315378: Automobile Testing and Validation Syllabus for Mechanical Engineering 5th Sem K Scheme MSBTE PDF

Automobile Testing and Validation detailed Syllabus for Mechanical Engineering (ME), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below.

For all other MSBTE Mechanical Engineering 5th Sem K Scheme Syllabus PDF, do visit MSBTE Mechanical Engineering 5th Sem K Scheme Syllabus PDF Subjects. The detailed Syllabus for automobile testing and validation is as follows.

Rationale

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Course Outcomes:

Students will be able to achieve & demonstrate the following COs on completion of course based learning

1. Apply vehicle testing standards for validation and homologation.
2. Select appropriate vehicle-level tests for various types
3. Perform test of vehicle on test tracks.
4. Use chassis dynamometer for vehicle testing.
5. Interpret NCAP rating for comfort and safety of passengers.

Unit I

Vehicle Testing and Homologation 1.1 Overview of Vehicle Testing – Need and importance of vehicle testing and homologation. 1.2 Basis of tests – Driving cycles, Homologation 1.3 Requirements of test – a) Test equipments, b) Procedure, c) Quality Personnel. 1.4 Testing instruments and equipments: Use, Capabilities and Parameters measured by – Engine dynamometer, Compression tester, Stroboscope, Petrol/Diesel engine scanner, Exhaust gas analyzer, Diesel smoke meter, Vacuum tester, Chassis dynamometer. 1.5 Testing standards – a) SAE standards, b) ASMT standards, c) ARAI standards, d) CMVI regulations. 1.6 Significance of test. 1.7 Production part approval process.

Suggested Learning Pedagogie
Chalk-Board Flipped Classroom Video Demonstrations Presentations

Unit II

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit III

Road and Track Testing 3.1 Testing of Vehicles on road: Introduction of sampling technique. 3.2 Vehicle level performance test: a) Acceleration, b) Driveability, c) Gradeability, d) Restartability, e) Brakes testing, f) Steering effort Testing, g) Speedometer and odometer testing. 3.3 Accelerated endurance testing procedures: Torture tracks – Belgian Pave, Corrugated, Long wave pitching, Pot hole, Sand patch, Mud patch, Steering pad, High speed, Serpentine courses, Gradient, Shallow water trough, Deep wading trough, Cross Country, Step Climbing. 3.4 Draw bar or winch pull test.

Suggested Learning Pedagogie
Lecture Using Chalk-Board Video Demonstrations Presentations Flipped Classroom

Unit IV

Vehicle Testing on Chassis Dynamometers 4.1 Two wheeler and four wheeler dynamometers: Construction and working. 4.2 Vehicle testing lanes: Side slip testers, wheel alignment testing, wheel balancing, brake test, head light alignment and light intensity testing.

Suggested Learning Pedagogie
Lecture Using Chalk-Board Video Demonstrations Presentations Site/Industry Visit

Unit V

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

List of Experiments:

1. * Vehicle testing and homologation process
2. Approval of Component/System/Vehicle from Concerned Organizations for the following Test: Noise Level Testing and Structural Integrity Testing.
3. Standards for Vehicle Testing – AIS, IS, SAE, ECE, BIS
4. *Coast Down Test on a Vehicle b 1. Aerodynamic Drag calculation 2. Rolling Resistance Assessment following Test
5. On-Road Fuel Consumption Test Wheeler on Two-
6. *Brake efficiency test on a vehicle (stopping distance test).
7. Pass-by Noise Test.
8. Free acceleration test.
9. *Vehicle Performance Testing Using Chassis Dynamometer.
10. *Crash Test

Laboratory Equipment

1. Stroboscope: Digital ignition timing gun with LED Display, 12 V system, for 1 to 8 cylinder S.I. engine, Ignition adjustment from o to 60 degrees, engine speed range: 200 to 9999 rpm. additional crocodile clips and inductive pliers. 2
2. Brake efficiency tester: It is composed of a roller brake tester, a suspension tester and a side slip tester. Braking, suspensions & side slip, Productivity: totem with PC, touch screen and remote control, S9010 PTI testing process, Epoxy rollers. 6
3. Pass-by test set up: Single Mini Input Module,1 x 100 Hz GPS Data Logger, 1 x Laser Light Barrier Kit, 2 x 5 Ahr Li Ion battery pack, 1 x Vehicle Telemetry Radio, 1 x Road side Telemetry Radio, PC or Tablet, B&K 2250 SLM DC output cable to Min Input Module. 7
4. Chassis dynamometer for two/four-wheeler: Drive- 2WD, Torque-5000Lb-ft, Max power-500 HP, Dynamometer capable of supporting speeds up to 175+ MPH and 1250+ HP. The maximum axle weight is 6,500 lbs and the track width range is 36″-86″. Dynamometer shall be capable for different testing scenarios – FWD/RWD Cars, Sport Compacts, Diesel Trucks, Motorcycles and ATV’s. Eddy brake to perform acceleration, step, sweep and steady-state tests. View in realtime torque/horsepower output, at steady and changing speeds, Diagnose engine and drivetrain problems. Troubleshoot drivability issues. Run track ¼ mile or circle track lap simulations with reaction times that you determine in the software parameters. Bi-Directional roller for testing of both RWD and FWD vehicles. It shall be fully upgradeable in the field, it can be coupled with any other Chassis Dynamometer (7500, 15,000, or DC POD’s) for All-Wheel-Drive Testing. 9
5. Working Two-wheeler: Engine- single cylinder, air cooled,4-stroke,100-150CC, Min Power- 7ps @7500 rpm, torque-8 Nm @5000 rpm. Complying BS VI norms. All
6. Working Four-wheeler vehicle: 3 cylinder – 4 stroke, petrol/ diesel engine, Min 800CC, Min-35ps @5000 rpm, Torque 5 Nm @2500 rpm, complying BS VI norms. All

Learning Materials / Books

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Learning Websites

1. https://www.youtube.com/watch?v=yIovz10bMpk Vehicle crash test
2. https://www.youtube.com/watch?v=m9vdYeTVUrs Vehicle crash test
3. https://www.youtube.com/watch?v=WrScvpRzavI Chassis dynamometer test
4. https://youtu.be/M8I9X5ssEfw?feature=shared Pass by noise test
5. https://youtu.be/ZWI80ETZ480?feature=shared Chassis dynamometer test for two wheeler
6. https://youtu.be/jNgrem0Ll7M?feature=shared Testing and validation of Braking system
7. https://youtu.be/_8aPLp2FqOE?feature=shared Brake testing
8. https://youtu.be/fKCR09JH7pU?feature=shared Brake stopping distance test

For detail Syllabus of all other subjects of Mechanical Engineering, K scheme do visit Mechanical Engineering 5th Sem Syllabus for K scheme.

For all Mechanical Engineering results, visit MSBTE Mechanical Engineering all semester results direct links.