Chemical Technology for Paint Industries detailed Syllabus for Surface Coating Technology (SC), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below.
For all other MSBTE Surface Coating Technology 5th Sem K Scheme Syllabus PDF, do visit MSBTE Surface Coating Technology 5th Sem K Scheme Syllabus PDF Subjects. The detailed Syllabus for chemical technology for paint industries is as follows.
Rationale
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.
Course Outcomes:
Students will be able to achieve & demonstrate the following COs on completion of course based learning
- Use flow measuring devices.
- Select relevant fluid handling devices for the paint industry.
- Apply heat transfer principles in the paint industry.
- Explain processes filter and dryer for the paint industry.
- Select crusher and screens in the paint industry.
Unit I
Fluid flow 1.1 Introduction to fluid flow. 1.2 Concept of Reynold’s number. 1.3 Classification of fluid flow: Laminar and Turbulent flow Compressible and Incompressible flow. 1.4 Construction and working of Orifice meter, Venturi meter and Rotameter. 1.5 Concept of Digital Flow Meter.
Suggested Learning Pedagogie
Lecture Input-cum-discussion Demonstration Assignment
Unit II
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Unit III
Heat transfer 3.1 Principles of heat transfer modes. 3.2 Construction and working of U-tube, shell and tube, condenser type heat exchanger. 3.3 Applications of heat exchangers. 3.4 Introduction to various types of distillation processes. 3.5 Applications of distillation in industries. Input/ cum discussion
Suggested Learning Pedagogie
Presentations Demonstration Presentations
Unit IV
Filtration and Drying 4.1 Introduction to filtration and drying operation 4.2 Construction and working of filter press, continuous rotary and vacuum filter. 4.3 Construction and working of tray dryer, rotary drum dryer and spray dryer. 4.4 Application of filtration and drying.
Suggested Learning Pedagogie
Lecture Using ChalkBoard Video Demonstrations Presentations
Unit V
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
List of Experiments:
- Survey of flow meters in laboratory.
- Identify flow of fluid (Laminar or Turbulent) using visual observation.
- *Compare rate of sedimentation in different density fluids.
- *Check working mechanism of centrifugal pump.
- Identify various components/parts of reciprocating pump.
- *Classify various valves based on given criteria.
- Measure heat transfer rate of various metals rods.
- *Evaluate convection mode of heat transfer.
- Perform simple distillation for solvent separation.
- Determination of effect of temperature on viscosity using oils/resin/paint.
- * Calculate percentage volatile matter by using ‘tray dryer’.
- *Perform filtration for separation of solid liquid mixture.
- Conduct vacuum filtration for separation of solid liquid mixture.
- Use centrifuge method for separation of solid-liquid mixture.
- *Determine percentage of oversize and undersize particles by using sieve analysis method.
- Apply Impact mechanism for reducing the particle size of material and check particle size.
- Use ball mill for dry powder synthesis.
Self Learning
Micro Project
- Only one micro-project is planned to be undertaken by a student that needs to be assigned to him/her in the beginning of the semester. In the first four semesters, the micro-project is group-based. However, in the fifth and sixth semesters, it should be preferably being individually undertaken to build up the skill and confidence in every student to become problem solver so that s/he contributes to the projects of the industry. In special situations where groups have to be formed for micro-projects, the number of students in the group should not exceed three. The micro-project could be industry application-based, internet-based, workshop-based, laboratory-based or field-based. Each micro-project should encompass two or more COs which are in fact, an integration of PrOs, UOs and ADOs. Each student will have to maintain dated work diary consisting of individual contribution in the project work and give a seminar presentation of it before submission. The total duration of the micro-project should not be less than 16 (sixteen) student engagement hours during the course. The student ought to submit micro-project by the end of the semester to develop the industry-oriented COs. A suggestive list of micro-projects is given here. Similar micro-projects could be added by the concerned faculty:
- Prepare a report on advanced/digital flow measuring devices.
- Prepare a report on calibration techniques of flow measuring devices.
- Prepare an album on various valves used in the paint industry.
- Collect information on various pumps.
- Collect information on various heat exchangers used in the paint industry.
- Prepare a report on various distillation methods.
- Collect information on the latest trends in filtration techniques.
- Prepare a report on new techniques in drying.
