For detailed syllabus of all the other subjects of Electronics & Communication Engineering (EC) 7th Sem, 2021 curriculum do visit Electronics & Communication Engineering 7th Sem subject syllabuses for 2021 regulation. For Electronics & Communication Engineering 7th Sem semesters scheme and subjects, refer to Electronics & Communication Engineering 7th Sem 2021 regulation scheme. The scheme details of Professional Elective-IV for Electronics & Communication Engineering 7th Sem is as follows.

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

To see the syllabus of all other branches of diploma 2021 revision curriculum do visit SITTTR diploma all branches syllabus..

To see the results of Electronics & Communication Engineering of diploma 2021 revision curriculum do visit SITTTR diploma results..

For all Electronics & Communication Engineering academic calendars, visit Electronics & Communication Engineering all semesters academic calendar direct link.

Wishing you great luck ahead.

For Electronics & Communication Engineering 7th Sem scheme and its subjects, do visit Electronics & Communication Engineering (EC) 7th Sem 2021 regulation scheme. For Professional Elective-IV scheme and its subjects refer to Electronics & Communication Engineering (EC) Professional Elective-IV syllabus scheme. The detailed syllabus of embedded systems lab is as follows.

Course Objectives:

To develop the ability to design microcomputer-based embedded systems. This class allows students to learn microcomputer interfacing from both a hardware and software perspective.

Course Outcomes:

On completion of the course, the student will be able to:

1. Make use of AVR studioto exercise simple programs
2. Develop embedded C programs to interface various sensors and motors
3. Realize interfacing of display devices, keyboard and ADC/DAC converters
4. Realize I2C and SPI Communication interfaces with AVR

Module 1:

1. Familiarize AVR studiofor AVR programming
2. Develop programs for LED blinking
3. Read the status of a switch and display it on an LED
4. Develop programs to drive a load using Relay
5. Make use of AVR tointerface optocoupler.

Module 2:

1. Realize Temperature sensor interfacing with AVR
2. Demonstrate interfacing of Humidity sensor with AVR
3. Demonstrate DC Motor interface with AVR
4. Illustrate Servo Motor Interfacing with AVR
5. Realize Stepper Motor Interfacing with AVR

Module 3:

1. Realize Seven segment display interface with AVR
2. Demonstrate LCD interfacing with AVR
3. Illustrate Matrix Keyboard interfacing with AVR
4. Realise ADC/DAC interfacing with AVR

Module 4:

1. Familiarize I2C and SPI interfacing with AVR
2. Develop programs for Real time clock interfacing
3. Demonstrate ADC interfacing using I2C
4. Demonstrate DAC interfacing with I2C

Text Books:

1. K.V. Shibu, Introduction to Embedded Systems, 2e, McGraw Hill Education India, 2016.
2. Rajkamal, Embedded Systems Architecture, Programming and Design, TMH, 2003

Reference Books:

1. Muhammad Ali Mazidi, SarmadNaimi, &SepehrNaimi, The AVR Microcontroller and Embedded Systems Using Assembly and C, Pearson Education
2. Michael J. Pont, Embedded C, Pearson Education, Second Edition

Online Resources

1. https://www.studyelectronics.in/embedded-programming-tutorial-chapter-1-beginners/
2. https://www.tutorialspoint.com/embedded_systems/index.htm
3. https://embeddedschool.in/avr-microcontroller-programming/
4. https://www.electronicwings.com/avr-atmega/atmega1632-usart
5. https://www.exploreembedded.com/wiki/A6.AVR_Interfacing:_RTC_DS1307
6. https://www.electronicwings.com/avr-atmega/atmega1632-i2c

Suggested Open-Ended Experiments

1. Develop projects like
• Automatic sanitizer dispenser
• Automatic water level controller
• Automatic glass door system
• Temperature controlled DC fan
• Line follower robot
• Automated wheel chair with hand held control panel

For detailed syllabus of all other subjects of Electronics & Communication Engineering, 2021 revision curriculum do visit Electronics & Communication Engineering (EC) 7th Sem subject syllabuses for 2021 revision.

To see the syllabus of all other branches of diploma 2021 revision curriculum do visit SITTTR diploma all branches syllabus..

