Engineering Workshop Practice (Electronics Group) detailed Syllabus for Instrumentation (IS), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below.
For all other MSBTE Instrumentation 1st Sem K Scheme Syllabus PDF, do visit MSBTE Instrumentation 1st Sem K Scheme Syllabus PDF Subjects. The detailed Syllabus for engineering workshop practice (electronics group) is as follows.
Rationale
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.
Course Outcomes:
Students will be able to achieve & demonstrate the following COs on completion of course based learning
- Use firefighting equipment and other safety related accessories.
- Use fitting and sheet metal tools in the workshop.
- Test active and passive electronic components.
- Perform soldering and de-soldering using soldering tools.
- Build simple jobs in the electronic workshop.
Unit I
General Workshop Practice 1.1 Safety practices, causes of accidents, general safety rules, safety signs and symbols 1.2 First aid 1.3 Fire, causes of fire, basic ways of extinguishing the fire, classification of fire, class A, B, C, D, firefighting equipment, fire extinguishers and their types 1.4 Workshop layout 1.5 Issue and return system of tools, equipment and consumables Demonstrate operation of available extinguisher in workshop Show first aid box Practice by students for handling fire extinguisher
Unit II
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Unit III
Identification of Electronic Components 3.1 Electronic components – Passive components like resistor, capacitor and inductor, active components like diode, transistor, IC. Identify SMD components 3.2 Switches, relays, LEDs, 7-segment display, step-down transformer, connectors and cables used in electronics circuits 3.3 Data sheet and the catalog of electronics components, multimeter 3.4 Tools required for electronic workshop -specifications, cost and other important characteristics (Catalogs of multimeter, power supply, to collect the latest information of tools) Hands on practice
Unit IV
Electronic Soldering Shop 4.1 Soldering and de-soldering tools like normal soldering gun, temperature-controlled soldering gun, soldering metals, soldering flux, de-soldering gun, de-soldering pump, desoldering mesh 4.2 Soldering techniques like hand soldering, wave soldering and dip soldering 4.3 Soldering of simple electronics components like resistors, capacitors, diode, switches, LEDs on general purpose PCB 4.4 Dry soldering, problems of dry and loose soldering 4.5 De-soldering of the components from the PCB Hands on practice demonstration video on use of soldering station
Unit V
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Practical / Tutorial Experiences
- Safety symbols
- Fire extinguishers and accessories
- Fitting shop hand tools and equipment
- Fitting shop machine tools and equipment
- Identification of fitting tools for given specifications
- Identification of sheet metal tools for given specifications
- Fitting job preparation
- Identification of tools and equipment in sheet metal shop
- Preparation of sheet metal jobs
- Job preparation using sheet metal and fitting operation
- Passive, active and SMD components
- Multimeter
- Determination of resistor value
- Diode testing
- 7- Segment display
- Testing resistors on breadboard using multimeter
- Testing capacitors on breadboard using multimeter
- Identification of windings of transformer
- Relay terminals
- Soldering and desoldering components on PCB
- Building circuit on breadboard
- Building circuit using relay and components
- Building and testing of circuits on PCB
- Identification of components and virtual instruments in simulation software
- Building and Testing of circuit using basic simulation software
- Draw sketches of various ancient tools 2
Laboratory Equipment / Software Required
- Mechanical foam type Fire Extinguisher with ISI mark ( 9 litre, B and C type Fire Extinguisher) 1,2
- A, B, C portable type Fire Extinguisher with ISI mark 1,2
- Fitting tools: Hammers, Chisels, Files, Hacksaw, Surface Plate, Punch, V Block, Angle Plate, Try Square, Marking Block, Steel Rule, Twist Drills, Reamers, Tap Set, Die Set 3,4,5,7
- Bench Drilling machine (up to 13 mm drill cap.) with ½ H.P. Motor 1000 mm. height 3,4,5
- Power Saw machine: 350 mm mechanical with 1 HP Motor & all Accessories 3,4,5
- Bench Grinder: 200 mm Grinding Disc diameter 200 mm. with 25 mm. bore 3,4,5
- Work Benches: 1800mm*1900mm*750mm 3,4,5,6,7,8,9,10
- Sheet Metal Hand Tools: Snip, Shears Sheet Gauge, Straight Edge, L Square, Scriber, Divider, Trammel, Punches, Pliers, Stakes, Groovers, Limit Set 6,8,9,10
- Consumable Components: Resisters, Capacitors, Diodes, Transistors, ICs, IC Sockets, General Purpose PCBs, LEDs, Relays, Switches, Connectors, Connecting Wires, Soldering Metal, Soldering Flux, De-soldering Mesh 11,13,14,15,16,17,19,21,22,23
- Magnifying Lens with Lamp 11
- Multimeter: 3 and ½ digit with Component Tester 12,13,14,15,16,17,18,19,23
- Wire Cutter 16,17,21,22,23
- Anti-static Mat 16,17,18,19,20,21,22,23,24,25
- Soldering Gun: 40 Watts, Holding Stand, Temperature Control, Power Cord 20,22
- De-soldering Gun: 80 Watts 20,22
- Clip-on Ammeter 22
- PCB Drilling Machine 22
- Open-source Simulation Software 24,25
Learning Materials / Books
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Learning Websites & Portals
- http://fireextinguishertraining.com/ Fire extinguisher
- www.youtube.com/watch?v=WE-SislzSMY Fire extinguisher
- https://www.youtube.com/watch?v=lUojO1HvC8c Fire extinguisher
