Workshop Practice detail BTEUP syllabus for Computer Science And Engineering, effective from 2019-2020, is collected from BTEUP 2017 Syllabus official website and presented for diploma students. PDF download is possible from official site but you can download the istudy mobile app for syllabus on mobile. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.
For all other bteup syllabus 1st sem computer science 2019-2020 you can visit BTEUP Syllabus 1st Sem Computer Science 2019-2020 Subjects. The detail syllabus for workshop practice is as follows.
Rationale:
In order to have a balanced overall development of diploma engineers, it is necessary to integrate theory with practice. General workshop practices are included in the curriculum in order to provide hands-on experience about use of different tools and basic manufacturing practices. This subject aims at developing general manual and machining skills in the students. In addition, the development of dignity of labour, safety at work place, team working and development of right attitude are the other objectives.
Learning Outcomes:
After completing the course, the students will be able to:
- Identify tools and equipment used and their respective functions.
- Identify different types of materials and their basic properties.
- Use and take measurements with the help of basic measuring tools/equipment.
- Select proper tools for a particular operation.
- Select materials, tools, and sequence of operations to make a job as per given specification/drawing.
- Prepare simple jobs independently and inspect the same.
- Follow safety procedures and precautionary measures.
- Use safety equipment and Personal Protection Equipment.
Note: The students are supposed to come in proper workshop dress prescribed by the institute. Wearing shoes in the workshop is compulsory. Importance of safety and cleanliness, safety measures and upkeep of tools, equipment and environment in each of the following shops should be explained and practiced.
The students should prepare sketches of various tools/jobs in their practical Notebook.
The following shops are included in the syllabus:
- Fitting Shop
- Sheet Metal Shop
- Carpentry Shop
- Painting and Polishing Shop
1. FITTING SHOP
For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.
2. SHEET METAL SHOP
- Introduction to sheet metal shop, use of hand tools and accessories e.g. different types of hammers, hard and soft mallet, sheet and wire gauge, necessary allowance required during job fabrication, selection of material.
- Introduction and demonstration of hand tools used in sheet metal shop.
- Introduction and demonstration of various machines and equipment used in sheet metal shop e.g. Shearing Machine, Bar Folder, Burring Machine,
- Introduction and demonstration of various raw materials used in sheet metal shop e.g. black-plain sheet, galvanized-iron plain sheet, galvanised corrugated sheet, aluminium sheet etc.
- Study of various types of nuts, bolts, rivets, screws etc.
- Job Practice
- Job I: Shearing practice on a sheet using hand shears.
- Job II: Practice on making Single riveted lap joint/Double riveted lap Joint.
- Job III: Practice on making Single cover plate chain type, zig-zag type and single rivetted Butt Joint.
3. CARPENTRY SHOP
- General Shop Talk
- Name and use of raw materials used in carpentry shop : wood & alternative materials
- Names, uses, care and maintenance of hand tools such as different types of Saws, C-Clamp, Chisels, Mallets, Carpenter’s vices, Marking gauges, Try-squares, Rulers and other commonly used tools and materials used in carpentry shop by segregating as cutting tools, supporting tools, holding tools , measuring tools etc.
- Specification of tools used in carpentry shop.
- Different types of Timbers, their properties, uses & defects.
- Seasoning of wood.
- Practice
- Practices for Basic Carpentry Work
- Sawing practice using different types of saws
- Assembling jack plane Planning practice including sharpening of jack plane cutter
- Chiselling practice using different types of chisels including sharpening of chisel
- Making of different types of wooden pin and fixing methods. Marking measuring and inspection of jobs.
- Job Practice
- Job 1: Marking, sawing, planning and chiselling and their practice
- Job II: Half Lap Joint (cross, L or T – any one)
- Job III: Mortise and Tenon joint (T-Joint)
- Job IV: Dove tail Joint (Lap or Bridle Joint)
- Demonstration of job showing use of Rip Saw, Bow saw and Tenon saw, method of sharpening various saws.
4. PAINTING AND POLISHING SHOP
For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.
Means of Assessment:
- Workshop jobs
- Report writing
- presentation
- Viva voce
Text Books:
- Workshop Technology I,II,III, by SK Hajra, Choudhary and AK Choudhary; Media Promoters and Publishers Pvt. Ltd. Mumbai.
- Workshop Technology Vol. I, II, III by Manchanda; India Publishing House, Jalandhar.
- Workshop Training Manual Vol. I, II by S.S. Ubhi; Katson Publishers, Ludhiana.
- Manual on Workshop Practice by K Venkata Reddy; MacMillan India Ltd., New Delhi
- Basic Workshop Practice Manual by T Jeyapoovan; Vikas Publishing House (P) Ltd., New Delhi
- Workshop Technology by B.S. Raghuwanshi; Dhanpat Rai and Co., New Delhi
- Workshop Technology by HS Bawa; Tata McGraw Hill Publishers, New Delhi.
For detail syllabus of all other subjects of BE Computer Science, effective from 2019-2020 do visit Computer Science 1st Sem BTEUP syllabus for 2019-2020.
Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.