Building Const & Maint Engg Env, Poll & Con 4th Sem Syllabus for Diploma BTEUP 2017

Building Const & Maint Engg detail BTEUP Diploma syllabus for Civil Engineering (Environmental Pollution & Control), effective from 2017 is collected from BTEUP 2017 Syllabus official website and presented for diploma students. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other env, poll & con 4th sem bteup diploma syllabus 2017 you can visit Env, Poll & Con 4th Sem BTEUP Diploma Syllabus 2017 Subjects. The detail syllabus for building const & maint engg is as follows.

Rationale:

The important job of a civil engineering
technician is to supervise the construction of various civil
engineering structures. This subject deals with broad
aspects of construction, primarilly of building
construction. The topics detailed in the contents are
intended to aquaint student about the procedure of
construction so that he is better equipped to perform his
duties in the field. It is important that teachers organise
regular field visits to show buildings under construction.
Some experts from field shall be invited to deliver
extension lectures.

DETAILED CONTENTS:

1. Introduction:

1. Definition of a building, classification of buildings based on occupancy.
2. Different parts ofa building. Orientation of buildings. Site selection.
3. Exposure to building bylaws/master plan and building approval.

2. Foundation

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

3. Walls

1. Purpose of walls;
2. Classifcation of walls-Load Bearing and Non Load Beariang. Dwarf wall.
3. Classification of walls as per materials of construction, brick, stone, reinforced brick, reinforced concrete, precast hollow and solid concrete block and composite masonry walls.
4. Brick masonry- Definition of terms; mortar, bond , facing, backing, hearting, column, pillar, jambs, reveals, soffit, plinth, plinth masonry, Brick: header, stretcher, bed of brick, bat,queen closer, king closer, frog and quoin.
1. Bond-Meaning and necessity: Types of bond and thier suitability (English,Flamish,Header and Stretcher) 1, 1-1/2 and 2 Brick thick walls in English Bond. T, X and right angled corner junctions. Sketches for 1, 1-1/2 and 2 brick square pillars in English Bond.
2. Construction of Brick walls-Method of laying bricks in walls, precautions observed in the construction of walls, method of bondinbg new brick work with old (Toothing,raking back and block bonding).
3. Construction and Expansion Joints.
5. Stone Masonry
1. Glossary of terms-Natural bed of a surface, beding planes, string course, corbel, cornice, block-incourse,grouting, mouldings, templates, throating, through stones,parapet,coping, spalls, pilaster and buttress.
2. Rubble Masonry; random and coarsed, Ashlar Masonry, Ashlar fine, Ashlar roughtooled Ashler facing, specifcations for coarsed rubble masonry, principles to be observed in construction of stone masonry walls.
6. Partition walls:Constructional details, suitability and uses of brick and wooden partition walls.
7. Mortars-preparation, use and average strength of cement, lime, lime cement, lime surkhi and mud mortar.
8. Scaffolding:Constructional details suitability of Mason’s Brick Layers Tubular and and scaffolding Centering & Shultering.
9. Shoring & under pinning: Types and uses.
10. Safety in construction of low rise and high rise buildings.

4. Arches and Lintels

1. Meaning and use of Arches and Lintels.
2. Glossary of terms used in Arches and Lintels-Abutment, Peir, Arch ring, Intrados, Soffit Extrados, Voussoiers, Springer, Springing line, Crown, Key stone, Skew back, Span, Rise, Depth of an Arch, Haunch, Spandril, Jambs, Bearing,Thickness of lintel,Effective span.
3. Arches:
1. types of Arches-Semi circular, segmental, elliptical and parabolic,flat, inverted and relieving.
2. Stone arches and their construction.
3. Brick arches and their construction.

5. Doors and windows:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

6. Damp Proofing

1. Dampness and its ill effects on bricks, plaster, wooden fixtures, metal fixtures and reinforcement, damage to asthetic appearance. Damage to heat insulating materials, Damage to stored articles and health.
2. Types of dampness-moisture penetrating the building from outside e.g. rainwater, surface water, ground moisture.

Moisture entrapped during constrcution i.e. moisture in concrete, masonry construction and plastering work etc.
Moisture which originates in the building itself i.e water in kitchen and bath rooms etc.

