{"id":28882,"date":"2025-04-14T11:28:20","date_gmt":"2025-04-14T05:58:20","guid":{"rendered":"https:\/\/www.inspirenignite.com\/mh\/313316-metrology-and-measurement-syllabus-for-production-engineering-3rd-sem-k-scheme-msbte-pdf\/"},"modified":"2025-04-14T11:28:20","modified_gmt":"2025-04-14T05:58:20","slug":"313316-metrology-and-measurement-syllabus-for-production-engineering-3rd-sem-k-scheme-msbte-pdf","status":"publish","type":"post","link":"https:\/\/www.inspirenignite.com\/mh\/313316-metrology-and-measurement-syllabus-for-production-engineering-3rd-sem-k-scheme-msbte-pdf\/","title":{"rendered":"313316: Metrology and Measurement Syllabus for Production Engineering 3rd Sem K Scheme MSBTE PDF"},"content":{"rendered":"

Metrology and Measurement detailed Syllabus for Production Engineering (PG), K scheme PDF has been taken from the MSBTE<\/a> official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical\/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below. <\/p>\n

For all other MSBTE Production Engineering 3rd Sem K Scheme Syllabus PDF, do visit MSBTE Production Engineering 3rd Sem K Scheme Syllabus PDF Subjects<\/a>. The detailed Syllabus for metrology and measurement is as follows.<\/p>\n

Rationale<\/h4>\n

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App<\/a>
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.<\/b>
\"Get<\/a>.<\/p>\n

Course Outcomes:<\/h4>\n

Students will be able to achieve & demonstrate the following COs on completion of course based learning<\/p>\n

    \n
  1. Select relevant linear measuring instrument for measurement.<\/li>\n
  2. Select different gauges and comparators for measurement of given components.<\/li>\n
  3. Use relevant instrument for measurement of different parameters of engineering components.<\/li>\n
  4. Select relevant instrument for measuring the physical parameters of given system.<\/li>\n
  5. Use relevant instrument for measurement of operating parameters of system.<\/li>\n<\/ol>\n

    Unit I<\/h4>\n

    Overview of Metrology and Linear Measurement 1.1 Definition of Metrology, objective and types of Metrology, Need of inspection, Methods of measurements. 1.2 Characteristics of instruments – Static characteristics: Least count (resolution), Range and Span, Accuracy and Precision, Reliability, Calibration, Hysteresis, Dead Zone, Drift, Sensitivity, Threshold, Repeatability, Reproducibility, Linearity, Amplification, Magnification. Dynamic characteristics: Speed of response, Fidelity, Overshoot. 1.3 Standards: Definition and characteristics of Line standard, End standard and Wavelength standard. 1.4\tLinear measuring Instruments: Working principle of Vernier caliper, micrometer, height gauge and depth gauge. 1.5\tTypes of Errors and its sources in Measurements, Factors affecting on accuracy. 1.6\tSelection of instrument, Precautions while using an instrument for getting higher precision and accuracy. Lecture Using Chalk-Board Presentations Video Demonstrations Demonstration\n<\/p>\n

    Unit II<\/h4>\n

    For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App<\/a>
    It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.<\/b>
    \"Get<\/a>.<\/p>\n

    Unit III<\/h4>\n

    Angular, Screw Thread, Gear and Surface Finish Measurements 3.1\tAngle measurement: Instruments used in Angular Measurements: Angle Gauges (No Numerical), Bevel Protractor, sine bar. Principle of Working of Angle Dekkor. 3.2\tScrew thread Measurements: Screw thread terminology, measurement of different elements such as major diameter, minor diameter, effective diameter, pitch, thread angle. Best wire size, Two wire method, Working principle of floating carriage micrometer. 3.3\tGear Measurement: Parkinson Gear tester, Gear tooth Vernier, Profile projector. 3.4\tSurface Roughness Measurement: Meanings of surface texture and definitions, methods of surface measurement -Ra, Rz and RMS values (No Numerical), Principle of Interferometry, Taylors Hobsons Talysurf. 3.5\tCMM: Introduction to Coordinate Measurement Machine (CMM) and its merits. Lecture Using Chalk-Board Presentations Video Demonstrations Demonstration\n<\/p>\n

    Unit IV<\/h4>\n

    Displacement, Temperature and Flow Measurement 4.1\tGeneralized measuring system and its components. 4.2\tTransducers: Classification of transducers- active and passive, contact, non-contact, Mechanical, Electrical, analog, digital. Applications of transducers. 4.3\tDisplacement Measurement: Specification, selection and application of displacement transducer, LVDT, RVDT, Potentiometer. 4.4\tTemperature Measurement: Non-electrical methods-Bimetal and Liquid in glass thermometer. Electrical methods- RTD, Thermistor, Thermocouple. 4.5\tFlow measurement: Types of flow meters. Selection criteria for flow meters. Variable area meter- Rota meter. Vane type Anemometer. Lecture Using Chalk-Board Presentations Video Demonstrations Demonstration\n<\/p>\n

