{"id":28975,"date":"2025-04-14T14:36:41","date_gmt":"2025-04-14T09:06:41","guid":{"rendered":"https:\/\/www.inspirenignite.com\/mh\/314019-mechanical-measurement-syllabus-for-automobile-engineering-4th-sem-k-scheme-msbte-pdf\/"},"modified":"2025-04-14T14:36:41","modified_gmt":"2025-04-14T09:06:41","slug":"314019-mechanical-measurement-syllabus-for-automobile-engineering-4th-sem-k-scheme-msbte-pdf","status":"publish","type":"post","link":"https:\/\/www.inspirenignite.com\/mh\/314019-mechanical-measurement-syllabus-for-automobile-engineering-4th-sem-k-scheme-msbte-pdf\/","title":{"rendered":"314019: Mechanical Measurement Syllabus for Automobile Engineering 4th Sem K Scheme MSBTE PDF"},"content":{"rendered":"

Mechanical Measurement detailed Syllabus for Automobile Engineering (AE), K scheme PDF has been taken from the MSBTE<\/a> official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical\/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below. <\/p>\n

For all other MSBTE Automobile Engineering 4th Sem K Scheme Syllabus PDF, do visit MSBTE Automobile Engineering 4th Sem K Scheme Syllabus PDF Subjects<\/a>. The detailed Syllabus for mechanical measurement is as follows.<\/p>\n

Rationale<\/h4>\n

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App<\/a>
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.<\/b>
\"Get<\/a>.<\/p>\n

Course Outcomes:<\/h4>\n

Students will be able to achieve & demonstrate the following COs on completion of course based learning<\/p>\n

    \n
  1. Use relevant linear measuring instrument and gauges for measurement in automobile engineering situations.<\/li>\n
  2. Select relevant instrument for measurement of physical parameters of system.<\/li>\n
  3. Measure the different geometrical tolerances of automotive components.<\/li>\n
  4. Use relevant instrument for measurement of various functional parameters of automotive compone<\/li>\n<\/ol>\n

    Unit I<\/h4>\n

    Overview of Measurement 1.1\tDefinition of metrology, objectives of metrology, types of metrology, Need of inspection. 1.2\tCharacteristics of instruments: Least count, Accuracy, Precision, Reliability, Calibration, Hysteresis, Dead Zone, Drift, Sensitivity, Threshold, Repeatability, Reproducibility. 1.3\tLinear measuring Instruments: Working principle and calibration of Vernier caliper, micrometer, height gauge and depth gauge. 1.4\tTypes of Errors and its sources in Measurements. 1.5\tGauges and Comparators: Definition, Classification, Use of comparators, working principle (Merits and Demerits) of Dial indicator, Sigma Comparator and Pneumatic Comparator, Taylor’s principle of Gauge design, Plug, Ring Gauges, Snaps gauges, Wringing of Slip Gauges.\n<\/p>\n

    Suggested Learning Pedagogie<\/i>
    \nChalk-Board Presentations Video Demonstratio\n<\/p>\n

    Unit II<\/h4>\n

    For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App<\/a>
    It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.<\/b>
    \"Get<\/a>.<\/p>\n

    Unit III<\/h4>\n

    Miscellaneous Measurement 3.1\tDisplacement Measurement: working principal of Capacitive transducer, Potentiometer, LVDT. 3.2\tPressure Measurement: Working principal of Pressure Gauge- Bourdon tube, Electrical resistance type pressure measurement devices. 3.3\tTemperature Measurement: Working principal of Bimetallic strip gauge, thermometer and thermocouple. 3.4\tShaft power measurement: Eddy Current Dynamometer. 3.5\tSpeed measurement – Working principal of Tachometer and Stroboscope.\n<\/p>\n

    Suggested Learning Pedagogie<\/i>
    \nChalk-Board Presentations Video Demonstratio\n<\/p>\n

    List of Experiments:<\/h4>\n
      \n
    1. *Measurement of Length and weight by using ancient measurement system (IKS) 2\tC<\/li>\n
    2. *Measurement of dimensions of component using vernier caliper, vernier height gauge, vernier depth gauge, micrometer and inside micrometer. 2\tC<\/li>\n
    3. Roundness checking of the given component using dial indicator \/ dial gauge. 2\tC<\/li>\n
    4. *Parallelism checking of the given component using dial indicator \/ dial gauge. 2\tC<\/li>\n
    5. Measurement of flatness of given component by using optical flats. 2\tC<\/li>\n
    6. Inspection of given size attribute by using a pneumatic comparator. 2\tC C<\/li>\n
    7. *Measurement of unknown angle of a component using Bevel Protractor and verification by Sine bar. 2\tC<\/li>\n
    8. *Measurement of the screw thread elements by using screw thread micrometer and verification by optical profile projector\t2\tC<\/li>\n
    9. *Measurement of the gear tooth elements using gear tooth vernier caliper and verification by optical profile projector. 2\tC<\/li>\n
    10. *Measurement of the surface roughness of machined surface by using surface roughness tester. 2\tC<\/li>\n
    11. *Measurement of displacement by using Linear Variable Displacement Transducer (LVDT). 2\tC<\/li>\n
    12. Measurement of temperature by thermocouple and Verification by thermometer. 2\tC<\/li>\n
    13. *Measurement of Pressure by using Bourdon Pressure gauge\t2\tC<\/li>\n
    14. Measurement of speed of rotating shaft by Tachometer or Stroboscope\t2\tC<\/li>\n
    15. Measurement of engine torque by Eddy current dynamometer. 2\tC<\/li>\n<\/ol>\n

