For all other bteup syllabus 6th sem refrigeration & air conditioning 2019-2020 you can visit BTEUP Syllabus 6th Sem Refrigeration & Air Conditioning 2019-2020 Subjects. For all other elective subjects do refer to Electives. The detail syllabus for repair and maintenance – ii is as follows.

Rationale:

A diploma holder is involved in supervision and maintenance jobs. He must know the various processes carried out during testing, repair and maintenance and material handling. Hence this subject.

Learning Outcomes:

On completion of the course, the students will be able to:

• explain the concept of testing, repair and maintenance.
• comprehend the procedure for erection and commissioning of machines.
• comprehend the procedure for testing of machines.
• explain various lubrication systems.
• comprehend the procedure of repair and maintenance.

1. Introduction (06 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

2. Plant Layout, Erection and Commissioning of Machines (Installation) (10 Periods)

Location, layout of machines in Plant Layout, Principles of Plant layout, types of plant layout and positioning of machines, grouping of machines.
Foundation – types of foundation, various considerations for machine foundations, foundation plan, types of foundation bolts, erection and leveling, grouting
Vibration, damping, vibration isolation – methods of isolation, anti vibration mounts.

3. Testing of Machines (10 Periods)

Testing equipment – dial gauge, mandrel, spirit level, straight edge, auto collimator. Recalibration of measuring instruments like vernier calliper.
Testing methods – geometrical/alignment test, performance test, testing under load, run test, vibrations, noise

4. Maintenance (10 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

5. Repairing (08 Periods)

Common parts which are prone to failure, reasons of failure
Repair schedule Parts that commonly need repair such as belts, couplings, nuts, and bolts repairing the engines, compressors and boilers.

6. Lubrication Systems (09 Periods)

Lubrication methods and periodical lubrication chart for various machines (daily, weekly, monthly )
Handling and storage of lubricants
Lubricants conditioning and disposal
Lubricant and their grades needed for specific components such as gears, bearings, and chains
Purpose and procedure of changing oil periodically (like gear box oil)

7. Material Handling Systems (09 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

8. Maintenance Manuals and Reports (08 Periods)

Types of manuals need for maintenance contents of manuals, manual writing and reporting, action- taken report (ATR)
Fitter common tools: Appliances and devices, handling facilities and measuring instruments .

Instructional Strategy:

1. Lay greater emphasis on practical aspects of maintenance.
2. Make use of transparencies, video films and CD’s.
3. Expose the students to real life situation.
4. Promote continued learning through properly planned assignments.
5. Demonstrate sample of all types of gear and bearings.

Means of Assessment:

Assignments and quiz/class tests Mid-term and end-term written tests Model/prototype making

Text Books:

1. Industrial Maintenance by HP Garg; S. Chand and Company, Delhi.
2. Installation, Testing and Maintenance by JS Narang, Dhanpat Rai & Sons, New Delhi.
3. Plant Maintenance Engineering by RK Jain; Khanna Publishers, Delhi.
4. Installation, Servicing and Maintenance by SN Bhattacharya; S Chand and Company, Delhi.
5. Maintenance Engineering and Management by RC Mishra and K Pathak; Prentice Hall of India Pvt. Ltd., New Delhi.
6. E-books/e-tools/relevant software to be used as recommended by AICTE/UBTE/NITTTR, Chandigarh.

Reference Books:

http:// swayam. gov. in

For detail syllabus of all other subjects of BE Refrigeration & Air Conditioning, 2019-2020 scheme do visit Refrigeration & Air Conditioning 6 syllabus for 2019-2020 Scheme.

Dont forget to download iStudy Mobile App for latest syllabus and results, class timetable and more.

For all other subjects of the semester you can visit Refrigeration & Air Conditioning 5th Sem syllabus & notices. For all other Elective Refrigeration & Air Conditioning 5th Sem BTEUP Syllabus 2019-2020 subjects do refer to Elective Refrigeration & Air Conditioning 5th Sem BTEUP Syllabus 2019-2020. The detail syllabus for elective refrigeration & air conditioning 5th sem bteup syllabus 2019-2020 is as follows.

