{"id":29640,"date":"2025-04-14T17:59:37","date_gmt":"2025-04-14T12:29:37","guid":{"rendered":"https:\/\/www.inspirenignite.com\/mh\/315357-mould-die-design-syllabus-for-polymer-technology-5th-sem-k-scheme-msbte-pdf\/"},"modified":"2025-04-14T17:59:37","modified_gmt":"2025-04-14T12:29:37","slug":"315357-mould-die-design-syllabus-for-polymer-technology-5th-sem-k-scheme-msbte-pdf","status":"publish","type":"post","link":"https:\/\/www.inspirenignite.com\/mh\/315357-mould-die-design-syllabus-for-polymer-technology-5th-sem-k-scheme-msbte-pdf\/","title":{"rendered":"315357: Mould & Die Design Syllabus for Polymer Technology 5th Sem K Scheme MSBTE PDF"},"content":{"rendered":"

Mould & Die Design detailed Syllabus for Polymer Technology (PO), K scheme PDF has been taken from the MSBTE<\/a> official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical\/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below. <\/p>\n

For all other MSBTE Polymer Technology 5th Sem K Scheme Syllabus PDF, do visit MSBTE Polymer Technology 5th Sem K Scheme Syllabus PDF Subjects<\/a>. The detailed Syllabus for mould & die design is as follows.<\/p>\n

Rationale<\/h4>\n

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App<\/a>
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.<\/b>
\"Get<\/a>.<\/p>\n

Course Outcomes:<\/h4>\n

Students will be able to achieve & demonstrate the following COs on completion of course based learning<\/p>\n

    \n
  1. Apply the knowledge of injection mould terminology to classify various moulds.<\/li>\n
  2. Choose the appropriate feed, cooling and ejection system for the given injection moulded product.<\/li>\n
  3. Use the knowledge of compression mould and transfer mould to select the appropriate type of mould for specific applications.<\/li>\n
  4. Select appropriate blow mould designs for given applications.<\/li>\n
  5. Apply die design concepts to select relevant dies for products like sheets, films, pipes, and cables.<\/li>\n<\/ol>\n

    Unit I<\/h4>\n

    Injection Mould Terminology 1.1\tIntroduction and Classification of moulds: Two plate mould and three plate mould. 1.2\tGeneral construction of injection mould: fixed half, moving half, Core, cavity, core plate, cavity plate, back plate and base plate, guide pin, guide bush, sprue bush, cold slug well, register ring, types of inserts, bolster and its types. 1.3\tInjection mould terminologies and systems: Daylight, draft, mould shrinkage, parting surface, parting lines, venting, Introduction and need of systems: feed system, cooling system and ejection system (definitions only). 1.4\tMethods of determination of number of cavities. Numerical based on determination of number of cavities. 1.5\tClassification of moulds based on Feed type: Hot runner mould, Runnerless mould, based on parting surface: split mould.\n<\/p>\n

    Suggested Learning Pedagogie<\/i>
    \nLecture Using Chalk-Board Presentations Video Demonstrations Model Demonstration Hands-on Site\/Industry Visit\n<\/p>\n

    Unit II<\/h4>\n

    For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App<\/a>
    It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.<\/b>
    \"Get<\/a>.<\/p>\n

    Unit III<\/h4>\n

    Compression and Transfer Moulds 3.1\tDescription and constructional details of flash type, semipositive type and positive type compression mould. 3.2\tDescription and constructional details of type transfer mould – integral pot, auxiliary ram and loose plate 3.3\tDescription and constructional details of types of sprue bush for transfer mould. 3.4\tHeating Systems for Moulds: Types of heating – thermic fluid heating, steam heating, electrical heating: types of electrical heaters- band and cartridge heaters.\n<\/p>\n

    Suggested Learning Pedagogie<\/i>
    \nLecture Using Chalk-Board Presentations Video Demonstrations Model Demonstration Hands-on Site\/Industry Visit\n<\/p>\n

    Unit IV<\/h4>\n

    Blow Moulds 4.1\tConstructional details of parison die and programmable parison die. 4.2\tBasic design of pinch off and neck. 4.3\tVenting and its types used in blow mould. 4.4\tDescription and constructional details of extrusion blow mould 4.5\tDescription and constructional details of injection blow mould. 4.6\tDescription and constructional details of stretch blow mould.\n<\/p>\n

    Suggested Learning Pedagogie<\/i>
    \nLecture Using Chalk-Board Presentations Video Demonstrations Model Demonstration Hands-on Site\/Industry Visit\n<\/p>\n

    Unit V<\/h4>\n

    For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App<\/a>
    It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.<\/b>
    \"Get<\/a>.<\/p>\n

    List of Experiments:<\/h4>\n
      \n
    1. *Draw various parts of injection mould and study their function.<\/li>\n
    2. *Draw various types of runner and gates used in Injection mould design.<\/li>\n
    3. Draw various types of cooling methods used in injection mould design for integer core and cavity.<\/li>\n
    4. *Draw various types of cooling methods used in Injection mould design for Insert core and cavity.<\/li>\n
    5. Prepare a drawing of two plate injection mould with specifications\/dimensions etc.<\/li>\n
    6. *Draw a plane and sectional view for injection mould from given sample drawing showing details of moving half.<\/li>\n
    7. Prepare a drawing of three plate injection mould with specifications\/ dimensions etc.<\/li>\n
    8. Draw a split cavity injection mould by finger cams for external undercut product.<\/li>\n
    9. *Prepare a drawing of types of compression mould with specifications\/ dimensions etc.<\/li>\n
    10. *Prepare a drawing of types of transfer moulds with specifications\/ dimensions etc.<\/li>\n
    11. *Prepare a drawing of a Blow mould with specifications\/ dimensions etc.<\/li>\n
    12. *Prepare a drawing of a Pipe die (straight \/offset die) with specifications\/ dimensions etc.<\/li>\n
    13. Prepare a drawing of a Blown film die(side fed \/bottom fed die) with specifications\/ dimensions etc.<\/li>\n
    14. Prepare a drawing of injection mould by using CAD software<\/li>\n
    15. Prepare a drawing of any extruder die by using CAD software.<\/li>\n<\/ol>\n

      Self Learning<\/h4>\n<\/p>\n

      Micro Project<\/i><\/p>\n