Surveying Architectural Assistantship 3rd Sem Syllabus for Diploma BTEUP 2017

Surveying detail BTEUP Diploma syllabus for Architectural Assistantship, effective from 2017 is collected from BTEUP 2017 Syllabus official website and presented for diploma students. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other architectural assistantship 3rd sem bteup diploma syllabus 2017 you can visit Architectural Assistantship 3rd Sem BTEUP Diploma Syllabus 2017 Subjects. The detail syllabus for surveying is as follows.

Rationale:

One of the main concern which is required to be carried out for the development of township, residential colonies, public buildings, etc. is the survey work. The technician architecture is supposed to have thorough knowledge of different methods of surveying and levelling, plotting of the survey work done and also setting out works for excavation. The technicians have to be skilled in the use of survey instruments by doing exercie. The paper aims at fulfilling the need.

DETAILED CONTENTS

1. CHAIN SURVEY:

Different kinds of chains, Principles of chain survey, Equipment and instruments. the field book, method of keeping the field book.
Obstacles in chain survey, Correction of length and areas due to error in chain length from standard length.

2. AREAS:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

3. COMPASS SURVEYING:

Prismatic compass, its use, whole circle bearings and reduced bearing. Magnetic variation, Local attraction and its elimination. Compass Traversing,Plotting, Closing error and its adjustment by graphical and other methods.

4. LEVELLING:

Theory of levelling, Entering the readings in level book, Computing of RL by “Line of collimation” method, “Rise & Fall” method. Curvature and Refraction, Reciprocal Levelling, Temporary and permanent adjustments of Dumpy levels, contours and their uses. Contour interval, Characteristics of contours, Methods of contouring

5. THEODOLITE:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

6. PLANE TABLE SURVEYING:

Purpose of plane table surveying, Equipment used in plane table survey, centering, levelling and orientation of plane table. Methods of plane table surveying – Radiation, Intersection, Traversing, Resection, Two point problem and Three point problems.

7. Total Station

(Brief Idea Only)
The use of Total Station in findings Horizontical and Vertical angles as well as finding out level in building elevation.

FIELD WORK

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

Chain Surveying

1. Ex i:
1. Ranging a line.
2. Chaining a line and recording in the field book.
3. Testing and adjustment of chain.
2. Ex ii: Chain survey of a small area. Plate 1
3. Ex iii: Chaining a line involving obstacles in ranging.
4. Ex iv: Use of Planimeter for computing areas

Compass Survey

1. Ex v:
1. Setting the compass and taking observations.
2. Measuring angles between the lines meeting at a point by prismatic compass.
2. Ex vi: Traversing with the prismatic compass and chain of a closed traverse. (recording and plotting by included angles) Plate 2
3. Ex vii: Determination of local attraction at a station by taking fore and back bearing.
4. Ex viii: To find true bearing of a line at a place.

Levelling

1. Ex ix: To find the difference of level between two distant points by taking staff readings on different stations from the single setting.
2. Ex x: To find the difference of level between two points by taking atlest four change points.

Plate 1

3. Ex xi: Setting a gradeint by IOP level.

Plate 1

4. Ex xii: Contouring of a small area by indirect methods

Plate 1

Plane Tabling

1. Ex xiii:
1. Setting the plane table Plate-1.
2. Marking the North direction.
3. Plotting a few points by radiation method.
2. Ex xiv:
1. Orientation by Plate-1.

– Trough compass
– back sighting.

2. Plotting a few points by intersection method.
3. Ex xv: Traversing an area with a plane table (at least four lines) Plate-1.
4. Ex xvi:
1. Two point problem. Plate-2.
2. Three point problem by

– Trail and error method. (Lehman’s Rule)

Theodolite

1. Ex xvii: Drill for taking out the theodolite, mounting on the tripod and placing it back in the box.
2. Ex xviii: Reading the vernier and working out the least count, measurement of horizontal angles by repetition method.

Plate 1

3. Ex xix: Measurement of vertical angles by the use of theodolite.

Total Station

1. Ex xx: Demonstration of Total Station
2. Ex xxi: Measurement of Levels in Building Elevation

For detail syllabus of all other subjects of BE Architectural Assistantship, effective from 2017 do visit Architectural Assistantship 3rd Sem BTEUP syllabus for 2017.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.