Project ECE 6th Sem Syllabus for Diploma BTEUP 2017

Project detail BTEUP Diploma syllabus for Electronics & Communication Engineering, effective from 2017 is collected from BTEUP 2017 Syllabus official website and presented for diploma students. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other ece 6th sem bteup diploma syllabus 2017 you can visit ECE 6th Sem BTEUP Diploma Syllabus 2017 Subjects. The detail syllabus for project is as follows.

GENERAL OBJECTIVE:

Purpose of the project work is :

1. To develop abilities of diagnosing problems.
2. To develop the abilities to :
1. Make literature survey.
2. Design/develop/frbricate/test simple circuits.
3. Prepare documents for electronic work.
4. Work as a team.

LIST OF PROJECTS (to be assessed internally)

1. To make simple circuit which will demonstrate the use of tranistor as a switch. ( The student should measure Ic and Vce in this circuit when Ib is varied from zero to a maximum value and measures the value of Ib (sat), Ic (sat), Vce (sat) and Hfe (min) for saturation at a given supply voltage and load.
2. To calculate the values and assemble and test simple transistor switching circuit to switch on a
1. LED.
2. Relay.
3. 200/500 ma. lamp. (6v/12v).
3. Make a battery eliminator
4. Make a battery charger.
5. Fabricate (including making PCB) and testing of regulated power supply (series and shunt circuit using zener diode and IC type).
6. Assembly and testing of a two band transistor radio receiver.
7. Fabrication and testing of any ICs of consumer interest, For example.
1. Fan regulater/Light dimmer.
2. Timer using IC 555.
3. Burglar’s alarm.
4. Digital clock.

The list is only suggestive, more items may be included

LIST OF PROJECTS

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

1. AMPLIFIERS:

1. Simple transistor / FET / IC amplifer to meet the given specifications.
2. Audio frequency mono/stereo amplifier including usual control facilities (including power amplifier and power supply stages).

2. OSCILLATORS:

1. Sine wave oscillators of given specifications using transistors/FETs/ICs (tuned oscillators, phase shift, including Wein’s Bridge oscillators).
2. Multivibrators of different types to produce square wave output signals of given specifications (Monostable, Bistable and Astable) using transistor FET or IC circuits.
3. Simple function generators.

3. POWER SUPPLIES:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

4. TIMERS AND OPERATIONAL AMPLIFIERS:

1. Timers of different types using 555/556 ICs.
2. Amplifiers, oscillators, active filters, differenciations, integrator, scale changer and other simple circuits using operational modules.

5. DIGITAL CIRCUITS:

1. Simple three digit counter.
2. 24 hour and 12 hour digital clock.
3. Electronic multimeter.
4. A/D and D/A convertors.
5. Interface circuits using Microprocessers.

6. MISCELLANEOUS CIRCUITS:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

7. RADIO RECEIVER:

1. Simple one or two band AM radio receiver.
2. Simple transreceiver.

8. Mobile Phone based devices and Microcontroller based devices.

NOTE:-

1. Depending upon the complexity of the work, the teacher may assign any number of project work to a group. The group size will also be similarly decided by the teacher, normally between 2 to 4 students per group.
2. The board may request all heads of Electronics Engineering Departments of U.P. Polytechnics to provide list of projects. An expert committee may be appointed to screen the project list.
3. The BTE (UP) may adopt the following format for the project report.

FORMAT

A project report ( of about 100 typed computer pages) should submitted covering the following points.

1. Basic design procedure for the project circuit.
2. Full block diagram and/or circuits diagram showing the component values.
3. Component layout diagram, including component and copper side details of the PCB used.
4. List of components used showing types voltage/current ratings, tolerance values and other specifications.
5. Details of heatsink used IC and Transistor pin connections and types of packages.
6. Front pannel layout and chassis details. (as relevant)
7. Test and measurement procedure.
8. Discussion on the deviation of the results from the given specifications.
9. Estimating and costing with discussion about selection of components from cost point of view.

NOTE:

For specialisation Digital Electronics and Microprocessors and Radio, Audio Video Engineering, Mobile Communication more project in these subjects should be given by the teachers.

For detail syllabus of all other subjects of BE Ece, effective from 2017 do visit Ece 6th Sem BTEUP syllabus for 2017.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.