To see the results of Electronics & Communication Engineering of diploma 2021 revision curriculum do visit SITTTR diploma results..

For all Electronics & Communication Engineering academic calendars, visit Electronics & Communication Engineering all semesters academic calendar direct link.

For Electronics & Communication Engineering 7th Sem scheme and its subjects, do visit Electronics & Communication Engineering (EC) 7th Sem 2021 regulation scheme. For Professional Elective-IV scheme and its subjects refer to Electronics & Communication Engineering (EC) Professional Elective-IV syllabus scheme. The detailed syllabus of medical electronics lab is as follows.

Course Objectives:

• To provide hands-on experience in circuit design.
• To equip students to design and set up the circuits used in the medical instruments.
• To lay foundation for developing skills in maintenance and servicing of medical equipment.

Course Outcomes:

On completion of the course, the student will be able to:

1. Make use of the op-amp based circuits to design and implement front end circuits in medical instruments. 1
2. Implement circuits for signal processing in biopotential recorders
3. Implement circuits for output section in medical instruments
4. Experiment with ICs for implementing medical electronic circuits.

Module 1:

1. Design and implement a Bio-amplifier circuit using op-amp and find out CMRR.
2. Design and implement a Notch filter circuit using op-amp and (i) plot frequency response (ii) measure the band reject frequency.
3. Design and implement a second order low pass filter circuit using op-amp and (i) plot frequency response (ii) measure the upper cut off frequency.
4. Design and implement a second order high pass filter circuit using op-amp and (i) plot frequency response (ii) measure the lower cut off frequency.
5. Design and implement a Band pass filter and (i) plot the frequency response (ii) measure bandwidth.

Module 2:

1. Setup Half wave and Full wave Precision rectifier circuits using op-amp and plot the input and output waveforms.
2. Setup a Threshold detector using op-amp for a given voltage level.
3. Implement a Phase detector circuit using PLL IC and observe the phase difference between input and output.
4. Set up a Sample and hold circuit using op-amp.

Module 3:

1. Implement the circuit that drives the Power amplifier for stylus movement.
2. Implement the Chart drive circuit for biosignal recorders.
3. Implement the automatic gain control circuit for biosignal recorders

Module 4:

1. Demonstrate the working IC 4051 and verify the output.
2. Demonstrate the working IC7107 and verify the output.
3. Open Ended experiments

Suggested Open Ended Projects

(Not for End Semester Examination but compulsory to be included in Continuous Internal Evaluation. Students can do open ended experiments as a group of 4-5. There is no duplication in experiments between groups. Open ended experiments should include the concepts of circuit design and application)

1. Implement simple circuits that form part of medical instruments in breadboard/simulation software/PCB (examples of experiments)
• ECG Telemetry system
• Digital BP meter
• Heart rate monitor
• QRS detector
• Pulse sensor

Text Books:

1. A.K. Sawhney A Course in Electronic Measurements and Instrumentation Dhanpat Rai & Co. (P) Limited 2015

Reference Books:

1. R S Khandpur- Handbook of Biomedical instrumentation- McGraw Hill Education; Third edition (4 August 2014)
2. Ramakant A Gayakwad- Op – Amps and Linear Integrated Circuits Prentice Hall India Learning Private Limited 2002

Online Resources

1. www.nptel.ac.in
2. www.allaboutcircuits.com
3. www.electronicscircuits.com

For detailed syllabus of all other subjects of Electronics & Communication Engineering, 2021 revision curriculum do visit Electronics & Communication Engineering (EC) 7th Sem subject syllabuses for 2021 revision.

To see the syllabus of all other branches of diploma 2021 revision curriculum do visit SITTTR diploma all branches syllabus..

To see the results of Electronics & Communication Engineering of diploma 2021 revision curriculum do visit SITTTR diploma results..

For all Electronics & Communication Engineering academic calendars, visit Electronics & Communication Engineering all semesters academic calendar direct link.

