Construction Management, Accounts & Entrepreneurship Development Civil 6th Sem Syllabus for Diploma BTEUP 2017

Construction Management, Accounts & Entrepreneurship Development detail BTEUP Diploma syllabus for Civil Engineering, effective from 2017 is collected from BTEUP 2017 Syllabus official website and presented for diploma students. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other civil 6th sem bteup diploma syllabus 2017 you can visit Civil 6th Sem BTEUP Diploma Syllabus 2017 Subjects. The detail syllabus for construction management, accounts & entrepreneurship development is as follows.

Rationale:

Construction management is an applied engineering subject. Knowledge of this subject will help the civil engineering technician in planning, execution repair of works, maintain stores, prepare accounts of men and materials engaged on the works and maintain accounts of all departmental jobs.
It has been experienced that all students who pass out diploma do not go for jobs. Students who posses entrepreneurial traits and attributes prefer setting up their own contractorship firms/industrial or business ventures instead of seeking jobs. So the percentage of students who like to set up their own industrial/business venture could be increased by introducing entrepreneurship development in civil engineering curriculum.
The contents of this subject has been developed to cater the above needs.

SECTION A

CONSTRUCTION MANAGEMENT

1. Introduction:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

2. Construction Planning:

1. Stages at which planning is done. Pre tender and contract planning by the contractor.
2. Scheduling:Definition, Methods of scheduling: bar charts and CPM,advantages of scheduling. No problem on CPM to be set in the examination.
3. Planning and scheduling of construction jobs by bar charts.
4. Preparation of construction schedule, labour schedule,material schedule, and equipment schedule.
5. Limitations of bar charts.
6. Cost-time balancing.

3. Organisation:

1. Types of organisation: Line,staff,fucntional and their characteristics.
2. Principles of organisation; (only menaings of the following and their sgnificance);Span of control ; Delegation of authority and responsibility ; Ultimate authority and responsibility;Unity of command;contact;unity of assignment; job definition; increasing organisation relationship.
3. Motivation and human relationship concept,

4. Site Organisation:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

5. Constrcution Labour

1. Conditions of construction workers in India, wages paid to workers.
2. Trade unions connected with construction industry and trade Union Act.
3. Labour welfare.
4. Payment of wages Act.Minimum wages Act.
5. Workmen compensation Act.
6. Contract Labour Act.

6. Control of Progress:

1. Methods of recording progress.
2. Analysis of progress.
3. Taking corrective actions keeping head of office informed.

7. Inspection and Quality Control

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

8. Accidents and Safety in Construction:

1. Accidents – causes.
2. Safety measures for:
1. Excavation work
2. Drilling and blasting.
3. Hot bituminous works.
4. Scaffolding, ladders, form work.
5. Demolitions.
3. Safety campaign.

9. Professional Practice

SECTION B

ACCOUNTS

10. Introduction:

1. Necessity of account.
2. List of reference book on accounts
1. Civil Services Rules, Vol,I,Ii and
2. PWD Accounts codes.
3. Manual of orders.
4. Departmental financial rules.
5. State Treasury rules.

11. Organisation

1. Establishments in the PWD.
2. Regular establishment:
1. Permanent establishment.
2. Temporary establishment.
3. Work charged establishment.
4. Contingency establishment.

12. Outline of P.W.D. System of Accouts:

1. Necessity of a system of accounts.
2. P.W.D. system of accounts.
3. Classification of transactions:
1. Necessity of maintaining the accounts by Head of Accounts:
2. Heads of Account:

– Major Heads.
– Minor Heads.
– Detailed Heads.
(Detailed Heads of Accounts not to be memorised).

13. Cash

1. Definition of cash.
2. Precautions in custody of cash.
3. Teasury challan-procedure to fill the prescribed form.
4. Imprest account and temporary advance.
5. Definition of imprest and rules for maintaining

imprest account.Actual filling
of the prescribed form.

6. Defifnition of temporary advance; Its difference from the imprest account ; maintenance of temporary advance account.

14. Stores:

1. What are stores, their necessity and safe

custody.

2. Classification of Stores:
1. Stores debitable to suspense heads-stock.
2. Stores debitable to final heads:

Tools and plant.
Road metal
Material charged direct to works.

3. Stock
1. Kind of articles in stock;
2. Sources of stock receipt;

Suppliers.
Other departments, divisions and subdivisions.
Manufacturers.
Works

3. Sub heads of stock.
4. Quantity accounts of stock.

Rules for preparing indent and invoices; preparation of indent in proper form.
Register of stock receipts and issues, procedure for recording entries in proper form. Actual filling of the form.