Dont forget to download iStudy Mobile App for latest syllabus and results, class timetable and more. Incase of questions dont hesitate to leave a comment or leave a feedback in iStudy app for faster response.

Wish you a great luck ahead.

For all other subjects of the semester you can visit Refrigeration & Air Conditioning 6th Sem syllabus & notices. For all other Elective Refrigeration & Air Conditioning 6th Sem BTEUP Syllabus 2019-2020 subjects do refer to Elective Refrigeration & Air Conditioning 6th Sem BTEUP Syllabus 2019-2020. The detail syllabus for elective refrigeration & air conditioning 6th sem bteup syllabus 2019-2020 is as follows.

Dont forget to download iStudy Mobile App for latest syllabus and results, class timetable and more. Incase of questions dont hesitate to leave a comment or leave a feedback in iStudy app for faster response.

Wish you a great luck ahead.

For all other bteup syllabus 6th sem refrigeration & air conditioning 2019-2020 you can visit BTEUP Syllabus 6th Sem Refrigeration & Air Conditioning 2019-2020 Subjects. For all other elective subjects do refer to Electives. The detail syllabus for computer aided design (for cad) is as follows.

Rationale:

Diploma holders in mechanical engineering with specialization in computer aided design are required to provideprofessional assistance in design of prototypes, tools jigsand fixtures. For this purpose, it is essential to impartknowledge and skills about computer aided graphics anddesign for enabling them to perform in this field.

Learning Outcomes:

After completion of this course, the students will be able to:

• List various CAD Hardware.
• Explain different types of Graphic Package.
• Explain the 2D and 3D transformation.
• Describe the world/device co-ordinate system.
• Explain the benefits of CAD.

1. CAD Hardware (18 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

2. Graphic Package (20 Periods)

Graphic Software, Selection of appropriate software. Ground rules for graphics package.Graphics package. CAD Software – Application of CAD Software.

3. 2-D & 3-D transformations (22 Periods)

World/Device Co-ordinate representations. 2D and 3D geometric transformation. Matrix representation – translation, scaling, rotation, mirror and share, Zooming,Panning and Clipping (for 2D only).

4. Design process and role of computers in design process. Benefits of CAD (10 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Means of Assessment:

• Assignments and quiz/class tests
• Mid-term and end-term written tests

Text Books:

1. Computer Aided Design by Sadhu Singh; S. K. Kataria& Sons
2. Computer Aided Design by Sunil Kumar Srivastava;IK International
3. CAD/CAM : Computer-Aided Design and Manufacturing by M. Groover, E. Zimmers; Pearson
4. E-books/e-tools/relevant software to be used as recommended by AICTE/UBTE/NITTTR, Chandigarh.

For detail syllabus of all other subjects of BE Refrigeration & Air Conditioning, 2019-2020 scheme do visit Refrigeration & Air Conditioning 6 syllabus for 2019-2020 Scheme.

Dont forget to download iStudy Mobile App for latest syllabus and results, class timetable and more.

For all other bteup syllabus 6th sem refrigeration & air conditioning 2019-2020 you can visit BTEUP Syllabus 6th Sem Refrigeration & Air Conditioning 2019-2020 Subjects. For all other elective subjects do refer to Electives. The detail syllabus for tool engineering (for production) is as follows.

Rationale:

A diploma holder should have complete knowledge of basic tools, their materials and their optimal utilization. This subject imparts skill and awareness of quality production in minimum time by using jigs and fixtures.

Learning Outcomes:

After completion of this course, the students will be able to :

• List various properties of cutting tools.
• Explain the geometry of cutting tools.
• Explain the principles of location.
• Describe the functions of various locating devices.
• Explain the working of various types of clamps.
• Explain the functioning of various types of drilling jigs.
• Discuss features of various types of fixtures

1. Cutting Tools (24 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

2. Location and Clamping (16 Periods)

Principles of location, 3-2-1 principle, Location with previous machined hole, different locating devices, V-location, conical locations. Purpose of Clamping elements, types of clamps.