For detailed syllabus of all the other subjects of Electronics & Communication Engineering (EC) 6th Sem, 2021 curriculum do visit Electronics & Communication Engineering 6th Sem subject syllabuses for 2021 regulation. For Electronics & Communication Engineering 6th Sem semesters scheme and subjects, refer to Electronics & Communication Engineering 6th Sem 2021 regulation scheme. The scheme details of Professional Elective-III for Electronics & Communication Engineering 6th Sem is as follows.

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

To see the syllabus of all other branches of diploma 2021 revision curriculum do visit SITTTR diploma all branches syllabus..

To see the results of Electronics & Communication Engineering of diploma 2021 revision curriculum do visit SITTTR diploma results..

For all Electronics & Communication Engineering academic calendars, visit Electronics & Communication Engineering all semesters academic calendar direct link.

Wishing you great luck ahead.

For Electronics & Communication Engineering 6th Sem scheme and its subjects, do visit Electronics & Communication Engineering (EC) 6th Sem 2021 regulation scheme. For Professional Elective-III scheme and its subjects refer to Electronics & Communication Engineering (EC) Professional Elective-III syllabus scheme. The detailed syllabus of embedded systems is as follows.

Course Objectives:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Course Outcomes:

On completion of the course, the student will be able to:

1. Explain the basics of embedded systems and its architecture
2. Make use of AVR Microcontrollers to develop embedded programs using embedded C
3. Make use of AVR microcontroller to interface with various peripheral devices.
4. Familiarize RTOS

Module 1:

Embedded Systems – Definition, difference from general purpose computers -Classification of embedded systems, Application areas, Components of embedded systemhardware, andSoftware embedded into the system Architecture of embedded system – Building blocks of an embedded system , Core of embedded system – categories, Memory -ROM and RAM, Sensors, actuators and I/O sub
systems (LED, Opto coupler, Relay, Stepper motor). On board (I2C, SPI, UART) and external communication interfaces (RS 232, USB, Bluetooth, Wifi)

Module 2:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4:

Operating system basics:- Kernel, types of operating systems- GPOS, RTOS. Real time operating systems:- Tasks, process, threads, multiprocessing and multi-tasking, task scheduling, types, threads and process scheduling, task communication, task synchronization, device drivers. List Selection criteria for RTOS. Overview of Micro C/OS-II and its services. List popular Real Time Operating Systems (any 10).

Text Books:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

1. K.V. Shibu, Introduction to Embedded Systems, 2e, McGraw Hill Education India, 2016.
2. Rajkamal, Embedded Systems Architecture, Programming and Design, TMH, 2003

Reference Books:

1. Muhammad Ali Mazidi, SarmadNaimi, &SepehrNaimi, The AVR Microcontroller and Embedded Systems Using Assembly and C, Pearson Education
2. Michael J. Pont, Embedded C, Pearson Education, Second Edition

Online Resources

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For detailed syllabus of all other subjects of Electronics & Communication Engineering, 2021 revision curriculum do visit Electronics & Communication Engineering (EC) 6th Sem subject syllabuses for 2021 revision.

To see the syllabus of all other branches of diploma 2021 revision curriculum do visit SITTTR diploma all branches syllabus..

To see the results of Electronics & Communication Engineering of diploma 2021 revision curriculum do visit SITTTR diploma results..

For all Electronics & Communication Engineering academic calendars, visit Electronics & Communication Engineering all semesters academic calendar direct link.

For Electronics & Communication Engineering 6th Sem scheme and its subjects, do visit Electronics & Communication Engineering (EC) 6th Sem 2021 regulation scheme. For Professional Elective-III scheme and its subjects refer to Electronics & Communication Engineering (EC) Professional Elective-III syllabus scheme. The detailed syllabus of antenna and wave propagation is as follows.

Course Objectives:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Course Outcomes:

On completion of the course, the student will be able to:

1. Explain different types of radio wave propagation methods
2. Illustrate sky wave propagation
3. Summarize antenna and antenna parameters
4. Outline different types of antennas

Module 1:

• Radio wave propagation: Introduction, definition, categorization and general classification, different modes of wave propagation. Ray/Mode concept.
• Ground wave propagation: introduction, plane earth reflection, space and surface waves, wave tilt, curved earth reflection, LOS distance, effective earth radius.
• Space wave propagation: Introduction, field strength of space wave with distance and height, effect of earth’s curvature, absorption, super refraction, duct propagation, scattering phenomenon, tropospheric propagation.

