6th Sem, Civil Diploma

Design of Steel Structure Civil 6th Sem BTEUP Syllabus 2019-2020

Design of Steel Structure detail BTEUP syllabus for Civil Engineering, effective from 2019-2020, is collected from BTEUP 2017 Syllabus official website and presented for diploma students. PDF download is possible from official site but you can download the istudy mobile app for syllabus on mobile. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other bteup syllabus 6th sem civil 2019-2020 you can visit BTEUP Syllabus 6th Sem Civil 2019-2020 Subjects. The detail syllabus for design of steel structure is as follows.

Rationale:

This subject is an applied engineering subject. Diploma holders in Civil Engineering will be required to supervise steel construction and fabrication. He may also be required to design simple structural elements, make changes in design depending upon availability of materials. This subject thus deals with elementary design principles as per BIS code of practice IS: 800.

Learning Outcomes:

After undergoing the subject, students will be able to:

  • Explain structural properties of steel and its designation as per Indian Standards
  • Select different types of bolted and welded joints
  • Analyze and design single and double angle section struts and I section compression members
  • Explain different types of trusses, their different components and usability
  • Analyze and design of simply supported steel beams
  • Select various types of plate girders
  • Supervise fabrication and erection of steel structure like trusses, columns and girders

Detailed Content:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

1. Structural Steel and Sections: (06 Periods)

  1. Properties of structural steel
  2. Designation and classification of structural steel sections as per IS handbook and IS: 800: 2007
  3. Tubular Sections

2. Riveted Connections (10 Periods)

Types of Rivet, Permissible stresses in rivets, types of riveted joints, specifications as per IS800, Failure of riveted joint, strength and efficiency of riveted joint, Design of Riveted Connection only axially loaded number (No staggered rivetting)

3. Bolt Connections: (10 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

4. Welded connections: (10 Periods)

Types of welds and welded joints, advantages and disadvantages of welded joints design of fillet and butt weld for axially loaded members

5. Tension Members (10 Periods)

Analysis and design of single and double section tension members and their rivetted and welded connections with gusset plate as per IS:800-2007. Introduction to Lug Angle and Tension splice.

6. Compression Members (10 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

7. Roof Trusses (08 Periods)

Form of trusses, pitch of roof truss, spacing of trusses, spacing of purlins, connection between purlin and roof covering. Connection between purlin and principal rafter (no design, only concept)

8. Column Bases (08 Periods)

Types of column bases i.e. slab base, gusseted base. Design of slais base and concrete block. Introduction to gusseted base (no numerical problems on gusseted base). Introduction to beam columns design of simple built up beams (Symmetrical I section with cover plates only)

9. Beams (08 Periods)

Analysis and design of single section simply supported laterally restrained steel beams. Introduction to plate girder and functions of various elements of a plate girder

10. Fabrication and erection of steel structures like trusses, columns and girders (04 Periods)

Fabrication and erection of steel structures like trusses, columns and girders

Important Note:

Use of IS: 800 and Steel Tables are permitted in examination.

Instructional Strategy:

Teachers are expected to give simple problems for designing various steel structural members. For creating comprehension of the subject, teachers may prepare tutorial sheets, which may be given to the students for solving. It would be advantageous if students are
taken at construction site to show fabrication and erection of steel structures. IS:800 may be referred along with code for relevant clauses

Means of Assessment:

  1. Assignments and quiz/class tests
  2. Mid-term and end-term written tests’
  3. Model Making
  4. Viva-voce

RECOMMENDED BOOKS

  1. Design of Steel Structures by Duggal SK; Standard Publishers, Delhi
  2. Steel Structures Design and Drawing by BirinderSingh; Kaption Publishing House, Ludhiana
  3. Design of Steel Structures by Ram Chandra; Standard Publishers,Delhi
  4. Design of Steel Structures by S Ramamurthan
  5. e-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR, Chandigarh.

Websites for Reference:

http://swayam. gov.in

For detail syllabus of all other subjects of BE Civil, effective from 2019-2020 do visit Civil 6th Sem BTEUP syllabus for 2019-2020.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.

Leave a Reply

Your email address will not be published. Required fields are marked *

*