Process Control Instrumentation & Ctrl 6th Sem BTEUP Syllabus 2019-2020

Process Control detail BTEUP syllabus for Instrumentation And Ctrl, effective from 2019-2020, is collected from BTEUP 2017 Syllabus official website and presented for diploma students. PDF download is possible from official site but you can download the istudy mobile app for syllabus on mobile. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other bteup syllabus 6th sem instrumentation & ctrl 2019-2020 you can visit BTEUP Syllabus 6th Sem Instrumentation & Ctrl 2019-2020 Subjects. The detail syllabus for process control is as follows.

Rationale:

To keep output at predesired value some adjustment in process parameters is required during the plant operation. The control actions to the performed are mainly ON- OFF, proportional, integral and derivative . These control actions can be performed by pneumatic, electric, electronics, hydraulic or mechanical controllers . The controlled variable is finally fed to the final control elements. The students, familiar with different type of controllers, their installation and maintenance will be more suitable to the process industries.

Learning Outcomes:

After completion of the course, the students should be able to:

• Understand the basic principles & importance of process control in industrial process plants
• Specify the required instrumentation and final elements to ensure that well-tuned control is achieved
• Understand block diagrams & the mathematical basis for the design of control systems;
• To introduce the evaluation criteria and tuning techniques of controllers
• Understand working of PLC, design PLC based application by proper selection and sizing criteria
• Understand evolution and architecture of DCS,HMI, hierarchical control in DCS,HMI

1. INTRODUCTION:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

2. AUTOMATION CONTROL ACTIONS:

Types of control actions Two position control- ON-OFF action, Proportional, Proportional plus Derivation action, Proportional plus Integral, Proportional plus Integral plus Derivative action, Control scheme- feed forward.

3. FINAL CONTROL ELEMENT:

Introduction, Pneumatic Actuator, Hydraulic Actuator , Electric Actuator, Motor Actuator ,Control Valves . Types of Control Valves, Butterfly ,Globe,Gate, Ball valves, Solenoid valves, Installation and Maintenance of Control Valve , use of final control element.

4. PNEUMATIC AND HYDRAULIC CONTROLLER

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

5. ELECTRONIC CONTROLLER:

Op-amp as building block of Electronics controller , ON-OFF, P, PI, PD, PID Electronic Controller.

6. DIRECT DIGITAL CONTROL SYSTEM:

Introduction, DDC structure, DDC software basics , Advantage and Disadvantage of DDC

7. PROGAMMABLE LOGIC CONTROLLER (PLC) ,SCADA,HMI

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

8. DISTRIBUTED CONTROL SYSTEM (DCS):

Real time computer control system – A Concept , Functional Requirements of DCS, System Architecture, configuration , Working , Communication & Protocols, some popular DCS.

9. PREVENTIVE MAINTENANCE:

Objectives of preventive maintenance, elements of preventive maintenance, procedure of preventive maintenance schedules. Simple example of preventive programes and maintenance schedules .

10. VIRTUAL INSTRUMENTATION:

Concept of Data flow techniques , Basic of Data Acquisition and use of Analysis tools

List of Experiments:

1. To draw characteristic of
1. Quick opening control valve
2. Equal percentage control valve
3. Linear control valve
2. To draw the characteristic of valve
1. Without Positioner
2. With valve Positioner and compare it
3. To study the working of D/P transmitter and plot th I/O characteristic at different range of I/P span
4. To study the working of ON/OFF level controller and draw I/O characteristics.
5. To Draw characteristics of I/P and P/I converter.
6. To verify the logical Expression / Logic Gates using Ladder Logic on PLC Panal.
7. To write and perform simple program using Ladder Logic on PLC panel
8. To Perform Data Read and Write operation using HMI & PLC panel.
9. To study a distributed control system panel and do various experiment task on it.
10. To design a simple control diagram of SCADA software and link it to a given PLC and do various experiment or it.
11. Design a control loop of a typical process using LABVIEW and do various task using virtual instrumentation software
12. To fabricate and install a process instrumentation system.

Means of Assessment:

Assignments and quiz/class tests, mid-term and end-term written tests, model/prototype making Actual laboratory and practical work, model/prototype making, assembly and disassembly exercises and viva-voce

Text Books:

1. D.P Eckman, Automatic Process control 7th Edition, John Wiley New York 1990
2. Curtis D. Johnson Peocess Control Instrumentation Technology, 8th Edition, Pearson 2006
3. Coughanowr, D.R., Proces Systems Analysis and Control, McGraw-Hill International Edition,2004
4. Bela G Liptak Process Contro and Optamization., InstrumenrEngineers , Handbook volume2, CRC press and ISA, 2005
5. S. K. Singh Industrial Instrumentation and Control
6. Surekha Bhanot Process Control Prinviples& Applications

For detail syllabus of all other subjects of BE Instrumentation & Ctrl, effective from 2019-2020 do visit Instrumentation & Ctrl 6th Sem BTEUP syllabus for 2019-2020.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.