Building Construction and Materials – II Interior Decoration & Design 4th Sem Syllabus for Diploma BTEUP 2017

Building Construction and Materials – II detail BTEUP Diploma syllabus for Interior Decoration And Design, effective from 2017 is collected from BTEUP 2017 Syllabus official website and presented for diploma students. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other interior decoration & design 4th sem bteup diploma syllabus 2017 you can visit Interior Decoration & Design 4th Sem BTEUP Diploma Syllabus 2017 Subjects. The detail syllabus for building construction and materials – ii is as follows.

Rationale:

A diploma student in interior decoration and design are supposed to prepare design and detail drawing representing interior design,constructional system and component. In this subject skill will be given to prepare design and details of doors,window,partitions, wall panelling and claddings, stare cases and floor finishes, etc. by using various materials.

SECTION A

MATERIALS-PART A

1. WOOD PRODUCTS :

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

2. LAMINATES :

Properties and application of all types of plastic laminates.

3. THERMAL ACOUSTIC MATERIALS :

Study of different types of materials used for sound proofing.Properties and use of the following : Polyurethane products such as low density and high density, fibre glasses

4. GLASS AND MIRRORS :

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

5. PAINTS, VARNISHES, POLISHES, DISTEMPERS, ETC. :

Wall and furniture finishes like paints. Water base paints, dry distempers, plastic emulsion distempers, cement paints, varnishes, polishes lacquer, tar and bitumen, silica paints, solygnum black paints and their trade names, properties, covering capacity, handling technique & uses.

6. CLADDING :

Wall papers, Fabric for wall lining. Flooring/Cladding materials – such as stones, granite, slate, marble, mosaic and cement tiles & ceramic tiles, P.V.C. and metallic claddings, Aluminium composite panel in wall cladding.

7. WATER PROOFING MATERIALS :

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

NOTE :

1. Sample for each of the above may be collected and demonstrated/exhibited to the students during the course of the lecturers.
2. Students should be encouraged to collect these samples and maintain their own record through scrap book containing brochures samples, etc.

8. FINISHING MATERIALS :

1. Different types of flooring materials
2. Different types coatings such as distemper, emulsion, paints and acrilic paints, etc.
3. Claddings such as wall paper, wood board, metals, plastic tiles, fabric, etc.
4. Different types of ceiling materials such as :
1. Plaster of peris/gypsum
2. Various types of tiles
3. Metals (Aluminium, Steel)
4. Plastics
5. Fibre glass/glass
6. Wood based

9. FURNISHING MATERIALS :

1. Flooring :

Different types of carpets and drugets :

1. Woollen Carpet :
1. Hand Made Carpets
2. Hand tufted carpets
3. Machine made carpet

– Cutpile
– Uncutpile.
Quality of raw wool, quality of other raw materials used;
Impact of colours; Technical specification : Knots/Tuffs per Sqr.
cm. pile height, Ply of yarn, count of yarn, weight, fastness, flame resistance tests, resilience tests and accousitic quality, trade names, ISI and wool mark.
Sizes and mode of measurements.

2. Installation :

Installation of wall to wall carpets on floor fixing, carpets on wall ceiling for acoutics; joining, edge binding and fringing of carpets. Fitting and accessories; Types of underlays; How to remove a fitted wall to wall carpet; How to relay wall to wall carpet.

3. Care & Maintenance :

Visits to manufacturing units and study wall to wall laying of carpet in process.

2. Curtain Materials (Draperies) :
1. TYPES :

Cotton curtains; Silk curtains; Cotton silk mixed; Synthetic fibre curtain; Woollen curtains; Synthetic and wool blended curtains; Flame resistant property. Wrap and weft texture, dyes blends, weight, cost, care of the above.

2. Types of curtains like plain, french pleated, etc.
3. Lining materials
4. Fittings used – Curtain rods, rings, railing, hooks, sliding, stage curtains.
5. Venetain blinds and space curtains.
3. Upholstery Covering Material (Tapestries & Other Items).

Introduction to various kinds of tapestries and their basic distinguishing qualities

1. Cotton
2. Silk
3. Synthetic
4. Woolen
5. Raxine
6. Leather
7. Blended

To study the their properties, design, dye, texture, size, weight, stitching and care

4. Cushioning materials: Springs; Jute, cotton, foams, rubber.
5. Miscellenous Items: cane, jute, leather straps, slip covers, fasteners, etc.
6. Other Furnishings : – Bed cover, cushion covers – their designs, stitchings, (handloom, mill made, tufted candlemick, khadi and other types – both woven and printed). – Table liner bath mats, toilet sets, etc. – Latest items of furnishings and visits.

10. FITTINGS :

1. Doors, windows, ventilators fittings in various metals like iron, mild steel and stainless steel, brass, aluminium, plastics, etc. Fittings like Handles, bolts, hinges, springs, locks, latches, patch fitting for frameless glass partition and doors etc.
2. Visits to factories/show rooms for varieties, design and prices, etc.

NOTE :

Demonstration of the various furnishing and fittings materials may be arranged in the class room to make the subject more interesting and meaningful. Students should be encouraged to collect samples and maintain a museum of material of their own. They may be advised to collect photographs of fittings and maintain an album/scrap book. Preparation of drawings for the following :

SECTION B

CONSTRUCTION-PART B

1. Sliding doors and Windows. (Wooden & Metal)
2. Sliding and folding doors. (Wooden & Metal)
3. Simple partition (in wood, glass and metal)
4. Different types of damp proofing of interiors.
5. Panelling in plywood, plyboard, wood, laminates, aluminium composite panel, claddings.
6. Stair cases – Layout of stair cases; types of stair cases; method of calculating treads and rises; Definition of various terms. Preparing drawing for a simple staircase R.C.C./Timber/Steel.
7. Floor finishes – various types of floor finishes and in their constructional details

For detail syllabus of all other subjects of BE Interior Decoration & Design, effective from 2017 do visit Interior Decoration & Design 4th Sem BTEUP syllabus for 2017.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.