- Make a market survey on Heat exchanger/Dryer/ Filter etc manufacturer
- Prepare a report on characterization of various equipment like Dryers, filters, Heat exchangers, screens, size reduction equipment etc.
- Collect information on advanced size reduction equipment.
- Collect information on advanced size separation techniques.
Assignment
- Prepare an album for flow measuring devices.
- Search various heat exchanger manufacturer in India and prepare a report
- Write advanced techniques in filtration and drying.
- Visit pump manufacturing industry and draw flow diagram for manufacturing plant.
Term Work
- Prepare a journal consisting: a. List of laboratory experiences given. b. For each practical perform write (Scope, chemicals, instruments, process, observations, diagram, calculations and result etc.) c. Arrange (b) chronologically (date wise) d. Prepare report for submission
Laboratory Equipment
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Learning Materials
- J M Coulson & J F Richardson Chemical Engineering Vol-I (6th Edition) Replica press Pvt. Ltd, 2000 ISBN: 0750644443
- J M Coulson & J F Richardson Chemical Engineering Vol-II (4th Edition) Asian Books Private Limited. ISBN: 081-86299-11-4
- Kenneth A. Solen & John N. Harb Introduction to Chemical Engineering (5th Edition) John Wiley & Sons, Inc. ISBN: 978-0-470-88572-7
- Unit operations of Chemical Engineering (5th Edition) Unit operations of Chemical Engineering (5th Edition) McGraw-Hill publication, 1993 ISBN: 0-07-112738-0
- Alan J. Chapman Heat Transfer PEARSON INDIA ISBN : 9332575061
- Erich Krell Handbook of Laboratory Distillation Elsevier Science ISBN : 0444556400
- C.L.Prasher Crushing and Grinding Process Handbook Wiley ISBN : 047110535X
- Brian Nesbitt Handbook of Pumps and Pumping Elsevier Science -0080549217
- Brian Nesbitt Handbook of Valves and Actuators Elsevier Science-0080549284
- Trevor Sparks, George Chase Filters and Filtration Handbook Butterworth-Heinemann Ltd-9780080993966
Learning Websites
- https://www.youtube.com/watch?v=wlPXZrP9vR8 Introduction to flow of fluid
- https://www.youtube.com/watch?v=gByrUkZUnKo Flow measurement
- https://www.youtube.com/watch?v=oINBqDpvSIc Venturimeter & derive equation of discharge
- https://www.youtube.com/watch?v=1wNmtle6qkE Reynolds Number – Laminar and Turbulent Flow
- https://www.youtube.com/watch?v=JrjTRKBtYgw Types of Fluid Flow | Fluid Mechanics & Machineries
- vhttps://www.youtube.com/watch?v=wsm5zzsBI4s Pumps Types
- vhttps://www.youtube.com/watch?v=XxAhrF7KZuE Types of valves used in pumping
- https://www.youtube.com/watch?v=HxpzoDJeYwI Centrifugal pump construction and working
- https://www.youtube.com/watch?v=_5AZwrTkQNA Introduction to heat
- https://www.youtube.com/watch?v=OdwrxKRSjEU Modes of heat transfer
- https://www.youtube.com/watch?v=OyQ3SaU4KKU Shell and tube heat exchanger
- https://www.youtube.com/watch?v=QXy_Cn6KIPs Distillation process
- https://www.youtube.com/watch?v=par3tAK7VLg Fraction distillation
- https://www.youtube.com/watch?v=Fh9Bkzr2-5A Vacuum distillation
- https://www.youtube.com/watch?v=wRB_6qbYmiQ Drying
- https://www.youtube.com/watch?v=1XeTr5NLNTc Filtration
- https://www.youtube.com/watch?v=KD7gxIclilQ Filtration equipment
- https://www.youtube.com/watch?v=uOv5PFy4s2c Tray dryer, Rotary dryer
- https://www.youtube.com/watch?v=1Zcp2cbbvvE Mixing
- https://www.youtube.com/watch?v=gG3QvzCqw6M Size reduction mill
- https://www.youtube.com/watch?v=vrvXDpmpVHY Size reduction
For detail Syllabus of all other subjects of Surface Coating Technology, K scheme do visit Surface Coating Technology 5th Sem Syllabus for K scheme.
For all Surface Coating Technology results, visit MSBTE Surface Coating Technology all semester results direct links.