315009: Maintenance of Industrial Mechatronic Systems Syllabus for Mechatronics 5th Sem K Scheme MSBTE PDF

Maintenance of Industrial Mechatronic Systems detailed Syllabus for Mechatronics (MK), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below.

For all other MSBTE Mechatronics 5th Sem K Scheme Syllabus PDF, do visit MSBTE Mechatronics 5th Sem K Scheme Syllabus PDF Subjects. The detailed Syllabus for maintenance of industrial mechatronic systems is as follows.

Rationale

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Course Outcomes:

Students will be able to achieve & demonstrate the following COs on completion of course based learning

1. Apply different industrial maintenance methods.
2. Troubleshoot electrical and electronic systems in industry.
3. Troubleshoot mechanical systems in industry.
4. Troubleshoot industrial robotics systems.

Unit I

Fundamental of Industrial Maintenance. 1.1 Importance of industrial maintenance. 1.2 Types of maintenance: (a) Preventive maintenance (b) Corrective maintenance (c) Total productive maintenance (TPM). 1.3 Prepare Maintenance chart for mechatronics system, fault diagnosis, troubleshoot, repair.

Suggested Learning Pedagogie
Video Demonstrations Presentations Lecture Using Chalk-Board Hands-on

Unit II

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit III

Maintenance of mechanical system. 3.1 Explain maintenance of hydraulic pump: Gear pump, Vane pump, lobe pump, axial piston pump. 3.2 Explain maintenance of compressor: vane and screw compressor. 3.3 Explain maintenance of industrial valve and actuator: pressure control valve, pressure relief valve, pressure reducing valve, sequence valve, and linear and rotary actuators. 3.4 Explain leakage finding in hydraulic and pneumatic system. 3.5 Explain safety precaution taken during industrial mechanical maintenance.

Suggested Learning Pedagogie
Video Demonstrations Presentations Lecture Using Chalk-Board Hands-on

Unit IV

Maintenance of industrial robot and CNC machine. 4.1 Discuss common trouble and suggest remedy in robot operation and CNC machine. 4.2 Introduction on interlocking of robot. 4.3 Explain safety precaution taken during industrial robot and CNC machine maintenance.

Suggested Learning Pedagogie
Video Demonstrations Presentations Lecture Using Chalk-Board Hands-on

List of Experiments:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Laboratory Equipment

1. CNC lathe/milling machine 250 with standard accessories and multi controller changing facility with simulated control panel. 10
2. AC or DC servo motor (12V to 480V AC or DC), Stepper Motor (Bipolar or unipolar stepper motor from a few volts to 48V DC). 2
3. Position Sensors (Typically 5-24V DC), Velocity Sensors (Typically 5-24V DC), Pressure Sensors (Typically 5-24V DC), Torque Sensors (Typically 5-24V DC). 3
4. Gear Pump (up to 250 bar (3625 psi)), Vane Pump (up to 210 bar), Lobe Pump (up to 15 bar (217 psi)), Axial Piston Pump (up to 420 bar (6091 psi)). 4
5. pressure control valve, pressure relief valve, pressure reducing valve, sequence valve, Linear and rotary Actuator. 5,6
6. PLC kit (minimum 8 input/output) and Microcontroller kit. 8
7. Programmable robot trainer kit with standalone servo controller as well as compatible PLC interface with following features: (1) Minimum three linkages (2) Minimum four degree of freedom (3) Different mechanical end effectors (4) Various sensors (5) Compatible robot vision system for inspection. 9
8. General Tools like Adjustable Wrench (e.g., 6 inches, 10 inches), Screwdrivers, Socket Wrench Set (e.g., 1/4-inch, 3/8-inch, 1/2-inch drive), Pliers, Multimeter (Digital) Ammeter (025 mA), Voltmeter (0-5V, 0-10V DC). Allen Wrench (Hex Key Set- e.g., 1.5 mm, 2 mm, 3/16 inch), Hammer, Safety Glasses. All

Learning Materials

1. R. Keith Mobley. Maintenance Fundamental Elsevier Butterworth-Heinemann ISBN: 0750677988, Year 2020.
2. Majumdar S. R. Oil Hydraulic System- principles and Maintenance. Tata Mc Graw Hill, ISBN: 9780074637487, Year 2018.
3. Majumdar S. R. Pneumatic System- principles and Maintenance. Tata Mc Graw Hill, ISBN: 9780074637487, Year 2017.
4. Madhvi Gupta. Installation Maintenance and Repair of Electrical Machines and Equipment’s. S.K. Kataria & Sons, ISBN: 9789350145463, Year -2019.
5. Dr. R.S. Khandpur. TROUBLESHOOTING ELECTRONIC EQUIPMENT: Includes Repair and Maintenance. McGraw-Hill Education (India) Private Limited, ISBN: 9780070483576, Year-2019.
6. Mark R. Miller, Rex Miller. Robots and Robotics: Principles, Systems, and Industrial Applications. McGraw-Hill Education, ISBN: 9781259859786, Year 2017.

Learning Websites

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For detail Syllabus of all other subjects of Mechatronics, K scheme do visit Mechatronics 5th Sem Syllabus for K scheme.

For all Mechatronics results, visit MSBTE Mechatronics all semester results direct links.