Engineering in Printing Machines detailed Syllabus for Printing Technology (PN), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below.
For all other MSBTE Printing Technology 2nd Sem K Scheme Syllabus PDF, do visit MSBTE Printing Technology 2nd Sem K Scheme Syllabus PDF Subjects. The detailed Syllabus for engineering in printing machines is as follows.
Rationale
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.
Course Outcomes:
Students will be able to achieve & demonstrate the following COs on completion of course based learning
- Identify different electrical/electronic products and machinery.
- Connect electric motors for specific requirements.
- Identify and understand principles of electronic components.
- Use simple PLC programming tools.
- Use relevant electric/electronic components safely.
Unit I
Electrical Circuits 1.1 Definition and Units : EMF, M.M.F, Current, Potential Difference, Power and Energy. 1.2 AC and DC in resistor, induction, capacitors. Introduction to 3-phase signal.
Suggested Learning Pedagogy Chalk-Board Demonstration Hands-on
Unit II
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Unit III
Electronic Components 3.1 Active and passive components; Resistor, capacitor, inductor, symbols, color codes, specifications. 3.2 Voltage and current sources, signals: waveform (sinusoidal, triangular and square), time and frequency domain representation, amplitude, frequency, phase, wavelength 3.3 Introduction to digital electronics, gates, combinational and sequential circuits.
Suggested Learning Pedagogy Demonstration Chalk-Board Hands-on
Unit IV
Programmable Logic Controllers 4.1 Introduction to PLC, Block diagram, Types of PLC – Modular and fixed, 4.2 Basics of Input / Output Modules, Applications of PLC 4.3 Introduction to Ladder Programming and Simple Ladder Programs
Suggested Learning Pedagogy Chalk-Board Demonstration Hands-on
Unit V
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Practical / Tutorial Experiences
- Use digital multimeter to measure voltage, current, resistance, continuity in circuit and test diode.*
- Perform basic electrical wiring connections, switches, MCBs, Sockets, for given application.*
- Measure, voltage, current and power in 1-phase circuit with resistive load.
- Make Star and Delta connection in induction motor starters and measure the line and phase values.
- Verify the working and troubleshooting of servo motor.*
- Connect resistors in series and parallel combination on bread board and measure resistance, current and voltage using digital multimeter.*
- Connect capacitors in series and parallel combination on bread board and measure its value using multimeter.
- Calculate the value of given resistor using color code method and verify using digital multimeter.*
- Simulate simple ladder program using PLC.
- Simulate simple relay program using PLC.
- Test and verify the operation of photodiode or any photosensor.*
- Test and verify the operation of any one proximity sensor.
- Test and verify the operation of full wave rectifier.*
- Verify the operation and characteristics of photodiode.*
- Test and verify the operation of basic gates using IC
Note : Out of above suggestive LLOs – ‘*’ Marked Practicals (LLOs) Are mandatory. Minimum 80% of above list of lab experiment are to be performed. Judicial mix of LLOs are to be performed to achieve desired outcomes.
Micro Project / Self Learning
Micro project
- Electric and magnetic circuit: Each batch will prepare a coil without core. Students will note the deflection of galvanometer connected across the coil for: movement of the North Pole of permanent magnet towards and away from the coil (slow and fast movement), movement of the South Pole of permanent magnet towards and away from the coil (slow and fast movement). Students will demonstrate and prepare a report based on their observations.
- Single phase induction motor: Each batch will select a three-phase squirrel cage type induction motor for a particular application (assume suitable rating). They will visit local electrical market (if the market is not nearby you may use the Internet) and prepare a report based on the following points: i. Manufactures, ii. Technical specifications iii. Features offered by different manufacturers iv. Price range
- Transistor as a switch: Each batch (3-4 students) will search and study datasheet of transistor and relevant component and will build / test transistor switch circuit on breadboard/General purpose PCB for various input signal.
- Prepare display boards consisting of electronic components: Each batch (3-4 students) will prepare display boards/ models/ charts/ Posters to visualize the appearance of electronic active and passive components.
- Diode: Build a circuit on general purpose PCB to clamp a waveform at 3.0V using diode and passive components.
Assignment
- Make star delta connections of motor
- Connect the various meters to measure the current and voltage of induction motor.
- Conduct a market survey, interpret the name plate ratings, and identify the parts of an induction motor.
- Search for the commonly used PLCs in Industry and prepare a report which includes specifications, features, cost, etc.
Note : A suggestive list is provided, this may vary according to need of the course curriculum.
Laboratory Equipment / Software Required
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Learning Materials / Books
- Mittie and Mittal Basic Electrical Engineering McGraw Education, New Delhi, 2015, ISBN: 978-007-0088572-5
- Saxena S. B. Lal Fundamentals of Electrical Engineering Cambridge University Press, latest edition ISBN: 9781107464353
- Theraja B. L. Electrical Technology Vol – I and Vol – ii S. Chand publications, New Delhi, 2015, ISBN: 9788121924405, ISBN-13: 978-8121927833
- Malvina, Albert Paul, David Electronics Principles McGraw Hill Education, New Delhi, 2015, ISBN-13: 978-0070634244
- Prof. V. R. Jadhav Programmable Logic Controller Khanna Publication 2012 9788174092281
- Theraja B.L., Sedha R.S. Principles of Electronic Devices and Circuits S Chand & Company ISBN-8121921996
Learning Websites & Portals
- http://www.electronicsclub.info/ This website provides simple and clear explanations of electronics and electrical concepts.
- https://www.allaboutcircuits.com/ This website provides comprehensive information and tutorials on various electrical and electronics
- http://www.electronics-tutorials.ws/ Electronics Tutorials offers a variety of tutorials and articles covering fundamental electrical con
- https://www.learnelectronics.org/ This site provides practical electronics tutorials with a focus on hands-on learning, making it a gr
- https://learn.sparkfun.com/tutorials SparkFun offers a variety of tutorials on electronics, sensors, and microcontrollers.
- https://www.electronicshub.org/ Electronics Hub is a resource for electronics enthusiasts. It offers articles, tutorials, and projec
- https://ocw.mit.edu/courses/electrical-engineering-and-compu ter-science/6-002-circuits-and-electron MIT’s OpenCourseWare provides free access to their course materials. This link is specifically for a
- LTspice LTspice is a powerful, free electronic circuit simulator that allows students to design, test, and s
- Multisim Multisim, part of the National Instruments suite, is a popular electronics simulation software that
- Electronics Toolkit (Mobile App) This mobile app, available for both Android and iOS, provides a collection of calculators and tools
- LabVIEW LabVIEW, also from National Instruments, is used for teaching control and measurement systems. It ca
- QUCS (Quite Universal Circuit Simulator) QUCS is an open-source electronics circuit simulator that can be used to design and simulate various
For detail Syllabus of all other subjects of Printing Technology, K scheme do visit Printing Technology 2nd Sem Syllabus for K scheme.
For all Printing Technology results, visit MSBTE Printing Technology all semester results direct links.