Computer Aided Drawing and Simulation detailed Syllabus for Electrical Engineering (EE), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below.
For all other MSBTE Electrical Engineering 4th Sem K Scheme Syllabus PDF, do visit MSBTE Electrical Engineering 4th Sem K Scheme Syllabus PDF Subjects. The detailed Syllabus for computer aided drawing and simulation is as follows.
Rationale
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.
Course Outcomes:
Students will be able to achieve & demonstrate the following COs on completion of course based learning
- Comprehend Electrical Drawings.
- Locate various components of CAD software.
- Use relevant CAD Tools and Commands for Electrical Drawings.
- Draw different Electrical Drawings using CAD software.
- Simulate Basic Electrical and Electronic circuits.
Unit I
Electrical Drawings. 1.1 Symbols: Electrical and Electronic as per SP 30: 2023 Part 1, section 3. 1.2 Types of electrical drawings (a) Power wiring diagram (single line diagram (SLD) or Multiline diagram) (b) Control wiring diagram (Schematic diagram) (c) Block diagrams (d) Pictorial diagrams. 1.3 Types of Electrical panels (a) MCC (Motor control center) Panel (b) PCC (Power control center) panel (c) APFC (Automatic Power Factor Controller) Panel (d) PLC (Programmable logic controller) Panel. 1.4 General Arrangement (GA) diagram of Electrical control panel.
Suggested Learning Pedagogie
Hands-on Presentation Lecture Usin Chalk-Board
Unit II
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Unit III
CAD Tools and Commands. 3.1 Coordinate Method: Absolute, Relative, Polar. Basic commands: Limits, Units. 3.2 Draw Toolbar: Line, Polyline, Circle, Arc, Rectangle, Ellipse, Polygon, Hatch. 3.3 Modify Toolbar: Move, Rotate, Trim, Erase, Copy, Cut, Mirror, Fillet, Chamfer, Offset, Explode, Strech, Scale. 3.4 Annotation Toolbar: Multiline Text, Single Line Test, Linear dimension, Aligned dimension, Angular Dimension, Arc Length Dimension, Radius Dimension, Diameter Dimension 3.5 Important CAD Modes : Grid, Ortho, Snap, Polar Tracking, Object Snap Tracking.
Suggested Learning Pedagogie
Hands-on Demonstrati Presentation
Unit IV
Use of CAD in Real World Electrical Engineering Drawings. 4.1 Applications of electrical CAD software to: (a)Draw power wiring diagram of electrical control panel. (b)Draw control wiring diagram of electrical control panel. (c)Draw GA diagram of electrical control panel. 4.2 Applications of electrical CAD software to Single line diagram (SLD) of the 11 kV/433 V distribution substation. 4.3 Prepare Single line diagram (SLD) of residential/commercial unit using CAD. 4.4 Draw the Single line diagram (SLD) of any industrial electrical installation using CAD.
Suggested Learning Pedagogie
Hands-on Demonstrati Presentation
Unit V
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
List of Experiments:
- *Symbols of Electrical and Electronic Components as per SP 30: 2011(NEC 2011) part 1, section 3 or new equivalent IS on sketch book. 2 C
- *Power and Control wiring diagram of DOL Starter on sketch book. 2 C
- *Power and Control wiring diagram of Star Delta Starter on sketch book. 2 C
- General Arrangement Diagram for Electrical Panel on sketch book (Assume suitable dimensions). 2 C
- *Different components of CAD classic screen. 2 C
- *CAD file operations and Limits & Units of Drawing. 2 C
- * Basic geometrical shapes using Draw Toolbar commands (Line, Polyline, Circle, Arc, Rectangle, Ellipse, Polygon, Hatch). 2 C C
- Modifying or editing basic geometrical shapes using modify commands (Move, Rotate, Trim, Erase, Copy, Cut, Mirror, Fillet, Chamfer, Offset, Explode, Stretch, Scale). 2 C C
- *Annotation Toolbar commands (Multiline Text, Single Line Test, Linear dimension, Aligned dimension, Angular Dimension, Arc Length Dimension, Radius Dimension, Diameter Dimension). 2 C C
- *Important CAD Modes for drawing: Grid, Ortho, Snap, Polar Tracking, Object Snap Tracking. 2 C C
