Advanced Resin Technology detailed Syllabus for Surface Coating Technology (SC), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below.
For all other MSBTE Surface Coating Technology 2nd Sem K Scheme Syllabus PDF, do visit MSBTE Surface Coating Technology 2nd Sem K Scheme Syllabus PDF Subjects. The detailed Syllabus for advanced resin technology is as follows.
Rationale
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.
Course Outcomes:
Students will be able to achieve & demonstrate the following COs on completion of course based learning
- Write manufacturing process of acrylic resin.
- Explain curing reaction of epoxy resin.
- Test polyamide resin.
- Draw chemical structure of isocyanate.
- State applications of silicon resin.
Unit I
Acrylic Resin 1.1 Introduction to acrylic resin. 1.2 Classification of acrylic resins. 1.3 Raw materials for acrylic resins. 1.4 Manufacturing reactions of acrylic resins. 1.5 Manufacturing Techniques of acrylic resins. 1.6 Cross linking reactions of acrylic resins. 1.7 Properties and application of acrylic resins. 1.8 Introduction to VAM, Pure acrylic emulsion, styrenated emulsion Lecture Demonstration Assignment Seminar PPTs2 TLO 2.1 Calculate “n” value of epoxy resins.
Unit II
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Unit III
Polyamide Resin 3.1 Classification of polyamide resins. 3.2 Raw materials of polyamide resins. 3.3 Introduction to amine adduct. 3.4 Manufacturing reactions of polyamide resins. 3.5 Manufacturing process for polyamide resins. 3.6 Curing reactions of polyamide resins. 3.7 Properties and applications of polyamide resin.
Suggested Learning Pedagogy Lecture Demonstration Presentations Chalk-Board Flipped Classroom
Unit IV
Polyurethane Resin 4.1 Introduction to polyurethane resins. 4.2 Raw materials for polyurethane resins. 4.3 Reaction of Isocyanate. 4.4 Types of polyurethane resins. 4.5 Crosslinking reactions of polyurethane resins. 4.6 Properties and application of polyurethane resins.
Suggested Learning Pedagogy Lecture Presentations Chalk-Board Demonstration Collaborative learning
Unit V
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Practical / Tutorial Experiences
- Determination of acid value of acrylic resins using KOH solution.*
- Determination of hydroxyl value of acrylic resins.
- Determination of viscosity of acrylic resin by flow cup method.*
- Testing of solvent tolerance of acrylic resins sample.
- Determination of Epoxy equivalent of epoxy resins.*
- Determination of percentage nonvolatile matter/volatile matter of epoxy resin.
- Testing of compatibility of epoxy resin with other resins.*
- Testing of Salt spray resistance of epoxypolyamide resin system.
- Determination of amine value of polyamides.*
- Determination of the pot life of epoxy polyamide resin system.*
- Testing of Chemical resistance of epoxypolyamide resin system:
- Determination of percentage ” – NCO” content.*
- Testing of Chemical resistance of acrylic Polyurethane resin system
- Testing of Solvent resistance of acrylic Polyurethane resin system
- Testing of Heat resistance of silicon resin film.*
- Testing of Solvent tolerance of silicone resin
- Determination of compatibility of silicon resin with other resins.
Note : Out of above suggestive LLOs – ‘*’ Marked Practicals (LLOs) Are mandatory. Minimum 80% of above list of lab experiment are to be performed. Judicial mix of LLOs are to be performed to achieve desired outcomes.
Laboratory Equipment / Software Required
- Test tubes (15 ml capacity) All
- Measuring Cylinders (10 ml, 50ml 100ml) All
- Beakers (50, 100, 250 ml) All
- Burette (50ml, L.C.: 0.1 ml) 1,2,5,9,12
- Conical Flasks (100 ml, 250 ml) 1,2,5,9,12
- Volumetric flask (100, 250, 500 ml) 1,2,5,9,12
- Pipette (10 ml, 25 ml) 1,2,5,9,12
- Glass rod (6 mm/10 mm) All
- Weighing Balance (Digital Display, 300 g, Sensitivity. 0.01 g) All
- Petri Dish (size-3″) 6
- Ovens (Max temp-250oC) 6,8,11,13,15
- Flow Cup B-4 3
- Stop Watch (Analogue) 3
- Spirit Level 3
- Metal Panels (MS panel, 75*100*0.8mm) 8,11,13,14,15
- Brush (Soft Brush, 1″ rectangular) 8,11,13,14,15
- Salt spray chamber 8
Learning Materials / Books
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Learning Websites & Portals
- https://youtu.be/YVfRzSlBwwY? si=dKAj44yNexM6XAEI Acrylic resin reactor
- https://youtu.be/EyGfRi5dkdg?si=OANRqFcvWm7Hmrs_ Reactor for resin
- https://youtu.be/DaKf7CQu6IQ?si=riOXOposkr7x5z47 Acrylic emulsion
- https://youtu.be/cQEz7UjWliY?si=0OOfSfXFjgL6o1GC Epoxy resin plant
- https://youtu.be/eXvOma44cBI?si=pkcCkeXL19ArtSuY Resin Plant
- https://youtu.be/s6qPo84herU?si=5jBUgyAvLHL11ro9 Epoxy resin reaction
- https://youtu.be/ufmLsE5hp6Y?si=ZWAaOzcii4m3Atfl reactions of epoxy resin
- https://youtu.be/kTxr4Z4mwj0?si=ZaqFFpgWxkQbovT3 Epoxy vs Polyurethane
- https://youtu.be/kTxr4Z4mwj0?si=ZaqFFpgWxkQbovT3 Preparation of epoxy
- https://youtu.be/ur3kdchsVDk?si=XUwHVkMjZkgX_yad Photoconducting polymers
- https://youtu.be/0T_2c7G7XaI?si=i_-w84jwPlaLiP7k Mechanism of epoxy
- https://youtu.be/tuRjaJdDLdQ?si=CWGLQvGj44UjwK-C Polyamide resin
- https://youtu.be/nhs947JrrnU?si=g2KpMdpff0aItMDy Effects of Different Isocyanates on Polyurethanes
- https://youtu.be/Sx7cjRjkZvU?si=D5NyX1q_DtrEU9kP Preparation of silicone
- https://youtu.be/WOArkEVsZCw? si=PRNGnA8CQB7sONfg Polymer cross linking
For detail Syllabus of all other subjects of Surface Coating Technology, K scheme do visit Surface Coating Technology 2nd Sem Syllabus for K scheme.
For all Surface Coating Technology results, visit MSBTE Surface Coating Technology all semester results direct links.