General Workshop Practice – II Instrumentation & Ctrl 2nd Sem BTEUP Syllabus 2019-2020

General Workshop Practice – II detail BTEUP syllabus for Instrumentation And Ctrl, effective from 2019-2020, is collected from BTEUP 2017 Syllabus official website and presented for diploma students. PDF download is possible from official site but you can download the istudy mobile app for syllabus on mobile. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other bteup syllabus 2nd sem instrumentation & ctrl 2019-2020 you can visit BTEUP Syllabus 2nd Sem Instrumentation & Ctrl 2019-2020 Subjects. The detail syllabus for general workshop practice – ii is as follows.

Rationale:

In order to have a balanced overall development of diploma engineers, it is necessary to integrate theory with practice. General workshop practices are included in the curriculum in order to provide hands-on experience about use of different tools and basic manufacturing practices. This subject aims at developing general manual and machining skills in the students. In addition, the development of dignity of labour, safety at work place, team working and development of right attitude are the other objectives.

Learning Outcomes:

After completing the course, the students will be able to:

• Identify tools and equipment used and their respective functions.
• Identify different types of materials and their basic properties.
• Use and take measurements with the help of basic measuring tools/equipment.
• Select proper tools for a particular operation.
• Select materials, tools, and sequence of operations to make a job as per given specification/drawing.
• Prepare simple jobs independently and inspect the same.
• Follow safety procedures and precautionary measures.
• Use safety equipment and Personal Protection Equipment.

Note: The students are supposed to come in proper workshop dress prescribed by the institute. Wearing shoes in the workshops is compulsory. Importance of safety and cleanliness, safety measures and upkeep of tools, equipment and environment in each of the following shops should be explained and practiced. The students should prepare sketches of various tools/jobs in their practical notebook.

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

1. CARPENTRY SHOP

1. General Shop Talk
1. Name and use of raw materials used in carpentry shop : wood & alternative materials
2. Names, uses, care and maintenance of hand tools such as different types of Saws, C-Clamp, Chisels, Mallets, Carpenter’s vices, Marking gauges, Try-squares, Rulers and other commonly used tools and materials used in carpentry shop by segregating as cutting tools, supporting tools, holding tools , measuring tools etc.
3. Specification of tools used in carpentry shop.
4. Different types of Timbers, their properties, uses & defects.
5. Seasoning of wood.
2. Practice
1. Practices for Basic Carpentry Work
2. Sawing practice using different types of saws
3. Assembling jack plane Planning practice including sharpening of jack plane cutter
4. Chiselling practice using different types of chisels including sharpening of chisel
5. Making of different types of wooden pin and fixing methods. Marking measuring and inspection of jobs.
3. Job Practice
1. Job I Marking, sawing, planning and chiselling and their practice
2. Job II Half Lap Joint (cross, L or T – any one)
3. Job III Mortise and Tenon joint (T-Joint)
4. Job IV Dove tail Joint (Lap or Bridle Joint)
4. Demonstration of job showing use of Rip Saw, Bow saw and Tenon saw, method of sharpening various saws.

2. PAINTING AND POLISHING SHOP

1. Introduction of paints, varnishes, Reason for surface preparation, Advantages of Painting, other method of surface coating ie. Electroplating etc.
2. Job Practice
1. Job I: To prepare a wooden surface for painting apply primer on one side and to paint the same side. To prepare french polish for wooden surface and polish the other side.
2. Job II: To prepare metal surface for painting, apply primer and paint the same.
3. Job III: To prepare a metal surface for spray painting, first spray primer and paint the same by spray painting gun and compressor system.

The sequence of polishing will be as follows:

1. Abrasive cutting by leather wheel
2. Polishing with hard cotton wheel and with polishing material
3. Buffing with cotton wheel or buff wheel.

3. ELECTROPLATING SHOP

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

4. COMPUTER SHOP

1. Keyboard
1. Types of Keyboards
2. Interfacing (PS2, USB port, DIN connector)
3. Working
2. Mouse
1. Types of Mouse
2. Interfacing (serial, PS2, USB)
3. Working
3. Printers
1. Types (Dot matrix, Inkjet, Laserjet)
2. Interfacing (parallel port, USB port, Networking)
3. Working
4. Maintenance (cartridge change etc)
5. Installation of printers
6. Troubleshooting (Driver compatibility, Paper jam, printing problems due to uncleaned drum in laserjet printers, belt related problems in inkjet printer, jets choking problem in inkjet printer, color alignment problem).
7. Tracing network printer and sharing it.
4. Scanner
1. Types
2. Interfacing
3. Scanning a document
5. Monitor
1. Types and Interfacing
2. Fault finding and repairing
6. CPU
1. Motherboard connection (dimensions, processor, chipset, BIOS, EFI (Extended Firmware Interfacing), UFI (Unified Firmware Interfacing).
2. SMPS-AT
3. Working
4. Voltage levels

Means of Assessment:

1. Workshop jobs
2. Report writing, presentation and viva voce

Text Books:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

For detail syllabus of all other subjects of BE Instrumentation & Ctrl, effective from 2019-2020 do visit Instrumentation & Ctrl 2nd Sem BTEUP syllabus for 2019-2020.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.