3. Jigs and Fixtures (30 Periods)

Need for jigs and fixtures, fundamental principles of jigs and fixtures design.
Types of bushes, advantages of bushings.
Types of drilling jigs- template jig, channel jig, latch jig, quick acting jig, indexing jig, box jig.
Types of fixtures-simple fixture, milling fixture, welding fixture, turning fixture, assembly fixture & inspection fixture.

Means of Assessment:

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Text Books:

1. Production Engineering by P.C. Sharma; S. Chand & Company Ltd., Delhi.
2. Tool Design by Donaldson and Lecain; Tata McGraw Hill Company, New Delhi
3. Production Engineering & Design by Dr. Surender Kumar and Umesh Chandra
4. E-books/e-tools/relevant software to be used as recommended by AICTE/UBTE/NITTTR, Chandigarh.

Reference Books:

http://swayam. gov.in

For detail syllabus of all other subjects of BE Refrigeration & Air Conditioning, 2019-2020 scheme do visit Refrigeration & Air Conditioning 6 syllabus for 2019-2020 Scheme.

Dont forget to download iStudy Mobile App for latest syllabus and results, class timetable and more.

For all other bteup syllabus 6th sem refrigeration & air conditioning 2019-2020 you can visit BTEUP Syllabus 6th Sem Refrigeration & Air Conditioning 2019-2020 Subjects. For all other elective subjects do refer to Electives. The detail syllabus for refrigeration plant, erection and servicing (for rac) is as follows.

Rationale:

Refrigeration and Air Conditioning is one of the needs ofmodern society and industry. It is already recognised so asit is futile here to say anything about its importance orutility. The subject has been divided in three parts thiscovers service and maintenance of Refrigeration andAir Conditioning Plant.

Learning Outcomes:

After completion of this course, the students will be able to:

• Explain the installation of refrigeration and Air conditioner.
• Discuss various types of refrigeration plant layout.
• Explain operational and routine maintenance process.
• Describe trouble shooting in refrigeration plant.
• Discuss the maintenance of Air Conditioning plant equipment’s.

1. Installation of refrigeration and AC machine (10 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

2. Erecting of refrigeration plant (12 Periods)

Need based layout of refrigeration plant, Installation of different components of the refrigeration plant, Erecting ofthe plant, Erecting of duct and grills, Precaution ininstallation and erecting.

3. Operation and routine maintenance (12 Periods)

Operating procedures, Starting sequences andimportance/significance of each step, stopping sequence,Routine maintenance, Some routines service operations -Pumping down, Pumping out the refrigerant, refrigerantcharging, purging of non-condensable gases.

4. Preventive maintenance, service and trouble shooting (18 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

5. Maintenance, servicing and overhauling of refrigerationplants equipment’s (18 Periods)

Servicing and overhauling of compressor such as -Reciprocating, rotary, Centrifugal and hermateic sealedcompressor unit. Maintenance of receiver, Humidifier pump,Fan and filters, repair & maintenance of electricalmachines related to the trade (Electric motor Testing), Repair & maintenance of – system controls such as -Relay (Current and Potential) OLP, Thermostat, High and Lowpressure controls, Solenoid valve.

Means of Assessment:

• Assignments and quiz/class tests
• Mid-term and end-term written tests

Text Books:

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

For detail syllabus of all other subjects of BE Refrigeration & Air Conditioning, 2019-2020 scheme do visit Refrigeration & Air Conditioning 6 syllabus for 2019-2020 Scheme.

Dont forget to download iStudy Mobile App for latest syllabus and results, class timetable and more.

For all other bteup syllabus 5th sem refrigeration & air conditioning 2019-2020 you can visit BTEUP Syllabus 5th Sem Refrigeration & Air Conditioning 2019-2020 Subjects. For all other elective subjects do refer to Electives. The detail syllabus for air conditioning is as follows.

Rationale:

Refrigeration and Airconditioning is one of the needs ofmodern society and industry. It is already recognised so asit is futile here to say anything about its importance orutility. For mechanical engineers this knowledge is an extragem. Thispaper covers Air Conditioning.

Learning Outcomes:

After undergoing this course, the students will be able to:

• Explain Psychometric and its importance.
• Explain the working of air conditioning system.
• Carry out load calculation.
• Explain the air condition equipment.
• Carry out testing of air conditioning unit.

