Modern Consumers Electronics Appliances Microelectronics 6th Sem BTEUP Syllabus 2019-2020

Modern Consumers Electronics Appliances detail syllabus for Electronics Engineering (Microelectronics), effective from 2019-2020, is collected from BTEUP 2017 Syllabus official website and presented for diploma students. PDF download is possible from official site but you can download the istudy mobile app for syllabus on mobile. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below.

For all other bteup syllabus 6th sem microelectronics 2019-2020 you can visit BTEUP Syllabus 6th Sem Microelectronics 2019-2020 Subjects. For all other elective subjects do refer to Electives. The detail syllabus for modern consumers electronics appliances is as follows.

Rationale:

This subject includes an exposure to train the indivusals for diagnose of fault and trouble shooting also installation. In modern consumers electronics appliances industry, job opportunities are available in the area of assembly, production, installation, repair and maintenance of modern consumers electronics appliances. The knowledge consumers electronics appliances allows opportunities with consumers electronics appliances with vast opportunities in the private sector.

Learning Outcomes:

After completion of the course, the students should be able to:

• identify and demonstrate operating principles and typical applications of tubes and diodes.
• Basic Ability to understand basic modern communication equipments and its application
• To understand Basic knowledge of Microwave Principle and its application
• Describe various type of Electronic Control system
• To understand various standards used in communication system
• Describe various safety standards use in consumers electronics appliances
• Ability to understand basic knowledge of surface mount components
• Understand the principal and application of home appliances.

1. MODERN COMMUNICATION EQUIPMENTS: ( Periods)

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

2. MICRO-WAVE PRINCIPLES &APPLICATION :

1. Sources of Micro-wave like KLYSTRON, MAGNETRON etc.
2. Operation of Domestic Micro-wave oven.
3. Electronic Regulator, Electronic Ballast, Electronic Iron.

3. ELECTRONIC CONTROLS:

1. Scope of Electronics controls
1. Temperature Control
2. Speed Control
3. Automatic Cycle Control
4. Trip at faults
5. Pressure/Vaccumecontrol
2. Electronics controls employed in Domestic Appliances.
1. Food Processor
2. Washing Machine
3. Home Automation
4. Electronic Locker
5. Home Security System
6. Digital Clock etc
3. Programming of Equipments

4. PRINCIPLES OF ELECTRO-OPTICAL EQUIPMENTS :

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

5. TESTING PROCEDURE AS PER STANDARD :

1. Need for standards.
2. Standardsorganisation—such as Bureau of Indian Standards (BIS),

International Standards Organisation (ISO).

3. Concept of Reliability.
4. Study of Radio and T.V. & Mobile Phone Standards
5. Frequency Allocation. Allocation of frequency for various uses like radio, T.V. cellulersystem, pager, CB-Radio, HAM- Radio. Military and Police communication etc.
6. Testing procedure as per standards for Radio / T.V& Mobile Phones.

6. Safety and Anaesthetics of Consumers Electronics Appliances.

Safety and Anaesthetics of Consumers Electronics Appliances

7. Introduction of surface mount components

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

List of Experiments:

1. To study and test the various parameters such as RF power output, spurious and harmonics, audio distortion and audio response of a Cordless Phone Transmitter.
2. To study and test the various parameter such as sensitivity, selectivity, spurious response and audio response of a Cordless Phone Receiver.
3. Familarisationwith the physical layout, location of stages, major components, measurement of DC voltages and tracing of signal in Cordless Phone. The students should be required to identify components from circuit diagram with physical layout of corresponding parts.
4. To study the working principal of BTS (Base Transreceiver Station) of a Cellular Phone.
5. To study the working principal of MSC (Mobile Switching Centres) of a Cellular Phone.
6. To study and test the various parameters of Smart Phone and Tablet PC
7. To study and test the various parameters such as gain, noise, bandwidth and voltages at different points of a microwave amplifier i.e. travelling wave tube
8. Identification of different microwave components such as transistor, diodes, along with the testing of various parameters such as frequency, capacitance.
9. To measure the power gain and beam width of a microwave dish antenna.
10. Familarisation with physical layout, location of stages, major components, measurement of dc voltages and tracing of signal in a food processor/washing machine
11. Fault finding in each stages of food processor/washing machine.
12. Familarisation with different controls – temperature, speed, tripping, pressure etc. and effects of adjustment of controls in the performance of domestic appliances such as Oven, Electronic Regulator etc.
13. To design and test the various parameters such as audio distortion, audio response, hum and noise, harmonics selectivity, sensitivity of a CD Player.
14. To design and test the various parameters and fault finding of each stages in a remote control of T.V.
15. Familarisation with all mannual and automatic controls and effect of adjustment of different controls in a Xerox Machine.
16. Familarisation with the basic maintenance such as clearing of paper path, cleaning the document glass and the SADH Belt, adding toner and replacing the toner waste bottle in a Xerox Machine.
17. Fault finding and correction of each stages of LED/LCD T.V. Receiver.
18. Fault detection and correction of each stages of Radio Receiver.

NOTE

Visit to the appropriate sites of Modern Consumer Electronic Service center’s should be made to understand their working. A comprehensive report must be prepared by all the students on these visits, especially indicating the dates and locations of their visits.

Instructional Strategy:

Modern Consumer Electronic Appliances is very important subject and requires both theoretical as well as practical exposure. The teaching should be supplemented by visits to the Modern Consumer Electronic Service center’s and using suitable audio visual aids.

Means of Assessment:

1. Assignments and quiz/class tests, mid-term and end-term written tests, model/prototype making
2. Actual laboratory and practical work, model/prototype making, assembly and disassembly exercises and viva-voce

RECOMMENDED BOOKS

1. Handbook of Repair and Maintenance – BPB Publication
2. Trouble & Repairing Major Appliances -Eric Klienert.
3. Information Appliances and beyond – Eric Bergman
4. Troubleshooting and Repairing Consumers Electronics-Homer L. Davidson
5. e-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR, Chandigarh.
6. Consumers Electronics – S.P.Bali

For detail syllabus of all other subjects of BE Microelectronics, 2019-2020 scheme do visit Microelectronics 6 syllabus for 2019-2020 Scheme.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.