{"id":29196,"date":"2025-04-14T14:46:40","date_gmt":"2025-04-14T09:16:40","guid":{"rendered":"https:\/\/www.inspirenignite.com\/mh\/314018-cnc-programming-syllabus-for-mechanical-engineering-4th-sem-k-scheme-msbte-pdf\/"},"modified":"2025-04-14T14:46:40","modified_gmt":"2025-04-14T09:16:40","slug":"314018-cnc-programming-syllabus-for-mechanical-engineering-4th-sem-k-scheme-msbte-pdf","status":"publish","type":"post","link":"https:\/\/www.inspirenignite.com\/mh\/314018-cnc-programming-syllabus-for-mechanical-engineering-4th-sem-k-scheme-msbte-pdf\/","title":{"rendered":"314018: Cnc Programming Syllabus for Mechanical Engineering 4th Sem K Scheme MSBTE PDF"},"content":{"rendered":"

Cnc Programming detailed Syllabus for Mechanical Engineering (ME), K scheme PDF has been taken from the MSBTE<\/a> official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical\/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below. <\/p>\n

For all other MSBTE Mechanical Engineering 4th Sem K Scheme Syllabus PDF, do visit MSBTE Mechanical Engineering 4th Sem K Scheme Syllabus PDF Subjects<\/a>. The detailed Syllabus for cnc programming is as follows.<\/p>\n

Rationale<\/h4>\n

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App<\/a>
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.<\/b>
\"Get<\/a>.<\/p>\n

Course Outcomes:<\/h4>\n

Students will be able to achieve & demonstrate the following COs on completion of course based learning<\/p>\n

    \n
  1. Develop manual part program for CNC lathe and milling machine.<\/li>\n
  2. Simulate the part program using simulation software.<\/li>\n
  3. Produce job on CNC lathe and milling machine.<\/li>\n<\/ol>\n

    Unit I<\/h4>\n

    Fundamentals of CNC programming 1.1\tDefinition- program, programmer and programming . 1.2\tAxes identification and nomenclature for CNC lathe and CNC milling machines. 1.3\tConcept of tool offsetting and presetting. 1.4\tTerminology used for program in Word Address Format (WAF). 1.5\tStepwise procedure for programming- study the given part drawing, set of instructions to the machine, problem definition, sequence of machining operation and process sheet, decide- material & stock size, work zero, unit, coordinate system (Absolute & Incremental), tool, cutting parameters and coordinate points.\n<\/p>\n

    Suggested Learning Pedagogie<\/i>
    \nDemonstrati Lecture Usin Chalk-Board\n<\/p>\n

    Unit II<\/h4>\n

    For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App<\/a>
    It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.<\/b>
    \"Get<\/a>.<\/p>\n

    Unit III<\/h4>\n

    Canned & Sub-routine call programming 3.1 Concept- canned cycle, subroutine call. 3.2 Facing, step and taper turning canned cycle, respective G & M codes, procedure to write canned cycle program, its importance. 3.3 Concept of sub-routine call, respective G & M code, procedure of sub-routine call to write program, its importance.\n<\/p>\n

    Suggested Learning Pedagogie<\/i>
    \nDemonstrati Lecture Usin Chalk-Board\n<\/p>\n

    List of Experiments:<\/h4>\n
      \n
    1. * Facing operation on CNC lathe by Linear interpolation function. 2\tC<\/li>\n
    2. * Verify part program of linear interpolation function prepared in Practical No.1 by using suitable simulation software. 2\tC<\/li>\n
    3. Conduct DRY run of Practical No.1 on CNC lathe machine. 2\tC<\/li>\n
    4. * Execution of part program prepared in Practical No.1 on CNC lathe machine. 4\tC<\/li>\n
    5. * Slotting operation on CNC milling by Linear interpolation function. 2\tC<\/li>\n
    6. * Verify part program of linear interpolation function prepared in Practical No.5 by using suitable simulation software. 2\tC<\/li>\n
    7. Conduct DRY run of Practical No.5 on CNC milling machine. 2\tC<\/li>\n
    8. * Execution of part program prepared in Practical No.5 on CNC milling machine. 4\tC<\/li>\n
    9. * Circular path operation on CNC lathe by circular interpolation function. 2\tC<\/li>\n
    10. * Verify part program of circular interpolation function prepared in Practical No.9 by using suitable simulation software. 2\tC<\/li>\n
    11. Conduct DRY run of Practical No.9 on CNC lathe machine. 2\tC<\/li>\n
    12. * Execution of part program prepared in Practical No.9 on CNC lathe machine. 4\tC<\/li>\n
    13. * Circular path operation on CNC milling by circular interpolation function. 2\tC<\/li>\n
    14. * Verify part program of circular interpolation function prepared in Practical No.13 by using suitable simulation software. 2\tC<\/li>\n
    15. Conduct DRY run of Practical No.13 on CNC milling machine. 2\tC<\/li>\n
    16. * Execution of part program prepared in Practical No.13 on CNC milling machine. 4\tC<\/li>\n
    17. Facing, step and taper turning operation by canned cycle. 2\tC<\/li>\n
    18. Verify part program of canned cycle prepared in Practical No.17 by using suitable simulation software. 2\tC<\/li>\n
    19. Conduct DRY run of Practical No.17 on CNC lathe machine. 2\tC<\/li>\n
    20. Execution of part program prepared in Practical No.17 on CNC lathe machine. 4\tC<\/li>\n
    21. Slotting operation on CNC milling by subroutine call. 2\tC<\/li>\n
    22. Verify part program of subroutine call prepared in Practical No.21 by using suitable simulation software. 2\tC<\/li>\n
    23. Conduct DRY run of Practical No.21 on CNC milling machine. 2\tC<\/li>\n
    24. Execution of part program prepared in Practical No.21 on CNC milling machine. 4\tC<\/li>\n<\/ol>\n

