Elements of Electronics detailed Syllabus for Electrical Engineering (EE), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below.
For all other MSBTE Electrical Engineering 2nd Sem K Scheme Syllabus PDF, do visit MSBTE Electrical Engineering 2nd Sem K Scheme Syllabus PDF Subjects. The detailed Syllabus for elements of electronics is as follows.
Rationale
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.
Course Outcomes:
Students will be able to achieve & demonstrate the following COs on completion of course based learning
- Identify various electronic components
- Use semiconductor diodes in different applications.
- Use semiconductor transistors in different applications.
- Use different types of Oscillators as per requirement
- Test operation of regulated power supply.
Unit I
Electronic components and Signals 1.1 Active and passive components 1.2 Resistor,Capacitor,inductor,symbols,applications,colour codes, specifications 1.3 Concept of Unipolar and Bipolar Devices. 1.4 Classification of signals-sinusoidal, triangular and square 1.5 Signal waveform ,Time and Frequency domain, Representation, Amplitude,Frequency,phase,wavelength 1.6 Voltage and current source Ideal and non ideal Sources Dependent voltage and current sources .
Suggested Learning Chalk-Board Assignment Demonstrations Hands-on
Unit II
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Unit III
Semiconductor Transistors 3.1 Current operating Devices, Bipolar Junction Transistor- Types NPN , PNP, symbol, construction and working principle . 3.2 Need of biasing ,Types- Fixed bias and Voltage divider bias 3.3 Regions of operation and their significance – Cut off region , Active region and Saturation region 3.4 Transistor configurations: CB, CE, CC, working , comparison and applications 3.5 Transistor parameters- Alpha, Beta, Gama, Input, and output resistance, Relationship between alpha and beta, numerical on same. 3.6 Applications- Transistor as an amplifier- Small signal and power amplifier , Class A, Class B, Class C, Class AB Amplifier , Transistor as a switch , 3.7 Voltage operating devices, Construction Of JFET(N-Channel and P channel),symbol ,working principle, different parameters of JFET and applications. 3.8 MOSFET: Construction ,symbol ,working principle of Enhancement and Depletion MOSFET, and their applications.
Suggested Learning Chalk-Board Assignment Demonstration Hands-on
Unit IV
Oscillators 4.1 Oscillator: Need, Definition 4.2 Types of feedback: Positive feedback, Negative feedback. Barkhausen’s criterion 4.3 Oscillator: Circuit Diagram , working and comparison of RC ,LC, and Crystal oscillator. 4.4 Types of RC oscillator- Wien bridge and RC Phase shift Oscillator Frequency calculation 4.5 Types of LC oscillator-Colpitts oscillators ,Hartley oscillators.Frequency calculation
Suggested Learning Chalk-Board Assignment Demonstration Hands-on
Unit V
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Practical / Tutorial Experiences
- Identification of Active and Passive components and DMM handeling.
- Measurement of amplitude, time period and frequency of given signal on CRO
- Check the performance of PN Junction diode.
- * Check performance of Zener diode.
- Test the performance of photo diode by varying the light intensity as well as the distance of the light source.
- * Construct and Test the half wave rectifier.
- *Prepare and Test the half wave rectifier with LC filter/ π filter
- *Build and Test the full wave rectifier using two diodes
- * Construct and Test the full wave Bridge rectifier on bread board using four diodes
- *Use LC/ π filter with full wave rectifier to measure ripple factor.
- * Prepare and Test the full wave rectifier on bread board using IC KBU 808 with filter.
- *Build clipper circuit and observe the waveforms.
- * Construct clamper circuit and observe waveforms.
- Identify and select transistors for given application using datasheets
- Build and Test the performance of BJT in CB mode
- * Construct and test the circuit for BJT in common emitter configuration.
- *Test the performance parameters of BJT as Switch
- * Check the performance of FET drain Characterstics.
- Test the performance of FET transfer characteristics and calculate transconductance.
