Engineering Drawing-I detail BTEUP syllabus for Mechanical Engineering, effective from 2019-2020, is collected from BTEUP 2017 Syllabus official website and presented for diploma students. PDF download is possible from official site but you can download the istudy mobile app for syllabus on mobile. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.
For all other bteup syllabus 1st sem mechanical 2019-2020 you can visit BTEUP Syllabus 1st Sem Mechanical 2019-2020 Subjects. The detail syllabus for engineering drawing-i is as follows.
Rationale:
Drawing is the language of engineers and technicians. Reading and interpreting engineering drawing is their day to day responsibility. The subject is aimed at developing basic graphic skills in the students so as to enable them to use these skills in preparation of engineering drawings, their reading and interpretation. The emphasis, while imparting instructions, should be to develop conceptual skills in the students following BIS SP 46 – 1988.
Note:
i. First angle projection is to be followed
ii. Minimum of 18 sheets to be prepared and atleast 2 sheets on AutoCAD
iii. Instructions relevant to various drawings may be given along with appropriate demonstrations, before assigning drawing practice to students
Learning Outcomes:
After undergoing the subject, the students will be able to:
- Identify and use of different grades of pencils and other drafting instruments which are used in engineering field
- Draw free hand sketches of various kinds of objects.
- Utilize various types of lines used in engineering drawing.
- Read and apply different dimensioning methods on drawing of objects.
- Use different types of scales and their utilization in reading and reproducing drawings of objects and maps.
- Draw 2 – dimensional view of different objects viewed from different angles (orthographic views)
- Draw and interpret complete inner hidden details of an object which are otherwise not visible in normal view
- To make projections of Solid
- Generate isometric (3D) drawing from different 2D (orthographic) views/sketches
- Identify conventions for different engineering materials, symbols, sections of regular objects and general fittings used in Civil and Electrical household appliances
- Use basic commands of AutoCAD.
1. Introduction to Engineering Drawing (03 sheets)
For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.
2. Dimensioning Technique (01 sheet)
- Necessity of dimensioning, method and principles of dimensioning (mainly theoretical instructions)
- Dimensioning of overall sizes, circles, threaded holes, chamfered surfaces, angles, tapered surfaces, holes, equally spaced on P.C.D., counter sunk holes, counter bored holes, cylindrical parts, narrow spaces and gaps, radii, curves and arches
3. Scales (02 sheets)
- Scales -their needs and importance (theoretical instructions), type of scales, definition of R.F. and length of scale
- Drawing of plain and diagonal scales
4. Orthographic Projections (06 sheets)
For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.
5. Projection of Solid (02 sheets)
- Definition and salient features of Solid
- Types of Solid (Polyhedron and Solid of revolution)
- To make projections, sources, Top view, Front view and Side view of various types of Solid.
6. Sections (02 sheets)
- Importance and salient features
- Drawing of full section, half section, partial or broken out sections, Offset sections, revolved sections and removed sections.
- Convention sectional representation of various materials, conventional breaks for shafts, pipes, rectangular, square, angle, channel, rolled sections
- Orthographic sectional views of different objects.
7. Isometric Views (02 sheets)
For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.
8. Common Symbols and Conventions used in Engineering (02 sheets)
- Civil Engineering sanitary fitting symbols
- Electrical fitting symbols for domestic interior installations
*9. Introduction to AutoCAD (02 sheets)
Basic introduction and operational instructions of various commands in AutoCAD. At least two sheets on AutoCAD of cube, cuboid, cone, pyramid, truncated cone and pyramid, sphere and combination of above solids.
- Auto CAD drawing will be evaluated internally by sessional marks and not by final theory paper.
Instructional Strategy:
Teacher should show model of realia of the component/part whose drawing is to be made. Emphasis should be given on cleanliness, dimensioning and layout of sheet. Focus should be on proper selection of drawing instruments and their proper use. The institute should procure AutoCAD or other engineering graphics software for practice in engineering drawings. Teachers should undergo training in AutoCAD/Engineering Graphic. Separate labs for practice on AutoCAD should be established.
Means of Assessment:
- Sketches
- Drawing
- Use of software
Text Books:
- A Text Book of Engineering Drawing by Surjit Singh; Dhanpat Rai & Co., Delhi
- Engineering Drawing by PS Gill; SK Kataria& Sons, New Delhi
- Elementary Engineering Drawing in First Angle Projection by ND Bhatt; Charotar Publishing House Pvt. Ltd., Anand
- Engineering Drawing I & II by JS Layall; Eagle Parkashan, Jalandhar
- Engineering Drawing I by DK Goel, GBD Publication.
For detail syllabus of all other subjects of BE Mechanical, effective from 2019-2020 do visit Mechanical 1st Sem BTEUP syllabus for 2019-2020.
Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.