer 01
Course Delivery:
The Course will be delivered through lectures, classroom interaction, discussion, experiments and observations.
For detail syllabus of all other subjects of BE Aero, C15 scheme do visit Aero 2nd Sem syllabus for C15 scheme.
Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.