      Laboratory Equipment<\/h4>\n

      For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App<\/a>
      It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.<\/b>
      \"Get<\/a>.<\/p>\n

      Learning Materials<\/h4>\n
        \n
      1. P. M. Agrawal And V. J. Patel\tCNC Fundamentals and Programming\tCharotar Publishing House Pvt. Limited.ISBN:9788185594989 ,Edition-2009<\/li>\n
      2. Pawan Negi, Mangey Ram, Om Prakash Yadav\tBasics of CNC Programming\tRiver Publishers.ISBN:9781000792911,Edition-202<\/li>\n
      3. Kaushik Kumar, Chikesh Ranjan, J. Paulo Davim\tCNC Programming for Machining\tSpringer International Publishing.ISBN:9783030412791,Edition-2020.<\/li>\n
      4. Binit Kumar Jha\tCNC Programming Made Easy\tVikas Publishing House.ISBN: 9788125911807,Edi 2003<\/li>\n
      5. Ibrahim Zeid\tCAD\/CAM Theory and Practice\tMcGraw Hill Education.ISBN:0070151342,Edition 2009<\/li>\n
      6. Pabla B. S. & M. Adithan\tCNC Machines\tNew Age International Private Limited.ISBN:978-9388818445,Edition-2023.<\/li>\n<\/ol>\n

        Learning Websites<\/h4>\n
          \n
        1. https:\/\/www.youtube.com\/watch?v=ih4Q8TJOI5I\tHow to create your first turning program in CN Simulator<\/li>\n
        2. https:\/\/www.youtube.com\/watch?v=m_FVE4Q59gU\tCNC Milling Simulator<\/li>\n
        3. https:\/\/www.youtube.com\/watch?v=_5r2XR1h1aQ\tCNC programming<\/li>\n
        4. https:\/\/www.youtube.com\/watch?v=PN_tGm5Gip4\tCNC machines and Interpolation<\/li>\n
        5. https:\/\/www.youtube.com\/watch?v=B7MM5M7DzpM\tIntroduction to CNC machines<\/li>\n
        6. https:\/\/www.youtube.com\/watch?v=Gi42gKGiCl0\tIntroduction to CNC machines.<\/li>\n
        7. https:\/\/www.youtube.com\/watch?v=YpQMUpWOgbE&t=2s\tProgramming a CNC Lathe to make a bush – p G71 roughing cycle<\/li>\n
        8. https:\/\/www.youtube.com\/watch?v=wYebU4JSkGQ\tStep Turning With Simulation<\/li>\n<\/li>\n<\/ol>\n

          For detail Syllabus of all other subjects of Mechanical Engineering, K scheme do visit Mechanical Engineering 4th Sem Syllabus for K scheme<\/a>.<\/p>\n

          For all Mechanical Engineering results, visit MSBTE Mechanical Engineering all semester results<\/a> direct links.<\/p>\n","protected":false},"excerpt":{"rendered":"

          Cnc Programming detailed Syllabus for Mechanical Engineering (ME), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, […]<\/p>\n","protected":false},"author":2351,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"footnotes":""},"categories":[118,159],"tags":[],"class_list":["post-29196","post","type-post","status-publish","format-standard","hentry","category-4th-sem-msbte","category-me-msbte"],"_links":{"self":[{"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/posts\/29196","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/users\/2351"}],"replies":[{"embeddable":true,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/comments?post=29196"}],"version-history":[{"count":0,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/posts\/29196\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/media?parent=29196"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/categories?post=29196"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/tags?post=29196"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}