Module 2:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4:

• Wire antenna – Short dipole antenna, dipole antenna, loop antenna, mono pole antenna
• Aperture antenna – slot antenna, horn antenna Microstrip antenna and lens antenna
• Travelling wave antenna – long wire antenna, Yagi-Uda antenna, helical wire antenna, spiral antenna
• Antenna arrays – linear and planar antenna arrays

Text Books:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

1. John D. Krauss : Antennas for all application, Tata McGrew Hill 3/e
2. Balanis : Antenna Theory and design, Wiley Publication, 3/e
3. K. D. Prasad: Antenna and wave propagation, Satya Prakashan, New Delhi

Reference Books:

1. Collin R.E. : Antenna and Radio wave propagation, Tata McGrew Hill, 2005
2. G. S. N. Raju : Antennas and wave propagation, Pearson education, 2004

Online Resources

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For detailed syllabus of all other subjects of Electronics & Communication Engineering, 2021 revision curriculum do visit Electronics & Communication Engineering (EC) 6th Sem subject syllabuses for 2021 revision.

To see the syllabus of all other branches of diploma 2021 revision curriculum do visit SITTTR diploma all branches syllabus..

To see the results of Electronics & Communication Engineering of diploma 2021 revision curriculum do visit SITTTR diploma results..

For all Electronics & Communication Engineering academic calendars, visit Electronics & Communication Engineering all semesters academic calendar direct link.

For Electronics & Communication Engineering 6th Sem scheme and its subjects, do visit Electronics & Communication Engineering (EC) 6th Sem 2021 regulation scheme. For Professional Elective-III scheme and its subjects refer to Electronics & Communication Engineering (EC) Professional Elective-III syllabus scheme. The detailed syllabus of medical electronics is as follows.

Course Objectives:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Course Outcomes:

On completion of the course, the student will be able to:

1. Illustrate ECG, EEG, and EMG.
2. Describe blood parameter measurements and applications of LASER in medical field.
3. Summarize various Therapeutic equipments.
4. Explain various medical imaging systems and precautions while handling biomedical equipments.

Module 1:

Anatomy of human body – various physiological systems – cardio vascular system, nervous system- respiratory system- Sources of bio-electric potentials – resting and action potentials – types of electrodes used for ECG,EEG,EMG measurements- surface electrodes- needle electrodes- micro electrodes- origin and significance of ECG wave form – lead systems- Block diagram of ECG recorder. Electrical activity of brain – Block diagram of EEG machine -Block diagram of EMG recorder

Module 2:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4:

Imaging systems: Operation of X-ray machine – working principle of CT scanner, Ultrasonic imaging, Echo cardio graphy; Nuclear Magnetic Resonance imaging. Bio-telemetry: need of biotelemetry – block diagram – application of bio-telemetry system. Electrical Safety: effects of electricity on human body – macro shock and micro shock -importance of grounding. – Electrical safety measures with respect to machine, operator and patients – precautions while handling bio-medical instruments – precautions while handling x-ray machines

Text Books:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

1. Biomedical Instrumentation and Measurements – Leslie Cromwell, Fred J Weibell and Erich A Pfeiffer – PHI Learning Private Limited.
2. Handbook of Biomedical Instrumentation – R S Khandpur – Tata McGraw Hill Publishing Company Limited.

Reference Books:

1. Principles of Medical Electronics and Biomedical Instrumentation-CRaja Rao & S K Guha
2. Medical Instrumentation -John. G. Webster
3. Biomedical Instrumentation -Dr. Arumugham

Online Resources

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For detailed syllabus of all other subjects of Electronics & Communication Engineering, 2021 revision curriculum do visit Electronics & Communication Engineering (EC) 6th Sem subject syllabuses for 2021 revision.

To see the syllabus of all other branches of diploma 2021 revision curriculum do visit SITTTR diploma all branches syllabus..

To see the results of Electronics & Communication Engineering of diploma 2021 revision curriculum do visit SITTTR diploma results..

For all Electronics & Communication Engineering academic calendars, visit Electronics & Communication Engineering all semesters academic calendar direct link.