    Unit V<\/h4>\n

    For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App<\/a>
    It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.<\/b>
    \"Get<\/a>.<\/p>\n

    Suggested Micro Project \/ Assignment<\/h4>\n<\/p>\n

    Micro project<\/i><\/p>\n

      \n
    1. Comparative study of various linear measuring instruments like steel rule, Inside-outside micrometer, Vernier caliper and Digital caliper with proper justification.<\/li>\n
    2. Comparative study of surface finish of various samples machined by various machining \/ finishing processes using surface roughness tester.<\/li>\n
    3. Prepare a report on calibration procedure of Vernier Caliper and Micrometer followed by NABL Lab.<\/li>\n
    4. Prepare a visit report on measurement systems used in near by industries \/ SME \/ Workshops \/ Fabrication shops.<\/li>\n
    5. Perform comparative study of different contact and non contact type transducers \/ sensors.<\/li>\n
    6. Visit to Automobile service station, observe the different sensors used in cars and prepare a report of the same.<\/li>\n

      (Name, Use, Location, Working, Applications)\n<\/ol>\n<\/p>\n

      Assignment<\/i><\/p>\n

        \n
      1. Prepare a report to interpret effect of errors on the accuracy of instrument and measurement.<\/li>\n
      2. Visit to any nearby shop or industry and list out different gauges used for inspection along with its purpose.<\/li>\n
      3. Prepare a comparative study of different screw threads measuring instruments on the basis of their least count, accuracy, cost, ease of operation<\/li>\n
      4. Prepare a short report on different types of Rotameter.<\/li>\n
      5. Prepare a set of procedure for sound measurement with suitable instrument.<\/li>\n<\/ol>\n

        Laboratory Equipment<\/h4>\n
          \n
        1. Inductive transducer – measurement range 0 to 100mm – sensor – inducive (nonlinear) solenoid type onboard with micrometer, micrometer screw gauge assembly for displacement, bridge balance type circuit Display 3.5-digit display\t10<\/li>\n
        2. Sensor – type K (Cr-AI) thermocouple, sensor assembly and water bath with heating arrangement Display 3.5-digit display. 11<\/li>\n
        3. Rotameter -Trainer -sensor – standard glass rotameter, process tank with motor pump display – flat position on graduated scale. 12<\/li>\n
        4. Load cell – Force measurement range 5-50N – sensor 4 arm bridge with strain gauge capacity – 2Kg 3.5-digit display\t13<\/li>\n
        5. Sound level meter: Measuring range 30-130 dB, portable and easy to use\t14<\/li>\n
        6. Multi digital Stroboscope cum Tachometer for speed measurement – up to 5000 rpm. 15<\/li>\n
        7. Vernier Calipers (0-200 mm) 2<\/li>\n
        8. Vernier Height Gauge and Depth Gauge. (0-300 mm) 2<\/li>\n
        9. Outside Micrometer (0-25mm, 25-50mm) 2<\/li>\n
        10. Inside Micrometer 0-25mm\t2<\/li>\n
        11. Surface Plate-Granite (24 x 36 inch) 2,4,7<\/li>\n
        12. Dial indicator (0-25mm) with magnetic stand. 3,4<\/li>\n
        13. Universal bevel protractor Graduation: 5 min (0 deg-90 deg -0 deg) 4<\/li>\n
        14. Sine bar, Sine Center (0-200mm) 0<\/li>\n
        15. Floating Carriage Micrometer: Least Count 0.001mm; Standard micrometer or electronic type; Non rotary 8mm micrometer spindle; Indicator with 0.001 standard dial; admit between center 200mm; Max diameter capacity 100mm; Standard accuracy \u00c2\u00b1 0.005mm. 5<\/li>\n
        16. Profile projector with gear profile \/ Thread profile templates. Opaque fine grained ground glass screen with 90o, 60o, 30o cross line Location; fitted with graduated ring (0 to 360 o) L.C. 1 min; Optics Std 10X, 20X, Measuring Range Std 100mm X 100mm; opt X axis up to 400mm, Y axis up to 200mm; Focusing Travel 100mm; Magnification Accuracy Contour \u00c2\u00b1 0.05% Surface \u00c2\u00b1 0.05%; Illumination Countor 24V \/ 150W halogen lamp with illumination control; Resolution 0.005\/0.001\/0.0005 mm. 5,6<\/li>\n
        17. Surface roughness Tester (Max Sampling length 0.8 mm) having profile printing facility. 7<\/li>\n
        18. Optical flats set range (0.2 \u00c2\u00b5m) Diameter \/ Thickness 45\/12mm and 60\/15mm. 8<\/li>\n
        19. Angle Dekkor and Autocollimator (0 to 30′) 9<\/li>\n<\/ol>\n

