Strength of Material Env, Poll & Con 3rd Sem Syllabus for Diploma BTEUP 2017

Strength of Material detail BTEUP Diploma syllabus for Civil Engineering (Environmental Pollution & Control), effective from 2017 is collected from BTEUP 2017 Syllabus official website and presented for diploma students. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other env, poll & con 3rd sem bteup diploma syllabus 2017 you can visit Env, Poll & Con 3rd Sem BTEUP Diploma Syllabus 2017 Subjects. The detail syllabus for strength of material is as follows.

Rationale:

The subject is an important part of Civil Curriclum. Study of this subject enables the distinguish between different types of stresses in a material, under the action of external student will learn to analyse simple structural their design, which he usually needs in his
Engineering student to and strains forces. The elements for professional
life.The contents of the subject have been selected in such
a way as to form the basis of structural design proposed to be taught in the succeeding year.

DETAILED CONTENTS

1. Principal Stress and Principal Planes :

Principal stress and principal plane under direct and shear stress. Graphical determination by Mohr’s circle method.

2. Bending Moment and Shear Force:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

3. Bending and Shear Stresses

Assumption of theory of simple bending. Derivation of the equation. M/I=F/Y=E/R. Concept of centroid and second moment of area, Radius of gyration, Theorems of parallel and perpendicular axes, Second Moment of area for sections:rectangle, triangle,circle,trapezium,angle,Tee,I,Channel and compound sections. Moment of resistance, section modulus and permissible bending stresses, Bending stresses in circular rectangular, I,T and L section. Comparison of strength of the above sections. Concept of shear stresses in beams, Shear stress distribution in rectangular, I and T section .

4. Combined Direct & Bending Stresses:

Concentric and eccentric loads, eccentricity, effect of eccentric load on the section, middle third rule; stresses due to eccentric loads. Examples in the case of short columns, chimneys and dams.

5. Slopes and Deflections of Beams:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

6. Columns & Struts:

Definition of long column, short column and strut, slenderness ratio, equivalent length, critical load, collaps Load, End conditions of column. Application of Eular’s and Rankine’s formula (no derivation), simple numerical problems based on Euler’s and Rankine’s formulae.

7. Torsion

Definition of torque and angle of twist. Derivation of torsion equation. Polar moment of inertia.Strength of hollow and solid shaft, advantage of a hollow shaft over a solid shaft. Comparison of weights of solid and hollow shafts for same strength. Horse Power transmitted. Calculation of shaft diameter for a given Horse Power.

8. Fixed and Continuous Beam:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

LABORATORY WORK

1. Determination of shear force at different sections on a simply supported beam under points loads.
2. Determination of bending moment at different sections on a simply supported beam under different types of loading.
3. Determination of yield stress, ultimate stress, percentage elongation, plot the stress strain diagram and compute the value of Young’s Modulus of mild steel.
4. Determination of the maximum deflection and Young’s Modulus of elasticity by deflection apparatus.
5. Determination of modulus of rigidity of material by Torsion apparatus.
6. Determination of stiffness/deflection of a helical spring.
7. Determination of hardness of a metal plate by Rock Well Brinell hardness testing machine.
8. To perform impact test on Izod Impact testing machine.

For detail syllabus of all other subjects of BE Env, Poll & Con, effective from 2017 do visit Env, Poll & Con 3rd Sem BTEUP syllabus for 2017.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.