      Self Learning<\/h4>\n

      For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App<\/a>
      It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.<\/b>
      \"Get<\/a>.<\/p>\n

      Laboratory Equipment<\/h4>\n
        \n
      1. Surface Plate-Granite (24 x 36 inch) 1,2,3,4,7,8,<\/li>\n
      2. Surface roughness Tester (Max Sampling length 0.8 mm) having profile printing facility\t10<\/li>\n
      3. Set of surface roughness standard pieces: Ra (micron) – 0.8 to 50.0, Rz (micron) – 2.5 to 250 including turned, end milled, surface grounded and lapped. 10<\/li>\n
      4. Inductive transducer – measurement range 0 to 100 mm – sensor – inducive (nonlinear) solenoid type onboard with micrometer, micrometer screw gauge assembly for displacement, bridge balance type circuit Display 3.5 digit display\t11<\/li>\n
      5. Sensor – type K (Cr-AI) thermocouple, sensor assembly and water bath with heating arrangement Display 3.5 digit display\t12<\/li>\n
      6. Bourdon tube C type with LVDT Display 3.5 display for Pressure \/ Displacement\t13<\/li>\n
      7. Multidigital Stroboscope cum Tachometer for speed measurement – up to 5000 rpm\t14<\/li>\n
      8. Eddy Current Dynamometer – 250 kW (335 bhp)- Max Power, 1200 Nm (886 lbf.ft) – Max Capacity, 8000 rpm- Max Speed\t15<\/li>\n
      9. Vernier Calipers (0-200 mm) 2<\/li>\n
      10. Vernier Height Gauge and Depth Gauge. (0-300 mm) 2<\/li>\n
      11. Outside Micrometer (0-25 mm, 25-50 mm) 2<\/li>\n
      12. Inside Micrometer (0-25 mm) 2<\/li>\n
      13. Dial indicator (0-25 mm) with magnetic stand\t3,4,7<\/li>\n
      14. Optical flats set range (0.2 mium) Diameter \/ Thickness 45\/12 mm and 60\/15 mm\t5<\/li>\n
      15. Pneumatic comparator unit (Range 0 to 10 bar) 6<\/li>\n
      16. Universal bevel protractor Graduation: 5 min (0-90-0 degrees) 7<\/li>\n
      17. Sine bar, Sine Center (0-200mm) 7<\/li>\n
      18. Slip gauge set of M83 (Measuring Range: 1.001 – 1.009, 1.01- 1.49, 0.5 – 9.5, 10-100) 7<\/li>\n
      19. Screw thread micrometer (Accuracy 0.001-0.006 mm, Dimensions 40 cm x 50 cm x 8 cm) 8<\/li>\n
      20. Profile projector with gear profile \/ Thread profile templates Opaque fine grained ground glass screen with 90 deg, 60 deg, 30 deg cross line Location; fitted with graduated ring (0 to 360 deg) L.C. 1 min; Optics Std 10X, 20X, Measuring Range Std 100mm X 100mm; Opt X axis upto 400 mm, Y axis upto 200 mm; Focusing Travel 100 mm; Magnification Accuracy Contour plusminus 0.05% Surface plusminus 0.05%; Illumination Countor 24V \/ 150W halogen lamp with illumination control; Resolution 0.005\/0.001\/0.0005 mm\t8,9<\/li>\n
      21. Gear Tooth Vernier Caliper (0-25 mm) 9<\/li>\n<\/ol>\n

        Learning Materials<\/h4>\n
          \n
        1. N.V. Raghavendra and L. Krishnamurthy\tEngineering Metrology and Measurement\tOxford University Press, New Delhi, India IS 13: 978-0-19-808549-2. (2013)<\/li>\n
        2. Anand K Bewoor and Vinay A Kulkarni\tMetrology and Measurements\tTata McGraw-Hill Education Private Limited New Delhi, India ISBN (13): 978-0-07-0140 (2017)<\/li>\n
        3. R K Jain\tEngineering Metrology\tKhanna Publication, New Delhi, ISBN-10:817409153X (2022)<\/li>\n
        4. R. K. Rajput\tEngineering Metrology & Instrumentation\tS.K. Kataria and Sons ISBN:9788185749822 (2009)<\/li>\n
        5. R K Jain\tMechanical and Industrial Measurements\tKhanna Publication, New Delhi ISBN: 8174091912 (1995)<\/li>\n
        6. Thomas G. Beckwith, Roy D. Marangoni, John H. Lienhard\tMechanical Measurements\tPearson Prentice Hall ISBN:9780136093763 (2013)<\/li>\n<\/ol>\n

          Learning Websites<\/h4>\n

          For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App<\/a>
          It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.<\/b>
          \"Get<\/a>.<\/p>\n

          For detail Syllabus of all other subjects of Automobile Engineering, K scheme do visit Automobile Engineering 4th Sem Syllabus for K scheme<\/a>.<\/p>\n

          For all Automobile Engineering results, visit MSBTE Automobile Engineering all semester results<\/a> direct links.<\/p>\n","protected":false},"excerpt":{"rendered":"

          Mechanical Measurement detailed Syllabus for Automobile Engineering (AE), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, […]<\/p>\n","protected":false},"author":2351,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"footnotes":""},"categories":[118,128],"tags":[],"class_list":["post-28975","post","type-post","status-publish","format-standard","hentry","category-4th-sem-msbte","category-ae-msbte"],"_links":{"self":[{"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/posts\/28975","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/users\/2351"}],"replies":[{"embeddable":true,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/comments?post=28975"}],"version-history":[{"count":0,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/posts\/28975\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/media?parent=28975"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/categories?post=28975"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/tags?post=28975"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}