1. COMFORT AIRCONDITIONING (08 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

2. AIRCONDITIONING LOAD CALCULATIONS (16 Periods)

COLLING LOAD CALCULATIONS

Design conditions for cooling space, sensible heat gains inthe space:

1. Heat transmission load through buildingstructure in through wall door and windows, Roof and Floor,
2. Solar radiation heat lock
3. Infiltration heat load
4. Occupants heat load
5. Electric appliances heat load
6. Product cooling load above freezing and below freezing
7. Outside ventilation air load
8. Other internal heat sources.

Latent heat gain in the space:

1. Infiltration heat load
2. Occupants heat load
3. Product freezing load
4. Respiration load
5. Miscellaneous items for latent heat load.

HEATING LOAD CALCULATIONS

Sensible heat loss:

1. Heat Transmission loss throughbuilding structure
2. Infiltration heat loss
3. Productheat loss
4. Other materials heat loss.

Latent Heat loss:

1. Infiltration heat loss
2. Miscellaneous items forlatent heat loss. Auxiliary heat source, Net heating capacity, intermittentlyheat building.

3. AIR CONDITIONING SYSTEM (10 Periods)

1. Unit air-conditioning system (Window air conditioning system),Remote and split air conditioners.
2. Package air conditioning system
1. Package A.C. with water cooled condenser
2. Package A.C. with air cooled condenser
3. Central Air conditioning system
1. D.X system with air handling unit
2. Chilled and hot water system with fan coil unit.

4. AIR CONDITIONING EQUIPMENTS (12 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

5. EVAPORATOR COOLING (10 Periods)

Evaporator cooling – Thermodynamics of evaporative cooling, Types of evaporative coolers – Spray type, Pad type,Rotating type, Efficiency of evaporative cooling, Limitationof evaporative cooling, Indirector, Modified evaporativecooling system.

List of Experiments:

1. Study and use of different refrigeration tools and equipment’s.
2. Study of open type reciprocating compressor used in a refrigeration system.
3. To determine the capacity for window type air conditioner.
4. Proper method of setting and adjusting
1. Thermostate
2. low pressure and high pressure cutout
3. thermostateexpersion ball
5. Wiring of refrigerator, water cooler, desert cooler, room air conditioner, packed air conditioner, pannel board.
6. Study of a reciprocating Hermatically Sealed Compressor.
7. Study of electric controls such as – Over Lead Protector, Starting Relay, Potential Relay, thermostat, Solenoil Valve, Humidistat, High Pressure Control and Low Pressure Control.
8. Study of Refrigerator (Vapour compression and Vapour absorption type).
9. Study of water cooler and calculation of water cooling rate.
10. Study of different refrigerant flow controls.
11. To find out bypass factor of cooling coil, heating coil.
12. Study of desert cooler and find out its humidifying or cooling efficiency.
13. Study of air conditioning trainer and find out its C.O.P.

Instructional Strategy:

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Means of Assessment:

1. Assignments and quiz/class tests
2. Mid- Semester Examination
3. Group discussion
4. Semester Examination
5. Presentation

Text Books:

1. Refrigeration & Air Condition by S. C. Arora; TATA Mc Graw Hill, Delhi.
2. Refrigeration & Air Condition by P. L. Balloney; Khanna Publishers.
3. A Textbook of Refrigeration & Air Conditioning by R. S. Khurmi and J. K. Gupta; S. Chand.
4. Air Conditioning Engineering by W. P. Jones; A Butterworth-heinemann Title.
5. E-books/e-tools/relevant software to be used as recommended by AICTE/UBTE/NITTTR, Chandigarh.

For detail syllabus of all other subjects of BE Refrigeration & Air Conditioning, 2019-2020 scheme do visit Refrigeration & Air Conditioning 5 syllabus for 2019-2020 Scheme.

Dont forget to download iStudy Mobile App for latest syllabus and results, class timetable and more.

For all other bteup syllabus 5th sem refrigeration & air conditioning 2019-2020 you can visit BTEUP Syllabus 5th Sem Refrigeration & Air Conditioning 2019-2020 Subjects. For all other elective subjects do refer to Electives. The detail syllabus for repair and maintenance – i is as follows.

