Building Automation System detailed Syllabus for Instrumentation (IS), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below.
For all other MSBTE Instrumentation 5th Sem K Scheme Syllabus PDF, do visit MSBTE Instrumentation 5th Sem K Scheme Syllabus PDF Subjects. The detailed Syllabus for building automation system is as follows.
Rationale
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.
Course Outcomes:
Students will be able to achieve & demonstrate the following COs on completion of course based learning
- Describe the various components of building automation system.
- Maintain the different BAS Subsystems.
- Maintain HVAC system and its components.
- Control various parameters of BAS using direct digital controllers.
- Use BAS software for effective facility control.
Unit I
Building automation system 1.1 Intelligent building – Introduction, evolution, architecture, structure. 1.2 Building automation system (BAS) – Introduction, features, Benefits, Components of BAS. 1.3 BAS subsystem – Fire alarm system, CCTV and surveillance system, Access control system, HVAC. 1.4 Energy management system of building – Concept and features. 1.5 Safety policy and safety devices used in building automation system.
Suggested Learning Pedagogie
Lecture Using Chalk-Board Presentations Flipped Classroom
Unit II
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Unit III
Heating ventilation and air conditioning (HVAC) systems 3.1 Air properties – Dry bulb temperature, Wet bulb temperature, Relative humidity, Humidity ratio, Dew point temperature, Enthalpy, Specific volume (Definitions only). 3.2 Introduction to the psychrometric chart – Plotting HVAC processes on psychrometric chart. 3.3 HVAC system and components – Boiler, Chiller, Air handling unit (AHU), Air terminal unit (ATU), Variable air volume (VAV) equipment. 3.4 Classification of HVAC systems – All air system, All water system, Air-water system (Diagram, operation, advantages and disadvantages), HVAC zones and rooms. 3.5 Control strategies for occupant comfort – Control methods, Zone control, Temperature control, Humidity control. Control of primary equipment – Hot water system, Cold water system. Control of distribution system – Fanvolume and pressure control, Pumps- volume and pressure control. . 3.6 Maintenance of HVAC system.
Suggested Learning Pedagogie
Lecture Using Chalk-Board Demonstration Flipped Classroom
Unit IV
DDC Fundamentals in BAS 4.1 Hierarchical system configuration. 4.2 Types of Controllers – Zone level controllers, system level controllers, operation level processor and management level processor. 4.3 Communication protocol and communication media. BACnet Protocol 4.4 Controller Software- operating Software, application software, energy management software. 4.5 Typical DDC Operators: sequence, reversing, ratio, analog controlled digital output, digital controlled analog output, analog controlled analog output, Maximum input, Minimum input, Delay, Ramp.
Suggested Learning Pedagogie
Lecture Using Chalk-Board Video Demonstrations Flipped Classroom
Unit V
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
List of Experiments:
- BAS subsystems in a multistorage building / shopping complex
- *Effective use of safety devices in different BAS subsystems
- Effective use of fire detectors in a building.
- *Installation of given CCTV camera (non IP / IP based) using relevant software
- *Test the given CCTV system for fault detection
- *Install a single door access control system for the given application
- *Test and identify the faults in the given access control system
- Test the given fire alarm system
- Test functionality of sensors / transducers used in AHU.
- *Test the features of DDC controller operating software.
- *Test the features of DDC controller application software.
- *Test the features of Information Management software.
- Installation of a RFID based access control system.
- Test the chiller sensors/instruments used in HVAC system.
- Effective use of smoke detector for building safety
- Configure a given digital recording unit (DVR/NVR)
Self Learning
Assignment
- Explain personal and equipment safety practices followed in your institutes
- Prepare an instrument index sheet for sensors/instruments used in HVAC system.
- Prepare the specifications for boilers, chillers and humidifiers used for given industry/building.
- Identify various components of AHU used in the given application.
- Visit a local mechanic shop of an AC mechanic and list out the tools he uses for AC maintenance.
Micro Project
- Make a survey report of top BMS providers in market.
- Build a circuit for fan motor (AC or DC) speed control
- Build and construct model for boiler used in HVAC
- Build a circuit for fire detection
- Build a circuit for fire and smoke alarm system
- Build automatic door garage system
- Design a scheme for automatic lighting control of your institute building
Laboratory Equipment
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Learning Materials
- Jim Sinopoli Smart Buildings Butterworth-Heinemann imprint of Elsevier,2nded, 2010. ISBN-9780978614409
- Alan J. Zajac Building Environment: HVAC Systems Johnson Controls, Inc. ISBN-9780766821002
- Reinhold A. Carlson, Robert A. Di Giandomenico Understanding Building Automation system First Edition ISBN- 9780876292112
- Albert Ting-Pat So, WaiLok Chan Intelligent Building System Kluwer Academic, publisher, 3rd ed., 2012. ISBN- 9783319684611
- Robert Gagnon Design of Special Hazards and Fire Alarm Systems Thomson Delmar Learning; 2nd edition, 2007 ISBN-9781418039509
- Levenhagen, John I.Spethmann, Donald H HVAC Controls and Systems McGraw-Hill Publication ISBN-9780071786577
- Bela G. Liptak Process Control-Instrument Engineers Handbook Chilton book co. ISBN- 9781483145020
Learning Websites
- https://nptel.ac.in/courses/108106022
- Heating ventilation and air conditioning (HVAC) systems / Unit IV
- https://customer.honeywell.com/resources/techlit/TechLitDocu ments/77-0000s/77-E1100.pdf: HVAC, BAS basics, DDC, controller softwares. Unit III, Unit IV, Unit V – HVAC, DDC, and controller software
- http://www.schneider-electric.com/b2b/en Unit III, Unit IV, Unit V – HVAC, DDC, and controller software.
- https://sist.sathyabama.ac.in/sist_coursematerial/uploads/SA R1615.pdf Unit I
For detail Syllabus of all other subjects of Instrumentation, K scheme do visit Instrumentation 5th Sem Syllabus for K scheme.
For all Instrumentation results, visit MSBTE Instrumentation all semester results direct links.