Energy Audit and Management detailed syllabus scheme for Biomedical Engineering (BM), 2019 regulation has been taken from the MU official website and presented for the Bachelor of Engineering students. For Course Code, Course Title, Test 1, Test 2, Avg, End Sem Exam, Team Work, Practical, Oral, Total, and other information, do visit full semester subjects post given below.
For 7th Sem Scheme of Biomedical Engineering (BM), 2019 Pattern, do visit BM 7th Sem Scheme, 2019 Pattern. For the Institute Level Optional Course-1 scheme of 7th Sem 2019 regulation, refer to BM 7th Sem Institute Level Optional Course-1 Scheme 2019 Pattern. The detail syllabus for energy audit and management is as follows.
Energy Audit and Management Syllabus for Biomedical Engineering BE 7th Sem 2019 Pattern Mumbai University
Course Objectives:
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.
Course Outcomes:
Learner will be able to
- To identify and describe present state of energy security and its importance.
- To identify and describe the basic principles and methodologies adopted in energy audit of an utility.
- To describe the energy performance evaluation of some common electrical installations and identify the energy saving opportunities.
- To describe the energy performance evaluation of some common thermal installations and identify the energy saving opportunities
- To analyze the data collected during performance evaluation and recommend energy saving measures
Module 1
Energy Scenario: Present Energy Scenario, Energy Pricing, Energy Sector Reforms, Energy Security, Energy Conservation and its Importance, Energy Conservation Act-2001 and its Features. Basics of Energy and its various forms, Material and Energy balance 04
Module 2
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Module 3
Energy Management and Energy Conservation in Electrical System: Electricity billing, Electrical load management and maximum demand Control; Power factor improvement, Energy efficient equipments and appliances, star ratings. Energy efficiency measures in lighting system, Lighting control: Occupancy sensors, daylight integration, and use of intelligent controllers. Energy conservation opportunities in: water pumps, industrial drives, induction motors, motor retrofitting, soft starters, variable speed drives. 10
Module 4
Energy Management and Energy Conservation in Thermal Systems: Review of different thermal loads; Energy conservation opportunities in: Steam distribution system, Assessment of steam distribution losses, Steam leakages, Steam trapping, Condensate and flash steam recovery system. General fuel economy measures in Boilers and furnaces, Waste heat recovery, use of insulation- types and application. HVAC system: Coefficient of performance, Capacity, factors affecting Refrigeration and Air Conditioning system performance and savings opportunities. 10
Module 5
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Module 6
Energy conservation in Buildings: Energy Conservation Building Codes (ECBC): Green Building, LEED rating, Application of Non-Conventional and Renewable Energy Sources 03
Assessment:
Assessment consists of two tests out of which; one should be compulsory class test (on minimum 02 Modules) and the other is either a class test or assignment on live problems or course project.
Reference Books:
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Theory Examination:
Some guidelines for setting the question papers are as, six questions to be set each of 20 marks, out of these any four questions to be attempted by students. Minimum 80% syllabus should be covered in question papers of end semester examination. In question paper weightage of each module will be proportional to number of respective lecture hours as mention in the syllabus.
- Question paper will comprise of total six question
- All question carry equal marks
- Questions will be mixed in nature (for example supposed Q.2 has part
- from module 3 then part
- will be from any module other than module 3)
- Only Four question need to be solved.
For detail Syllabus of all subjects of Biomedical Engineering (BM) 7th Sem 2019 regulation, visit BM 7th Sem Subjects of 2019 Pattern.