- *Symbols of Electrical and Electronic Components as per SP 30: 2011(NEC 2011) part 1, section 3 or new equivalent IS using CAD. 2 C C C
- *Power and Control wiring diagram of DOL Starter using CAD. 2 C C
- *Power and Control wiring diagram of Star Delta Starter using CAD. 2 C C
- *General Arrangement Diagram for Electrical Panel (Assume suitable dimensions) using CAD. 2 C C
- *Single Line Diagram (SLD) of the 11kV/433V distribution substation using CAD. 2 C C C
- *Single Line Diagram (SLD) of any Industrial Electrical Installation using CAD Part I. 2 C C C
- *Single Line Diagram (SLD) of any Industrial Electrical Installation using CAD Part II. 2 C C C
- *Use of simulation software. 2 C
- *Simulation for verification of Ohm’s law and series & parallel resistances in circuit. 2 C
- *Simulation of Kirchoff’s Current Law and Kirchoff’s Voltage Law. 2 C
- *Simulation of R-L series circuit. 2 C
- Simulation of R-C series circuit. 2 C
- Simulation of VI Characteristics of diode. 2 C
- *Simulation of single phase half-wave rectifier circuit. 2 C
- Simulation of single phase full-wave rectifier circuit. 2 C
- *Simulation of Basic Logic Gates. 2 C
- *Simulation of Triac Lamp Dimmer circuit. 2 C
- Simulation of Half and Full Adder Logic circuit. 2 C
- Simulation of Half and Full Subtractor circuit. 2 C
- P.C.B. Layout Preparation for electrical circuit using software. 2 C
Self Learning
Assignment
- Simulate stair case wiring circuit
- Simulate one switch one bulb house wiring diagram circuit
- Simulate Op-Amp integrator circuit design
- Simulate & Measure average power and power factor with a wattmeter
- Simulate series and parallel RLC circuit
- Study EPLAN software
Laboratory Equipment
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Learning Materials
- Cornel Barbu Electrician’s Book how to Read Electrical Drawings Lulu.com, ISBN-13: 9781435713208
- Prof. Sham Tickoo AutoCAD Electrical 2021: A Tutorial Approach, 2nd Edition CADCIM Technologies, ISBN-13 9781640571006, 1640571000
- John Reeder, Reeder Using Multisim 9 Troubleshooting DC/AC Circuits Delmar Cengage Learning, ISBN-13 9781111322137, 1111322139
Learning Websites
- https://www.kicad.org/ Kicad : This link download Open Sour PCB Design Kicad Software
- https://www.autodesk.com/education/students AutoCAD : Register and get free stude version of LATEST AutoCAD softwar
- https://law.resource.org/pub/in/bis/S05/is.sp.30.2011.pdf This link downloads IS SP:30 2011 (N 2011)
- https://powersimtech.com/products/ PSIM : This link downloads PSIM soft demo version
- https://powersimtech.com/wp-content/uploads/2021/01/PSIM-Use r-Manual.pdf This link downloads PSIM software us Manual
- https://scilab.in/DownloadScilab Scilab : This link downloads Scilab software
- https://librecad.org/ LibreCAD : This link downloads Open Source LibreCAD software
- https://www.falstad.com/circuit/ Falstad : This is an electronics circuit simulator applet
- https://www.ni.com/en/support/downloads/software-products/do wnload.multisim.html#452133 NI Multisim : This is an electrical and electronics circuit simulator
- https://www.youtube.com/watch?v=GH-JFXbOcZg&t=71s Hartley Oscillator circuit simulation on Multisim software
- https://www.youtube.com/watch?v=mzglU-tMgXY Simulating halfwave and full wave rect circuit in multisim
- https://www.youtube.com/watch?v=szfgbN0GD5A AutoCAD practice exercise
- https://www.youtube.com/watch?v=_2d_Tb9bzsQ&t=10s Series RLC Circuit Simulation using Multisim
- https://www.youtube.com/watch?v=UKpIGwto47U Triac Lamp Dimmer Circuit
- https://youtu.be/9m8ABCSKTec?si=Kuf6ryURVs9hpK49 VI Characteristics of PN junction diod 1N4007
For detail Syllabus of all other subjects of Electrical Engineering, K scheme do visit Electrical Engineering 4th Sem Syllabus for K scheme.
For all Electrical Engineering results, visit MSBTE Electrical Engineering all semester results direct links.