- Measure the frequency of given Oscillator circuit
- *Find out faults at different stages of regulated DC power supply
- *Trouble shoot given DC regulated power supply
- *Build and Test the performance of Zener voltage regulator for given voltage.
- * Construct and Test the performance of Positive voltage regulator using 78XX , three terminal IC for given voltage.
- * Prepare and Test the performance of Dual voltage regulator using 78XX and 79XX ,three terminal IC for given voltage
- *Test the performance of IC 723 as Regulator.
Note : Out of above suggestive LLOs – ‘*’ Marked Practicals (LLOs) Are mandatory. Minimum 80% of above list of lab experiment are to be performed. Judicial mix of LLOs are to be performed to achieve desired outcomes.
Micro Project / Self Learning
Micro project
- Transistor as switch- Build /Test transistor switch circuit on General purpose PCB for various input signals
- Diode: Build a circuit on general purpose PCB to clip a positive half cycle at 1.5 v of a waveform with input signal 5Vpp, and prepare the report
- Diode: Build a circuit on general purpose PCB to clamp a waveform at 3.0 V using diode and passive components.
- Photodiode: Build a circuit on breadboard to turn the relay on and off by using photo diode and prepare a report.
- Rectifier: Build a half wave rectifier for 6V, 500mA output current on general purpose PCB.
- Rectifier: Build a full wave bridge rectifier with capacitor filter for 6V, 500mA output current on general purpose PCB
- Using Data sheets compare various electronic parameters of different types of JFET and MOSFET.
- Transistor as switch- Build /Test transistor switch circuit on General purpose PCB for various input signals
- Transistor- Build a circuit to switch on and off the LED using BJT as a switching component
- Voltage Regulator: Build a circuit of DC regulated power supply on general purpose PCB for 9V and 500mA output
- Oscillator: Build circuit to generate audio frequency.
- Prepare display boards/models/charts to visualize the appearance of electronic active and passive components.
Assignment
- Study Different types of Rectifier ICs available.
- Study working of OLED Display.
Laboratory Equipment / Software Required
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Learning Materials / Books
- V .K. Mehta ,Rohit Mehta Principles of Electronics S.Chand and Company Ram Nagar, New Delhi-110 055,11th edition 2014, ISBN 9788121924504
- B.L.Theraja Basic Electronics S. Chand Publishing, 2007,ISBN:9788121925556
- R.S.Sedha A textbook of Applied Electronics S Chand, New Delhi 2008, ISBN:978-8121927833
- Mottershead,Allen Electronic Devices and Circuit: An introduction Goodyear Publishing Co. New Delhi ISBN: 9780876202654
- Horowitz, Paul Hill, Winfield The Art of Electronics Cambridge University Press, New Delhi 2015 ISBN: 9780521689175
- Bell, David Fundamentals of Electronic Devices and Circuits Oxford University Press, International edition, USA,2015,ISBN:9780195425239
- Vijay Baru, Rajendra Kaduskar, Sunil T. Gaikwad Basic Electronic Engineering Dreamtech press,New Delhi,2015,ISBN:9789350040126
Learning Websites & Portals
- https://www.youtube.com/watch?v=Fwj_d3uO5g8 Diodes
- http://www.eleccircuit.com Electronic circuit
- https://www.electroschematics.com/tools/ Electronic tools
- www.futurlec.com Electronic tools/components
- www.alldatasheet.com Datasheets
- www.nptel.iitm.ac.in Electronic circuits
- www.electronics-tutorials Electronic circuits
- https://www.learningaboutelectronics.com/ Voltage Regulator
- https://www.animations.physics.unsw.edu.au/ Electronic tools/components/Circuit
For detail Syllabus of all other subjects of Electrical Engineering, K scheme do visit Electrical Engineering 2nd Sem Syllabus for K scheme.
For all Electrical Engineering results, visit MSBTE Electrical Engineering all semester results direct links.