5. Return of monthly transaction of stock and half yearly return of stock.
6. Stock taking of stores-general rules.
7. Surpluses and shortages of stock-action for rectification of mistakes in stock accounts.
8. Losses of stock-reporting the loss,estimates for loss of stock and writing off.
4. Tools and Plants (T&P)
1. Meaning.
2. Classification of T&P

– Register of T&P receipts and issues-Rules for actual filling of the prescribed form.
– Statement of receipts and issues of T&P in prescribed form.

3. Sources of recipt of T&P
4. Authority of issue of T&P.
5. Surpluses and shortage of T&P-reconcilation of accounts.
6. Points of difference in accounts of stock and T&P.
7. Disposal of unserviceable articles of T&P. Preparation of survey report in prescribed form.
5. Road Metal:
1. Meaning.
2. Rules for maintaining road metal returns-filling up the prescribed form.
3. Method of checking.
4. Shortages and surpluses.
6. Materials charged direct to works:-Necessity, circumstance under which materials are directly charged to work.
1. Material at site Accounts (M.A.S), Rules for actual filling of prescribed form i.e.

– Detailed statement of materials compared with estimated requirements and
– Report of the value and verification of unused materials.

2. Disposal of surplus materials at the work site.
3. Definition of:

– Issue rate.
– Storage rate.
– Storage charges.
– Supervision charges
– Assets and liabilities.

7. Issue of materials to contractors.

15. Works:

1. Categories:
1. Original works.
2. Repair works.
2. Classifcation of works according to cost
1. Major works.
2. Minor works.
3. Petty works.
3. Conditions to be fulfilled before a work can be taken in hand:
1. Administrative approval.
2. Technical sanction.
3. Appropriation of funds.
4. Expenditure sanction (for plan works)
4. Methods of carrying out works:
1. Departmentally through daily labour
2. Through contractors

– Piece work system – work order
– Contract system – Agreement.

5. Different types of contract:
1. Item rate contract.

– Labour rate (%age above or below)for various items or for covered areas construction (Private construction only)
– Through rate basis (%age above or below)

2. Lump-sum contract.
6. Allotment of works:
1. Concept of quotations and tenders
2. Work order – Rules and Form.
7. Definition of works. deposit works and Taccavi

16. Payment for Works:

1. Daily labour:
1. Meaning.
2. Muster roll. Rules. Instruction for Three parts of maintenance. M.R. – Nominal roll, unpaid wages,detail of work done and filling of prescribed form.
3. Daily labour report, filling of prescribed form.
4. Casual labour-Rolls Its difference from M.R.
5. Mistakes of common occurance.
2. Payment of work charged establishment-preparation of pay bill on prescribed form.
3. Payment to contractors and suppliers
1. Record of measurement. Measurement book (M.B.) General Instructions. Method of payment after recorded in M.B. Common mistakes in the use M.B. Studnet may be directed to record the measurement of different item such as W/w, Distemper, Painting, Glass fitting, Plastering, etc. for maintenance of a building.
2. Check measurement Book (C.M.B.)

Purpose, administration with regard to its maintenance.

3. Standard measurement book (SMB)

Purpose and instruction with regard to its maintenance.

4. Different types of payment
1. First and final payment.
2. Running payment.

Secured advance. On account payment.
Advance payment.
Running and final payment.

5. Hand receipt
6. Clause in which the detailed measurments are dispensed with.

17. Miscellaneous

1. Duties of Junior Engineer/S.O. and S.D.O.
2. Instructions on transfer of charge.
3. Maintenance of log books of vehicles and machinery.
4. Manufacturers accounts and out turn of machinery.
5. Dealing with railways-booking of consignment, taking delivery,credit note, demurrage and wharfage charges and damaged consignment.

NOTE: Students will not be required to draw out and memorize the forms. They are expected to know only how to fill up the forms supplied for the purpose from the given data.

SECTION C

ENTREPRENEURSHIP DEVELOPMENT

18. Introduction:

Entrepreneur, entrepreneurship, its meaning & importance. Qualities of an entrepreneur. Entrepreneur Motivation Training.

19. Financing Agencies :

Financial agencies for land, infra structure, machinary, raw material, import of raw material and machinary. Role and function of Govt. department connected with the development of industries/business ventures in the State.

20. Industrial Legislation and taxes:

Industrial and labour laws, production tax, local tax, trade tax, exise duty and income tax.

21. Project Report:

Component of project report – Land, building, electricity, water, equipment and other utilities. Materials, its availability, cost, labour availability and wage rates. Project report preparation, provisional registration and plan of acquiring finance from proper source (financing agencies).

SECTION D

D. INTELLECTUAL PROPERTY RIGHTS :

Introduction to IPR (Patents, Copy Right, Trade Mark), Protection of undisclosed information, Concept and history of patents, Indian and International Patents Acts and Rules, Patentable and Nonpatentable invention including product versus Process.

For detail syllabus of all other subjects of BE Civil, effective from 2017 do visit Civil 6th Sem BTEUP syllabus for 2017.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.