Basics of Mechanical & Civil Engineering Automobile 2nd Sem Syllabus for Diploma BTEUP 2017

Basics of Mechanical & Civil Engineering detail BTEUP Diploma syllabus for Mechanical Engineering (Automobile), effective from 2017 is collected from BTEUP 2017 Syllabus official website and presented for diploma students. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other automobile 2nd sem bteup diploma syllabus 2017 you can visit Automobile 2nd Sem BTEUP Diploma Syllabus 2017 Subjects. The detail syllabus for basics of mechanical & civil engineering is as follows.

Rationale:

Apart from the common core subjects, some engineering subjects are included in the diploma course of electrical engineering. One of these subjects is Elementry Mech. & Civil Engg. to impart some necessary knowledge and skill about civil and mechanical nature. Inclusion of the subject is further justified by the fact that in practical field, any job of electrical technician is intermingled with either civil or mechanical engineering. As such the relevant basic topics of these disciplines are included in the content of the subject.
Some study exercises along with some field work have been suggested to give feel of jobs and equipments involved.

DETAILED CONTENTS

1. Thermal Engg.

1. SOURCES OF ENERGY:

Definition, Concept of thermodynamic system and surroundings, Closed system, Open system, Isolated system, Thermodynamics definition of work.Zeroth low of thermodynamics
Basic ideas, conventional and nonconventional forms-Thermal, Hydel, Tidal, wind, Solar, Biomass and Neuclear and their uses.

2. FUELS & COMBUSTION:

Introduction to common fuels – solid, liquid and gases and their composition. Combustion of fuels- their higher and lower calorific values. Combustion equations for carbon, sulphur, hydrogen and their simple compounds. Calculation of minimum amount of air required for complete combustion. Combustion analysis on mass basis and on volume basis. Concept of excess air in a boiler furnace combustion. Heat carried away by flue gases. Analysis of flue gases by Orsat apparatus. Simple numerical problems
Idea of specific properties of liquid fuels such as detonation, knock resistance (cetane and octane numbers), viscosity, solidification point, flash point and flame point.

2. MACHINE COMPONENTS:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

3. LUBRICATION:

Different lubrication system for lubricating the components of machines.
Principle of working of wet sump and dry sump system of lubrication. ( Explain with simple line diagram). Selection of lubricant bsed on different application (Requirement with the help of manufacturer catalogue).

4. Civil Engineering Materials:

General idea of raw materials, manufacturing process, properties and uses of Bricks, lime, cement and Timber.

5. Foundation

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

6. Surveying

1. Basics of chaining and leveling
2. Description of Instruments used

NOTE: While teaching theory it is important to bring and show the machine components to the students.

BASICS OF MECH. & CIVIL ENGG. LAB.

Part I :(Mechanical Engineering Laboratory/Hydraulics laboratory)

1. Study and Sketch of Pins and Cottor
2. Study and Sketch of Keys and Key ways
3. Study and Sketch of Couplings and Clutches
4. Study and Sketch of Bearings
5. Study and Sketch of Springs.
6. Study of green energy.

Part II: (Civil Engineering Laboratory): Study and Sketch of models

1. Chain survey of a small area
1. Ranging a line
2. Chaining a line
3. Taking offset on the chain line and recording the field book.
2. Leveling
1. To find the difference in level between several points by single setting by the use of dumpy level.
2. To find the difference in level between two distant points by
3. Rise & Fall method,
4. Line of collimation method.

Models:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

For detail syllabus of all other subjects of BE Automobile, effective from 2017 do visit Automobile 2nd Sem BTEUP syllabus for 2017.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.