          Learning Materials \/ Books<\/h4>\n

          For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App<\/a>
          It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.<\/b>
          \"Get<\/a>.<\/p>\n

          Learning Webistes & Portals<\/h4>\n
            \n
          1. https:\/\/onlinecourses.nptel.ac.in\/noc20_me94\/preview\t\tNPTEL MOOCS course on Engineering Metrology<\/li>\n
          2. https:\/\/onlinecourses.nptel.ac.in\/noc23_me09\/preview\t\tNPTEL MOOCS course on Mechanical measurement systems.<\/li>\n
          3. https:\/\/www.youtube.com\/watch?v=Hi7NUJdznc0\t\tVideo Lecture on Engineering Metrology by IIT Madras.<\/li>\n
          4. http:\/\/www.digimat.in\/nptel\/courses\/video\/112106179\/L33.html\t\tVideo Lecture on Electrical and electronic comparators, Optical comparators NPTEL Video Course : Metrology<\/li>\n
          5. https:\/\/www.bing.com\/videos\/riverview\/relatedvideo?&q=videos +on+CMM+measurement+IIT&&mid=6C0843737C0E8F2019006C0843737C0 E8F201900&&FORM=VRDGAR\t\tVideo on Part inspection by using CMM<\/li>\n
          6. https:\/\/www.bing.com\/videos\/riverview\/relatedvideo?q=videos+ on+screw+thread+measurement+IIT&&view=riverview&mmscn=mtsc&m id=9850B2C61C0872810AC19850B2C61C0872810AC1&&aps=196&FORM=VM SOVR\t\tMeasurement of screw thread elements.<\/li>\n
          7. https:\/\/www.bing.com\/videos\/riverview\/relatedvideo?&q=videos +on+displacement+measurement&&mid=53BAFCB5E8DA5553247253BAFC B5E8DA55532472&&FORM=VRDGAR\tPotentiometer Working Principle<\/li>\n
          8. https:\/\/www.bing.com\/videos\/riverview\/relatedvideo?&q=bimeta llic+temperature+measurement+devices&&mid=3ADB81DF5F95342EE5 B53ADB81DF5F95342EE5B5&&FORM=VRDGAR\tHow Bimetallic Temperature Gauges Works<\/li>\n
          9. https:\/\/www.bing.com\/videos\/riverview\/relatedvideo?&q=flow+m easurement+devices+rotameter&&mid=145B5C41696FC6AFF30B145B5C 41696FC6AFF30B&&FORM=VRDGAR\tFlow Measurement Devices<\/li>\n
          10. https:\/\/www.bing.com\/videos\/riverview\/relatedvideo?&q=carbon +microphone&&mid=B08AB66B421E46892B46B08AB66B421E46892B46&&F ORM=VRDGAR\tBuild a carbon microphone with a soda can and a paper clip<\/li>\n
          11. https:\/\/www.bing.com\/videos\/riverview\/relatedvideo?&q=hair+h ygrometer+working+principle&&mid=20C836F03B5418F173D620C836F 03B5418F173D6&&FORM=VRDGAR\tActual working of Hair Hygrometer<\/li>\n<\/li>\n<\/ol>\n

            For detail Syllabus of all other subjects of Production Engineering, K scheme do visit Production Engineering 3rd Sem Syllabus for K scheme<\/a>.<\/p>\n

            For all Production Engineering results, visit MSBTE Production Engineering all semester results<\/a> direct links.<\/p>\n","protected":false},"excerpt":{"rendered":"

            Metrology and Measurement detailed Syllabus for Production Engineering (PG), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject […]<\/p>\n","protected":false},"author":2351,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"footnotes":""},"categories":[117,167],"tags":[],"class_list":["post-28882","post","type-post","status-publish","format-standard","hentry","category-3rd-sem-msbte","category-pg-msbte"],"_links":{"self":[{"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/posts\/28882","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/users\/2351"}],"replies":[{"embeddable":true,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/comments?post=28882"}],"version-history":[{"count":0,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/posts\/28882\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/media?parent=28882"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/categories?post=28882"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.inspirenignite.com\/mh\/wp-json\/wp\/v2\/tags?post=28882"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}