Process Instrumentation Instrumentation & Ctrl 4th Sem Syllabus for Diploma BTEUP 2017

Process Instrumentation detail BTEUP Diploma syllabus for Instrumentation And Control, effective from 2017 is collected from BTEUP 2017 Syllabus official website and presented for diploma students. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other instrumentation & ctrl 4th sem bteup diploma syllabus 2017 you can visit Instrumentation & Ctrl 4th Sem BTEUP Diploma Syllabus 2017 Subjects. The detail syllabus for process instrumentation is as follows.

Rationale:

Precision measurement of process parameters such as pressure, level density, speed, temperature, flow, moisture etc. is very essential for successful running of a process industry. Various telemetric and mannual control circuits are to be handled by technicians employed in these industries. Therefore to equip the diploma student in instrumentation and control engineering with the knowledge and skill of principles and circuitry for measurement of these parameters will be useful in world of work.

DETAILED CONTENTS

1. INTRODUCTION:

1. Introduction of a process, chemical engineering process and process variable, listing of different process variable and their definitions, Introduction and definition of the term process instrumentation as applicable to the field of engineering.
2. Importance of process instrumentation for process industry-discussion taking example of any of the typical processes
3. Block diagram of a general instrumentation system, Elements of an instrument. Symbol used in instrumentation system and process flow diagram

2. PRESSURE INSTRUMENTATION:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

3. LEVEL INSTRUMENTATION:

1. Introduction, head, density and specific gravity their relationship, method of measurement.
1. Slight glass method.
2. Bob tape method.
3. Float method, Material for float, Float and shaft method.
4. Magnetic float.
5. Displacer with LVDT sensor method.
6. Displacer with hall effect sensor.
7. Sight glass method with magnetic strip voller
2. Indirect Method:
1. By pressure gauge.
2. Diaphrgm box method.
3. Air trap method.
4. Air pressure balance method or bubbler method.
5. Pneumatic force balance method.
6. Level measurement in a pressuried vessel using differential gauges and differential pressure gauges.
7. Level measurement of corrosive liquid by use of seal.
8. Level measurement by weighing.
9. Level of dry material.
3. Electrical Methods:
1. Electrical Conductivity method.
2. Capacitance method.
3. Radio active methods.
4. Ultrasonic method.
5. GWR (Guided Waves Radar)

4. MEASUREMENT OF SPEED:

Speed measurement, Tachometer (Contact type and non contact type – optical), stroboscopic counter, vibration reed method. Permanent magnet type, Key phaser type.

5. TEMPERATURE INSTRUMENTATION:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

6. FLOW MEASUREMENTS:

1. Definition of flow-Bornolli’s theroem.
2. Differential pressure flow meters-Expression for flow rate in terms of differential pressure. Types of restriction, orifice, nozzle, ventury tube, construction and material used. Comparison between orifice, nozzle and ventury tube measurement of differential pressure in flow lines.
3. Varible area meter (Rotameter) construction, working principle and its advantage over other method.
4. Positive displacement meter, Rotating lobe meter, Rotating vane meter, or Nutating disc meter reciprocating piston meter.
5. Velocity Flow Meter:
1. Turbine meter.
2. Hot wireflow meter.
3. Electromagnetic flow meter.
4. Ultrasonic flow meter.
6. Mass flow meter solid flow meter by weighting.
7. Flow through open channel:- Weirs and V-notch.
8. Methods of measurements of Fluid Flow by means of Orifice Plates and Nozzles, (for In-compressible fluids).

7. MOISTURE MEASUREMENT:

1. Definition:

Direct drying and weighing method.

2. Electrical Methods:

Conductance method, capacitance method.

3. Use of moisture in process industries.
4. Humidity measurement difinition, absolute humidity relative humidity, precentage humidity Dew point, dry bulb temperature, wet temperature, Dry and wet bulb hygrometer.

8. MEASUREMENT OF DENSITY

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

9. INSTALLATION :

Introduction, important symbols, method of installation of instrumentation system, Instrumentation flow diagram (few typical example). Installation method of different process element.

PROCESS INSTRUMENTATION LAB

1. To meaure pressure by various methods
1. Pressure Gauage (Burden, Bollow and diaphragm type)
2. Digital Pressure Indicator
3. Vaccum pressure by any available vacuum gauage and compare.
2. To measure and record pressure of line by graphic recorder and electronic pressure recorder.
3. To measure level of a tank by
1. Sight glass tube and flood method.
2. Capacitive level detector
3. resistive level detector.
4. To calibrate a pressure gauge using load weight tester and staudard pressure calibration.
5. To study the construction and operation of level limit siwtch and make an application circuit using level limit switch.
6. To draw the I/o characterstic of elex. pressure transmitter.
7. To measure speed of motor by
1. Mechanical tacometer
2. Optical tachometer
3. Inductive reductance type tachometer
8. To measure temperature of a furnace by various method.
1. thermometer
2. Thermocouple
3. Pyrometer (Total radiation and iptical pyrometer)
4. RTD
5. I.E. temperature sensor (Semiconductor type)
9. To record level/temperature using universal electronic meter.
10. To measure flow in a pipeline using
1. Orifice meter
2. Venturimeter
3. Rotameter
4. Electromagnetic flowmeter
11. To measure flow of air using anemometer.
12. To measure density of solution using electronic density meter and hydrometer
13. To measure moisture using moisturemeter.
14. To study various hardware to install all instrument and made coupling, connections etc using copper taking and complete a simple arrangement of given flow diagram.
15. To study various instrumentation symbols used and sraw all instrumentation flow diagram of a closed loop process control system.

NOTE: Out of 4 study type practical only 2 practicals should be performed and 10 practicals from other remaining practicals should be performed.

For detail syllabus of all other subjects of BE Instrumentation & Ctrl, effective from 2017 do visit Instrumentation & Ctrl 4th Sem BTEUP syllabus for 2017.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.