Microprocessors Development System Industrial Control 6th Sem BTEUP Syllabus 2019-2020

Microprocessors Development System detail BTEUP syllabus for Electrical Engineering (Industrial Control), effective from 2019-2020, is collected from BTEUP 2017 Syllabus official website and presented for diploma students. PDF download is possible from official site but you can download the istudy mobile app for syllabus on mobile. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other bteup syllabus 6th sem industrial control 2019-2020 you can visit BTEUP Syllabus 6th Sem Industrial Control 2019-2020 Subjects. The detail syllabus for microprocessors development system is as follows.

Rationale:

Microprocessor has brought a revolution in the electronic field. Miniaturization and reliability are two major factors which have made electronic appliances versatile. Computers, pocket calculators and precision instrumentation could become possible and popular only due to microprocessor. A student equipped with the basic knowledge of different types of microprocessors and their variety of applications willproved useful to the industry and he can also responded to entrepreneurial activities.

Learning Outcomes:

After undergoing this course , the students will be able to :

• Know about basic Structure of 8085
• Understand various input output operating , Interrupts DMA of 8085
• Understand various A/D & D/A Converters, PPI chip
• Explain Microprocessor Based application in Data Acquisition system and Protective relays
• Can measure electrical quantity using Microprocessor
• Understand other Microprocessor and Microcontroller
• Test and Debugging of Microprocessor Based system

1. INTRODUCTION TO MICROPROCESSOR BASED SYSTEMS :(05 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

2. STRUCTURE OF 8085 MICROPROCESSOR: (14 Periods)

1. Registers.
2. Address/Data bus.
3. Control bus.
4. Interrupts.
2. Time multiplexing of address/data bus.
3. Concept of stack.
1. LIFO structure.
2. Safe for saving required data.
3. Role in calling subroutine.
4. Timing diagram.
1. Memory cycles.
2. Opcode fetch.
3. Memory read cycle.
4. Memory write cycle.
5. I/O read/write cycle.

3. I/O OPERATING (8085 MICROPROCESSER): (14 Periods)

1. Programmmed I/O
1. Using I/O port on IC chips.
2. Programming the ports on IC chips.
3. No hand shaking in data transfer.
2. Software interrupts.
1. Restart interrupts.
2. Vectored interrrupts.
3. Use of software interrupts.
3. Interrupts.
1. Interrupts levels.
2. Interrupt circuits.
3. Interrupt instructions.
4. Extending interrupt system.
4. Serial input/output.
1. RIM and SIM instructions.
2. How to transmit parallel data serially out.
5. Direct memory access scheme.
1. Need for DMA.
2. Application of DMA transfer.
3. Hardware logic used for DMA.
4. Brief idea about DMA controller chips.

4. I/O DEVICES: (14 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

5. MICROPROCESSOR APPLICATION : (14 Periods)

1. Microprocessor based Data Acquisition system.
1. Analog to Digital converters (0800,0808,0809) interfacing
2. Digital to Analog converters (0800,0808) interfacing
3. Seven segment display FND 500, 503, MAN 72
4. Display of alphanumeric characters.
2. Microprocessor based protective relays :
1. Over Current
2. Impedance
3. Directional
4. MHO relay
3. Measurement of electrical quantities using microprocessor :
1. Voltage
2. Current
3. Frequency
4. Phase Angle
5. Power Factor
6. Reactance
7. KVA
8. KVAR
9. KWH
4. Measurement based control of firing circuit of thyristor.
1. Temperature
2. Strain
3. Deflection
4. Speed
5. Mecroprocessor based control of firing circuit of thyristor.

6. OTHER MICROPROCESSOR AND MICROCONTROLLER :(10 Periods)

1. Comparison of 8085 with Z_80 and 8088, 68000 in terms of
1. Bus structure.
2. Architecture.
3. Interrupts.
4. Speeds.
5. Memory Addressing
2. Single chip Micro Computer : 8748,8051,8096 and 8044

7. MICROPROCESSOR SYSTEMS : (07 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

8. TESTING AND DIBUGGING THE MICROPROCESSOR BASED SYSTEMS : (06 Periods)

1. Tools for hard ware checks.
2. In circuit emulators.
3. Common faults and rectification (use of debugger)

List of Experiments:

1. Assembly language programming :- Programming of simple problems.
2. Simple programming problems using 8085,8086 microprocessor. rainer kit to gain competence in the use of
1. 8085 Instruction set.
2. Support chips or 8085.
3. Interfacing ADC/DAC chips IS 8085
4. Interfacing of Display Devices (Seven Segments)

Instructional Strategy:

The digital systems in microprocessors have significant importance in the area of electronics. Adequate competency needs to be developed by giving sufficient practical knowledge in microprocessors (programming as well as interfacing). Help may be taken in the form of charts, simulation packages to develop clear concepts of the subject. Programming exercises other than the given in the list may be given to the students.

Means of Assessment:

1. Assignments and quiz/class tests
2. Mid-term and end-term written tests
3. Actual laboratory and practical work, exercises
4. Viva-voce

Text Books:

1. Microprocessor Architecture, Programming and Applications with 8080/8085 by Ramesh S Gaonker, Willey Eastern Ltd. New Delhi
2. Microprocessor and Applications by Badri Ram: Tata McGraw Hill Education Pvt Ltd , New Delhi
3. Microprocessor programming & applications.by sudhir Goyal, North Publication.
4. Microprocessor and interfacing by Douglas.V.Hall, McGraw Hill Higher Education, New Delhi.
5. E-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR, Chandigarh.

Reference Books:

http://swayam.gov.in

For detail syllabus of all other subjects of BE Industrial Control, effective from 2019-2020 do visit Industrial Control 6th Sem BTEUP syllabus for 2019-2020.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.