313316: Metrology and Measurement Syllabus for Mechanical Engineering 4th Sem K Scheme MSBTE PDF

Metrology and Measurement detailed Syllabus for Mechanical Engineering (ME), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below.

For all other MSBTE Mechanical Engineering 4th Sem K Scheme Syllabus PDF, do visit MSBTE Mechanical Engineering 4th Sem K Scheme Syllabus PDF Subjects. The detailed Syllabus for metrology and measurement is as follows.

Rationale

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Course Outcomes:

Students will be able to achieve & demonstrate the following COs on completion of course based learning

1. Select relevant linear measuring instrument for measurement.
2. Select different gauges and comparators for measurement of given components.
3. Use relevant instrument for measurement of different parameters of engineering components.
4. Select relevant instrument for measuring the physical parameters of given system.
5. Use relevant instrument for measurement of operating parameters of system.

Unit I

Overview of Metrology and Linear Measurement 1.1 Definition of Metrology, objective and types of Metrology, Need of inspection, Methods of measurements. 1.2 Characteristics of instruments – Static characteristics: Least count (resolution), Range and Span, Accuracy and Precision, Reliability, Calibration, Hysteresis, Dead Zone, Drift, Sensitivity, Threshold, Repeatability, Reproducibility, Linearity, Amplification, Magnification. Dynamic characteristics: Speed of response, Fidelity, Overshoot. 1.3 Standards: Definition and characteristics of Line standard, End standard and Wavelength standard. 1.4 Linear measuring Instruments: Working principle of Vernier caliper, micrometer, height gauge and depth gauge. 1.5 Types of Errors and its sources in Measurements, Factors affecting on accuracy. 1.6 Selection of instrument, Precautions while using an instrument for getting higher precision and accuracy.

Suggested Learning Pedagogie
Lecture Usin Chalk-Board Presentations Video Demonstratio Demonstratio

Unit II

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit III

Angular, Screw Thread, Gear and Surface Finish Measurements 3.1 Angle measurement: Instruments used in Angular Measurements: Angle Gauges (No Numerical), Bevel Protractor, sine bar. Principle of Working of Angle Dekkor. 3.2 Screw thread Measurements: Screw thread terminology, measurement of different elements such as major diameter, minor diameter, effective diameter, pitch, thread angle. Best wire size, Two wire method, Working principle of floating carriage micrometer. 3.3 Gear Measurement: Parkinson Gear tester, Gear tooth Vernier, Profile projector. 3.4 Surface Roughness Measurement: Meanings of surface texture and definitions, methods of surface measurement -Ra, Rz and RMS values (No Numerical), Principle of Interferometry, Taylors Hobsons Talysurf. 3.5 CMM: Introduction to Coordinate Measurement Machine (CMM) and its merits.

Suggested Learning Pedagogie
Lecture Usin Chalk-Board Presentations Video Demonstratio Demonstratio

Unit IV

Displacement, Temperature and Flow Measurement 4.1 Generalized measuring system and its components. 4.2 Transducers: Classification of transducers- active and passive, contact, non-contact, Mechanical, Electrical, analog, digital. Applications of transducers. 4.3 Displacement Measurement: Specification, selection and application of displacement transducer, LVDT, RVDT, Potentiometer. 4.4 Temperature Measurement: Non-electrical methods-Bimetal and Liquid in glass thermometer. Electrical methods- RTD, Thermistor, Thermocouple. 4.5 Flow measurement: Types of flow meters. Selection criteria for flow meters. Variable area meter- Rota meter. Vane type Anemometer. Lecture Usin

Suggested Learning Pedagogie
Chalk-Board Presentations Video Demonstratio Demonstratio

Unit V

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

List of Experiments:

1. *Measurement of Length and weight by using ancient measurement system (IKS) 2 C C
2. *Measurement of dimensions of component using vernier caliper, vernier height gauge, vernier depth gauge, micrometer and inside micrometer. 2 C
3. Roundness checking of the given component using dial indicator / dial gauge. 2 C
4. *Measurement of unknown angle of a component using Bevel Protractor and verification by Sine bar. 2 C
5. *Measurement of the screw thread elements by using floating carriage micrometer and verification by optical profile projector 2 C
6. *Measurement of the gear tooth elements using gear tooth vernier caliper and verification by optical profile projector. 2 C
7. *Measurement of the surface roughness of machined surface by using surface roughness tester. 2 C
8. Measurement of flatness of given component by using optical flats. 2 C
9. Measurement of the unknown angle of a given component by Autocollimator / Angle Dekkor. 2 C
10. *Measurement of displacement by using Linear Variable Displacement Transducer (LVDT). 2 C
11. Measurement of temperature by thermocouple and Verification by thermometer. 2 C
12. Measurement of flow rate of liquid by rotameter. 2 C
13. *Measurement of weight by using a load cell. 2 C
14. Sound intensity measurement using sound meter 2 C
15. Measurement of speed of rotating shaft by stroboscope or inductive pick up. 2 C