Rationale:

Mechanical engineer is need of every industry and inmajority of cases he is made responsible for day to dayrepair and maintenance of parts and over all up keep of theplant for its smooth running. This paper aims to furnish themwith certain basic considerations related to their work andresponsibility. This subject aims at developing required knowledge and skills in this area.

Learning Outcomes:

After undergoing this course, the students will be able to:

• Explain the concept of predictive maintenance,corrective maintenance and preventive maintenance
• Explain the stages of maintenance.
• Explain the sequence of maintenance.
• Carry out routine servicing of Gears and transmission systems.
• Carry out planning and scheduling of maintenance work.

1. Introduction (05 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

2. Preventive maintenance (10 Periods)

Brief Introduction of General concept of predictive maintenance,corrective maintenance, preventive maintenance and their application and work approach – Condition checking , repair cycle, maintenance stages, classification of equipment’s for repair and their repair complexity (resources wanted in terms of size of maintenance department staff workers, materialsand spaces, annual repair cost of machines and percentage break downs and resulting efficiency etc.), annual and monthly maintenance schedules, man power planning , norms for machine stoppages during preventive maintenance, percentage of equipment to be taken for preventive maintenance of one go . Norms for Maintenance cost , economic effect ofpreventive maintenance.

3. Maintenance stages (05 Periods)

Details of work in each stage for different equipment’s Metalcutting and metal working machine wood working machines,material bundling and equipment’s, Foundry furnaces and various electrical equipment’s on machines. Pumps, air compressors and etc.

4. Sequence of maintenance operations (06 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

5. Planning and scheduling of maintenance work (04 Periods)

Work authorisation and control, standard time formaintenance work, work measurement, worksimplification,concept of break down maintenance.

6. Gears and transmission (14 Periods)

Usual defects occurring in gears during use. Checking forcorrect meshing of gears, wear of teeth, breaking ortwisting of teeth. Burrs on internal splines of the gearbore or tooth surface. Crack or damage on the rim or bore ofthe gear wheel and methods for repair of the defects. Method of removal of gears.
Vee belt drive, Chains and sprocket wheels. Standardsections and length of Veebelts. Defect and repair methodsof pulley grooves. Installation and assembly of Vee belt,care and maintenance of belts. Looking after and settingsright timing belts used in high precision machines.
Different types of standard size chains. Chain wear andtheir repair methods. Design tolerances. Repair methods ofsprocket wheels. Assembly of chain drive.

7. Coupling, clutches and bearings (12 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

List of Experiments:

1. BEARINGS: Inspection, Removal, Cleaning, Lubrication andrefitting of bearings.
2. Maintenance, repair and replacement of couplings and alignment of shaft.
3. Belts and Chain drives:
1. Mounting of belts and checking of slip.
2. Tighten and replacement of chains.
4. To do following exercise with the given small subassembly units:
1. To select tools core removing sub assembly.
2. To remove the sub assembly unit from the equipment/machine.
3. To disassemble unit.
4. To clean the parts prepare a list and draw sketches.
5. To inspect and identify worn out parts.
6. To suggest whether the part deserve replacement, readjustment or recovery. Method of recovery if wanted so.
7. To reassemble sub assembly replacing worn out parts.
5. Preparing decision tree for fault Location. Locating fault and rectifying that for equipment such as Bicycle, Hydraulic pump, water cooler, Refrigerator, A machine tool and An Air Compressor.
6. Maintenance of the various system including Lubrications service for system such as I.C. Engine, Pump, centrifugal , Reciprocal, Air compressor Rotary and reciprocating, Refrigerator, Air conditioner, Any machine tools.
7. Preparation of preventive maintenance schedule for institution machine shop.
8. Maintenance of material handling equipment available in the institution.