3. Damp proofing materials and their specifications rich concrete and mortar, bitumen, bitumen mastic.
4. Methods of damp proofing basement, ground floors, plinth and walls, special damp proofing arrangements in bathrooms, W.C. and Kitchen, Damp Proofing for roofs and window sills.
5. Plinth Protection and Aprons.

7. Floors

1. Ground floors:
1. Glossary of terms-floor finish, topping, under layer,base course, rubble filling and their purpose.
2. Types of floor finishes-cast in situ concrete flooring (monolithic, bonded) Terrazo tile flooring. Terrazo flooring, Timber flooring. Description with sketches of the methods of construction of the floors and their specifications. Floor polishing equipment.
2. Upper floors:
1. Flooring on RCC Slab.
2. Flooring on RB Slab.

8. Roofs:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

9. Stairs and staircase:

1. Glossary of terms:Stair case winders landing, strings, newel, baluster,riser,tread,width of staircase, hand rail, nosing.
2. Planning and layout of staircase: Relations between rise and tread, determination of width of stair, landing etc. Various types of layout-straight flight,dog legged, open well, quarter turn, half turn, (Newel and geometrical staircase). Bifurcated stair, spiral stair.

10. Surface Finishes:

1. Plastering-Classification according to use and finishes like grit finish, rough cast, pebble dashed, plain plaster etc. Dubbing, Propertion of mortars used for different plasters, preparation of mortars, techniques of plastering and curing.
2. Pointing-Different types of pointing, mortar used and method of pointing.
3. Painting-preparation and application of paints on wooden,steel and plastered wall sufaces.
4. White washing, colour washing and distempering. Application of cement and plastic paints.
5. Commonly used water repelants for exterier sufaces,their names and application.

11. Ventilation and Air Conditioning

Natural and Artifical Ventilation. Requirements of comfort conditions, temperature control, mechanical ventilation, plenum system, exhaust system,air filter of different types, principle of Air Conditioing Plant (no construction detail).

12. Fire Fighting

Causes of fire, spread of fire, fire fighting equipment and different method, of fire fighting, sprinklers, fire regulations and requirement. Fire insurance. Indian Standard.

13. Priniciples of Maintenace

1. Definition, of maintenance, decay and deterioration of building/building camponents.
2. Sources and cuases of deterioration and decay in building.
3. Factors influencing the decision to carry out maintenance of building.

14. Maintenance Practice

1. Defects, causes and repairs in structural elements of buildings such as
1. Foundation
2. Walls
3. Floors
4. Roof
5. Components such a doors, windows and ventilators etc.
2. Defects, causes and repairs in surface finishes such as
1. White and colour washing
2. Distempering
3. Cement Plastering,
4. Painting of timber and steel surface
3. Defects, causes and repairs in building due to leakage and seepage & their prevention
4. Defects cuases and repair in internal environment of building such as
1. Heating
2. Ventilation and Air conditioning
3. Lighting
5. P.W.D. Practices with respect to maintenance of building e.g. annual repairs, special repairs.

15. Safety in Maintenance

Necessity, specific safety measures at site barricades, signals, helmets.

16. Water Harvesting :

1. Causes of depletion of water label in state.
2. Present scenerio of ground water in state.
3. Significance of hydrological parameters.
4. Rain water harvesting.
5. Roof top rain water harvesting.
6. Methods of ground water recharging.
7. Precaution in ground water recharging.
8. Laws and regulation.
9. About Clean/Green energy concept.

LABORATORY WORK

Building Construction & Maintenance Lab

1. Layout of a building.
2. To construct brick bonds (English and Flemish bonds) in one, one and half and two brick thick
1. walls. L, T and cross junction.
2. Columns
3. Visit to construction site for showing the following item of works and to write specific report about the works seen.
1. Timbering of excavated Trenching
2. Construction of Masonry Walls
3. Flooring: Laying of flooring on an already prepared lime concrete base.
4. Plastering and Pointing of wall
5. Finishing of wall surface by Lime, Distemper, Snowcem, etc. and calculation of material in 100 Sqm. wall area
6. Use of Special type of shuttering/crains/heavy machines in construction work.

For detail syllabus of all other subjects of BE Env, Poll & Con, effective from 2017 do visit Env, Poll & Con 4th Sem BTEUP syllabus for 2017.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.