Self Learning

Micro Project

1. Comparative study of various linear measuring instruments like steel rule, Inside-outside micrometer, Ver caliper and Digital caliper with proper justification.
2. Comparative study of surface finish of various samples machined by various machining / finishing processes surface roughness tester.
3. Prepare a report on calibration procedure of Vernier Caliper and Micrometer followed by NABL Lab.
4. Prepare a visit report on measurement systems used in near by industries / SME / Workshops / Fabrication sh 5)Perform comparative study of different contact and non contact type transducers / sensors.
5. Visit to Automobile service station, observe the different sensors used in cars and prepare a report of the sam (Name, Use, Location, Working, Applications)

Assignment

1. Prepare a report to interpret effect of errors on the accuracy of instrument and measurement.
2. Visit to any nearby shop or industry and list out different gauges used for inspection along with its purpose.
3. Prepare a comparative study of different screw threads measuring instruments on the basis of their least coun accuracy, cost, ease of operation
4. Prepare a short report on different types of Rotameter.
5. Prepare a set of procedure for sound measurement with suitable instrument.

Laboratory Equipment

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Learning Materials

1. N.V. RAGHAVENDRA and L. ENGINEERING METROLOGY AND MEASUREMENTS Oxford University Press, New Delhi, KRISHNAMURTHY ISBN-13: 978-0-19-808549-2. (2013)
2. Anand K Bewoor and Vinay A Kulkarni METROLOGY AND MEASUREMENTS Tata McGraw-Hill Education Private Limited, New Delhi , India ISBN (13) 978-0-07-014000-4 (2017)
3. R K Jain Engineering Metrology Khanna Publication, New Delhi, ISBN 10:817409153X (2022)
4. R. K. Rajput Engineering Metrology & Instrumentation S.K. Kataria and Sons ISBN:9788185749822 (2009)
5. R K Jain Mechanical and Industrial Khanna Publication, New Delhi ISBN Measurements 8174091912 (1995)
6. Thomas G. Beckwith, Roy D. Marangoni, John H. Lienhard · Mechanical Measurements Pearson Prentice Hall ISBN:9780136093763 (2013)

Learning Websites

1. https://onlinecourses.nptel.ac.in/noc20_me94/preview NPTEL MOOCS course on Engineering Metrology
2. https://onlinecourses.nptel.ac.in/noc23_me09/preview NPTEL MOOCS course on Mecha measurement systems.
3. https://www.youtube.com/watch?v=Hi7NUJdznc0 Video Lecture on Engineering Metrology by IIT Madras.
4. http://www.digimat.in/nptel/courses/video/112106179/L33.html Video Lecture on Electrical and electronic comparators, Opt comparators NPT Video Course : Metrology
5. https://www.bing.com/videos/riverview/relatedvideo?&q=videos +on+CMM+measurement+IIT&&mid=6C0843737C0E8F2019006C0843737C0 E8F201900&&FORM=VRDGAR Video on Part inspection by usi CMM
6. https://www.bing.com/videos/riverview/relatedvideo?q=videos+ on+screw+thread+measurement+IIT&&view=riverview&mmscn=mtsc&m id=9850B2C61C0872810AC19850B2C61C0872810AC1&&aps=196&FORM=VM SOVR Measurement of screw thread elements.
7. https://www.bing.com/videos/riverview/relatedvideo?&q=videos +on+displacement+measurement&&mid=53BAFCB5E8DA5553247253BAFC B5E8DA55532472&&FORM=VRDGAR Potentiometer Working Principl
8. https://www.bing.com/videos/riverview/relatedvideo?&q=bimeta llic+temperature+measurement+devices&&mid=3ADB81DF5F95342EE5 B53ADB81DF5F95342EE5B5&&FORM=VRDGAR How Bimetallic Temperature Gau Works
9. https://www.bing.com/videos/riverview/relatedvideo?&q=flow+m easurement+devices+rotameter&&mid=145B5C41696FC6AFF30B145B5C 41696FC6AFF30B&&FORM=VRDGAR Flow Measureme Devices
10. https://www.bing.com/videos/riverview/relatedvideo?&q=carbon +microphone&&mid=B08AB66B421E46892B46B08AB66B421E46892B46&&F ORM=VRDGAR Build a carbon microphone with soda can and a pa clip
11. https://www.bing.com/videos/riverview/relatedvideo?&q=hair+h ygrometer+working+principle&&mid=20C836F03B5418F173D620C836F 03B5418F173D6&&FORM=VRDGAR Actual working o Hair Hygrometer

For detail Syllabus of all other subjects of Mechanical Engineering, K scheme do visit Mechanical Engineering 4th Sem Syllabus for K scheme.

For all Mechanical Engineering results, visit MSBTE Mechanical Engineering all semester results direct links.