- https://www.youtube.com/watch?v=0jbFC8dvTVY Electrical tools
- https://www.electroschematics.com/tools/ Electronic tools
- https://www.youtube.com/watch?v=Fwj_d3uO5g8 Diodes
- http://www.eleccircuit.com Electronic circuit
- https://mightyohm.com/files/soldercomic/FullSolderComic_EN.p df Soldering
- https://www.tinkercad.com/ 3D modeling software
- multisim online Simulation software
ENGINEERING GRAPHICS (ELECTRONICS, COMPUTER AND ALLIED BRANCHES)
Rationale
engineering graphics is the language of engineers. The concepts of graphical language are used in expressing the ideas, conveying the instructions, which are used in carrying out the jobs on the sites, shop floor etc. This course is useful in developing drafting and sketching skills in the student. It covers the knowledge & use of drawing instruments & also familiarizes the learner about Bureau of Indian standards related to engineering drawing. The curriculum aims at developing the ability to draw and read various engineering curves, projections and dimensioning styles. The subject mainly focuses on use of drawing instruments, developing imagination and translating ideas into sketches. This course also helps to develop the idea of visualizing the actual object or part on the basis of drawings and blue prints. This preliminary course aims at building a foundation for the further courses related to engineering drawing and other allied courses in coming semesters
Course Outcomes:
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Unit I
Basic Elements of Drawing 1.1 Drawing Instruments and supporting material: method to use them with applications. 1.2 Standard sizes of drawing sheets (ISO-A series) 1.3 I.S. codes for planning and layout. 1.4 Letters and numbers (single stroke vertical) 1.5 Convention of lines and their applications. 1.6 Scale – reduced, enlarged & full size 1.7 Dimensioning techniques as per SP-46 (Latest edition) – types and applications of chain, parallel and coordinate dimensioning 1.8 Geometrical constructions.
Unit II
Engineering curves & Loci of Points. 2.1 Concept and understanding of focus, directrix, vertex and eccentricity. Conic sections. 2.2 Methods to draw an ellipse by Arcs of circle method & Concentric circles method. 2.3 Methods to draw a parabola by Directrix-Focus method & Rectangle method 2.4 Methods to draw a hyperbola by Directrix-Focus method. 2.5 Methods to draw involutes: circle & pentagon, 2.6 Methods to draw Cycloidal curve: cycloid, epicycloid and hypocycloid 2.7 Methods to draw Helix & Archimedean spiral. 2.8 Loci of points on Single slider crank mechanism with given specifications
Unit III
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Unit IV
Computer Aided Drafting 4.1 Basic entities: line, circle, arc, polygon, ellipse, rectangle, multiline, polyline. 4.2 Commands: trim, delete, copy, offset, array, block, layers. 4.3 Dimensioning: linear, horizontal, vertical, aligned, rotated, baseline, continuous, diameter, radius, angular dimensions. 4.4 Text: Single line, multiline. 4.5 Standard sizes of sheet, selecting various plotting parameters such as paper size, paper units, drawing orientation, plot scale, plot offset, plot area, print preview.
Unit V
Free Hand Sketches of Engineering Elements 5.1 Free hand sketches of machine elements: Thread profiles, nuts, bolts, studs, set screws, washers, Locking arrangements. (For branches other than mechanical Engineering, the teacher should select branch specific elements for free hand sketching)
Practical / Tutorial Experiences
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Suggested Micro Project / Self Learning
Micro project
- List the applications of engineering curves in different fields of engineering and submit a report on it.
- Prepare a list of industrial and household components in which conic curves are used and justify the utility of these curves.
Laboratory Equipment/Software Required
- Drawing Table with Drawing Board of Full Imperial/ A1 size. All
- Models of objects for orthographic projections 7,8,9,10
- Models/ Charts of objects mentioned in unit no. 5 16,17
- Set of various industrial drawings being used by industries. All
- Set of drawings sheets mentioned in section 6.0 could be developed by experienced teachers and made used available on the MSBTE portal to be used as reference/standards. All
- Drawing equipment and instruments for class room teaching-large size: a. T-square or drafter (Drafting Machine). b. Set squires (450 and 300-600) c. Protector. d. Drawing instrument box (containing set of compasses and dividers). Drawing sheets, Drawing pencils, Eraser, Drawing pins / clips All
- CAD Workstation: 2GB RAM, 320 GB HDD, 17″ screen, 1GHz (Minimum Requirement) 11,12,13,14
- Plotter: Print Resolution upto 1200X600 Dpi, 16 MB Memory 11,12,13,14
- Licensed Latest Network of AutoCAD Software 11,12,13,14
Suggested Learning Materials
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Learning Websites & Portals
- https://www.youtube.com/watch?v=dmt6_n7Sgcg Free Hand Sketches
- https://www.youtube.com/watch?v=dmt6_n7Sgcg Orthographic Projection
- https://www.youtube.com/watch?v=3WXPanCq9LI Basics of Projection
- https://www.youtube.com/watch?v=fvjk7PlxAuo Introduction to Engineering Graphics
- https://www.youtube.com/watch?v=cmR9cfWJRUU Basics of AutoCAD
For detail Syllabus of all other subjects of Instrumentation, K scheme do visit Instrumentation 1st Sem Syllabus for K scheme.
For all Instrumentation results, visit MSBTE Instrumentation all semester results direct links.