Instructional Strategy:

1. Use computer based learning aids for effective teaching-learning
2. Expose the students to real life problems
3. Plan assignments so as to promote problem solving abilities and develop continued learning skills

Means of Assessment:

1. Assignments and quiz/class tests
2. Mid- Semester Examination
3. Group discussion
4. Semester Examination
5. Presentation

Text Books:

1. Industrial Maintenance by HP Garg; S. Chand and Company, Delhi.
2. Installation, Testing and Maintenance by JS Narang, Dhanpat Rai & Sons, New Delhi.
3. Plant Maintenance Engineering by RK Jain; Khanna Publishers, Delhi.
4. Installation, Servicing and Maintenance by SN Bhattacharya; S Chand and Company, Delhi.
5. Maintenance Engineering and Management by RC Mishra and K Pathak; Prentice Hall of India Pvt. Ltd., New Delhi.
6. E-books/e-tools/relevant software to be used as recommended by AICTE/UBTE/NITTTR, Chandigarh.

For detail syllabus of all other subjects of BE Refrigeration & Air Conditioning, 2019-2020 scheme do visit Refrigeration & Air Conditioning 5 syllabus for 2019-2020 Scheme.

Dont forget to download iStudy Mobile App for latest syllabus and results, class timetable and more.

For all other bteup syllabus 6th sem refrigeration & air conditioning 2019-2020 you can visit BTEUP Syllabus 6th Sem Refrigeration & Air Conditioning 2019-2020 Subjects. For all other elective subjects do refer to Electives. The detail syllabus for automobile maintenance, servicing and repair is as follows.

Rationale:

The development of automobile industry and direct orindirect dependence of the present day society on theservices of its products has made the knowledge of thistechnology imperative. The paper deals with automotive needsother than power unit.

Learning Outcomes:

After completion of this course, the students will be able to:

• Explain the importance of engine maintenance and repair.
• Discuss various types of faults in engine.
• Explain the repair process involved automobile engine.
• Describe the maintenance of radiator and lubrication system.
• Explain electrical system repair.
• Discuss the maintenance of vehicle Air Conditioning system.

1. Engine maintenance &repairing : (18 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

2. Repairing processes (10 Periods)

Cylinder re-boring and re-sleeving, Removal of liners andfitting, inspection; Repair and fitting of valve and valveguides, checking the connecting rod for bending andconnecting rod alignment, inspection of crank shaft forovality and regrinding, Phasing and calibration of fuelinjection pump, nozzle testing, cleaning and grinding.

3. Repair & maintenance of radiator and lubricating system: (12 Periods)

Principle of lubrications on multi cylinder engine, Types of Lubrication system-Splash , Pressure, Combined , Types of Lubrication pumps and pump drives , Maintenance of lubricatingsystem, Flushing the lubricating system, Change of usedlubricating oils, clearing and fitting of oil filterlubrication of water pump, grades of oils, multi grade oil,additives for improving the quality of oilRadiator Repair & maintenance.

4. Electrical system Repair & maintenance (14 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

5. Repair & maintenance of vehicle Air Conditioning system (16 Periods)

Testing and Charging of Air Conditioner, care & maintenance electrical components, noise level system, fresh airallowance, primary & secondary circuit, heat exchanger,cooling & dehumidifying coil. Care & servicing-Air controlunit, temperature control unit, magnet clutch, condenser,fanassembly, Evaporator, relays, expansion valve, filters andthree way solenoid valve. Checking of harness of airconditioning.

Means of Assessment:

• Assignments and quiz/class tests
• Mid-term and end-term written tests

Text Books:

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

For detail syllabus of all other subjects of BE Refrigeration & Air Conditioning, 2019-2020 scheme do visit Refrigeration & Air Conditioning 6 syllabus for 2019-2020 Scheme.

Dont forget to download iStudy Mobile App for latest syllabus and results, class timetable and more.

For all other bteup syllabus 5th sem refrigeration & air conditioning 2019-2020 you can visit BTEUP Syllabus 5th Sem Refrigeration & Air Conditioning 2019-2020 Subjects. For all other elective subjects do refer to Electives. The detail syllabus for automobile engineering is as follows.

Rationale:

These days, automobile has become a necessity instead of luxury. The diploma holders inthis course are required to supervise production and repair and maintenance of vehicles. For this purpose, knowledge and skills are required to be imparted to them regarding automobile industry as a whole. This subject aims at developing required knowledge and skills in this area.

