AEDLO5011: Press Tool Design Syllabus for AE 5th Sem 2018 Pattern Mumbai University (Department Level Optional Course-1)

Press Tool Design detailed syllabus scheme for Automobile Engineering (AE), 2018 regulation has been taken from the MU official website and presented for the Bachelor of Engineering students. For Course Code, Course Title, Test 1, Test 2, Avg, End Sem Exam, Team Work, Practical, Oral, Total, and other information, do visit full semester subjects post given below.

For 5th Sem Scheme of Automobile Engineering (AE), 2018 Pattern, do visit AE 5th Sem Scheme, 2018 Pattern. For the Department Level Optional Course-1 scheme of 5th Sem 2018 regulation, refer to AE 5th Sem Department Level Optional Course-1 Scheme 2018 Pattern. The detail syllabus for press tool design is as follows.

Press Tool Design Syllabus for Automobile Engineering TE 5th Sem 2018 Pattern Mumbai University

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Introduction to Press Working –

1. Classification of common Press working operations, Benefits and limitations of using Press tools. Applications of pressed parts/components.
2. Theory of Shearing in Press Working. Optimum Cutting clearance & its effect on tolerances of pressed components. Construction of Basic shearing die. Functions of different elements of a press tool. Methods of feeding the strip/coil material. 08

Module 2

Design and Calculations of Piercing & Blanking Die-

1. Calculations for Economic Strip Layout, Calculations of Cutting force and Stripping force, Recommending minimum tonnage of a press. Centre of Pressure (its importance and calculation)
2. Design aspects of Press tool elements viz. Punches & methods of retaining punches, Die block, Stripper, Pilot, etc. Methods of reducing cutting loads on press tools
3. Different types Die sets and its selection 14

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Bending and Drawing-

1. Theory of Bending, Spring back and measures to control it, Calculations for Blank development of Simple Bent components, Minimum bend radius, Types of Bending dies
2. Theory of Drawing, Metal flow in Drawing & forming operations; reduction ratio and redrawing limits, draw clearance, drawing and blank holding forces for cylindrical draws only. Blank development of Cup
3. Defects in drawn as well as bent parts, Presses selection for drawing/forming operations
4. Basic construction and working of Bending and Drawing dies 12

Module 5

1. Miscellaneous Dies- Basic construction & working of Shaving dies, Trimming dies,Compound dies, Combination dies, Coining dies, Embossing dies, Simple Progressive & Compound Progressive dies 05

Module 6

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Assessment:

Internal Assessment for 20 marks: Consisting Two Compulsory Class Tests First test based onapproximately 40% of contents and second test based on remainingcontents (approximately 40% but excluding contents covered in Test I) End Semester Examination: Weightage of each module in end semester examination will be proportional to number of respective lecture hours mentioned in the curriculum.

1. Question paper will comprise of total six questions, each carrying 20 marks
2. Question 1 will be compulsory and should cover maximum contents of the curriculum
3. Remaining questions will be mixed in nature (for example if Q.2 has part
   1. from module 3 then part
   2. will be from any module other than module 3)
4. Only Four questions need to be solved.

Reference Books:

1. Die Design Fundamentals by J. R. Paquin, Industrial Press
2. Techniques of Press Working Sheet Metal by D F Earyand E A Reed
3. Press Tools Design and Construction by P H Joshi, S Chand Publishing
4. Tool Design by C. Donaldson and V C Goold, TMH
5. Production Engineering by P. C. Sharma, S Chand Publishing
6. Metal working ASM Handbook

For detail Syllabus of all subjects of Automobile Engineering (AE) 5th Sem 2018 regulation, visit AE 5th Sem Subjects of 2018 Pattern.