Learning Outcomes:

After undergoing this course, the students will be able to :

• Explain the functions of different chassis components and drive types.
• Explain the working of transmission system.
• Explain the working principle of steering system.
• Carry out routine servicing of brake system and bleeding of hydraulic brakes.
• Explain the function and types of suspension systems.
• Carry out testing and charging of lead-acid battery.
• Interpret Bharat norms of exhaust emissions.

1. Introduction (06 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

2. Transmission System (12 Periods)

1. Clutch – Function, Constructional details of single plate and multi plate friction clutches, Centrifugal and semi centrifugal clutch, Cone clutch, Hydraulic clutch
2. Gear Box – Function, Working of sliding mesh, constant mesh and synchromesh gear box, Torque converter and overdrive, Introduction to Automated Manual Transmission, Automatic transmission and Continuously Variable Transmission.
3. Propeller shaft and rear axle – Function, Universal joint, Differential, Different types of rear axles and rear axle drives.
4. Wheels and Tyres – Types of wheels, Types and specifications of tyres used in Indian vehicles, Toe in, toe out, camber, caster, kingpin inclination, Wheel balancing and alignment, Factors affecting tyre life.

3. Steering System (06 Periods)

Function and principle, Ackerman and Davis steering gears, Types of steering gears -worm and wheel, rack and pinion, Power steering-Hydraulic and Electrical.

4. Braking system (08 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

5. Suspension System (08 Periods)

Function and types of Coil spring, leaf spring, Air suspension, Shock absorber -Function, construction and working of Telescopic type.

6. Battery (10 Periods)

Constructional details of lead acid cell battery, Specific gravity of electrolyte -effect of temperature on specific gravity, Specification of battery-capacity, rating , number of plates, selection of battery for particular use, Battery charging,chemical reactions during charge and discharge, Maintenance of batteries, Checking of batteries for voltage and specific gravity. Batteries for electric and hybrid vehicles.

7. Exhaust Emissions (06 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Mobile App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

List of Experiments:

1. Fault and their remedies in Battery Ignition system
2. Adjustment of Head Light Beam
1. Wiper and Indicators.
3. Dismantling and inspection of
1. AC Pump
2. SU Pump
4. Dismantle
1. rear axle
2. differential and find out the gear ratio of crown wheel & driven sun gear and planet pinion.
5. Fault finding practices on an automobile – four wheelers (petrol/ diesel vehicles).
6. Servicing/Tuning of a 2 wheeler/4 wheeler.
7. Servicing of hydraulic brakes :
1. adjustment of brakes
2. bleeding of brakes
3. fitting of leather pads
8. Tuning of an automobile engine.
9. Testing and Charging of an automobile battery and measuring cell voltage and specific gravity of electrolyte.
10. Changing of wheels and inflation of tyres, balancing of wheels.
11. Measuring spark gap, valve clearance and ring clearance; carrying out cleaning operations for adjustment.

Instructional Strategy:

1. Use computer based learning aids for effective teaching-learning
2. Expose the students to real life problems
3. Plan assignments so as to promote problem solving abilities and develop continued learning skills

Means of Assessment:

1. Assignments and quiz/class tests
2. Mid- Semester Examination
3. Group discussion
4. Semester Examination
5. Presentation

Text Books:

1. Automobile Engineering by GBS Narang; Khanna Publishers, Delhi.
2. Automobile Engineering by Dr.Kirpal Singh; Standard Publishers and Distributors, Delhi.
3. Automotive Mechanics, by W.Crouse and Anglin; Tata McGraw Hill, Delhi.
4. Automobile Engineering by G. S. Aulakh; Eagle Prakashan, Jalandhar
5. E-books/e-tools/relevant software to be used as recommended by AICTE/UBTE/NITTTR, Chandigarh.

Reference Books:

http://swayam.gov.in

For detail syllabus of all other subjects of BE Refrigeration & Air Conditioning, 2019-2020 scheme do visit Refrigeration & Air Conditioning 5 syllabus for 2019-2020 Scheme.

Dont forget to download iStudy Mobile App for latest syllabus and results, class timetable and more.