For detailed syllabus of all the other subjects of Electronics & Communication Engineering (EC) 5th Sem, 2021 curriculum do visit Electronics & Communication Engineering 5th Sem subject syllabuses for 2021 regulation. For Electronics & Communication Engineering 5th Sem semesters scheme and subjects, refer to Electronics & Communication Engineering 5th Sem 2021 regulation scheme. The scheme details of Professional Elective-II for Electronics & Communication Engineering 5th Sem is as follows.

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

To see the syllabus of all other branches of diploma 2021 revision curriculum do visit SITTTR diploma all branches syllabus..

To see the results of Electronics & Communication Engineering of diploma 2021 revision curriculum do visit SITTTR diploma results..

For all Electronics & Communication Engineering academic calendars, visit Electronics & Communication Engineering all semesters academic calendar direct link.

Wishing you great luck ahead.

For Electronics & Communication Engineering 5th Sem scheme and its subjects, do visit Electronics & Communication Engineering (EC) 5th Sem 2021 regulation scheme. For Professional Elective-II scheme and its subjects refer to Electronics & Communication Engineering (EC) Professional Elective-II syllabus scheme. The detailed syllabus of microwave engineering lab is as follows.

Course Objectives:

• To familiarize with working of microwave devices
• To study the working of microwave generators and antennas
• To give an outline on antenna designing software

Course Outcomes:

On completion of the course, the student will be able to:

1. Apply the concepts of the wave guide parameters
2. Experiment with microwave coupling devices
3. Demonstrate the operation of Microwave generators and radiators
4. Design antenna with high frequency simulation software

Module 1:

1. Familiarize microwave components and instruments.
2. Measure the frequency and wave length of a microwave signal.
3. Determination of VSWR of a given load.

Module 2:

1. To measure the isolation between E and H arms of magic tee and demonstrate power division in magic tee.
2. To demonstrate the isolation of E and H plane tee and its power division.
3. To measure the coupling factor, insertion loss and directivity of directional coupler
4. To measure VSWR, insertion loss and isolation of a circulator.

Module 3:

1. Plot the V-I characteristics of Gunn diode.
2. Plot the characteristics of reflex klystron tube.
3. Measure the gain of Horn antenna.

Module 4:

1. Familiarize high Frequency Simulation Software(FSS)
2. Using FSS design a monopole antenna
3. Using FSS design a dipole antenna
4. Open Ended experiments**

Suggested Open Ended Projects

(Not for End Semester Examination but compulsory to be included in Continuous Internal Evaluation. Students can do open ended experiments as a group of 4-5. There is no duplication in experiments between groups. Open ended experiments should include the concepts of circuit design and application)

1. Application of high frequency simulation software
   • Radiation pattern of microstrip antenna
   • VSWR measurements
   • Gain and Directivity measurements
   • Polarization plots

Text Books:

1. Balanis_Advanced Engineering Electromagnetics, John Wiley & Sons, 2012
2. Samuel Y.Liao “Microwave Devices and circuits” – Pearson
3. G.S.N.Raju “Microwave Engineering” -I K International

Online Resources

1. https://www.ansys.com/en-in/academic/students/ansys-electronics-desktop-student
2. https://vlab.amrita.edu/?sub=3&brch=179&sim=400&cnt=407
3. http://eem-iitd.vlabs.ac.in/exp7.html

For detailed syllabus of all other subjects of Electronics & Communication Engineering, 2021 revision curriculum do visit Electronics & Communication Engineering (EC) 5th Sem subject syllabuses for 2021 revision.

To see the syllabus of all other branches of diploma 2021 revision curriculum do visit SITTTR diploma all branches syllabus..

To see the results of Electronics & Communication Engineering of diploma 2021 revision curriculum do visit SITTTR diploma results..

For all Electronics & Communication Engineering academic calendars, visit Electronics & Communication Engineering all semesters academic calendar direct link.

For Electronics & Communication Engineering 5th Sem scheme and its subjects, do visit Electronics & Communication Engineering (EC) 5th Sem 2021 regulation scheme. For Professional Elective-II scheme and its subjects refer to Electronics & Communication Engineering (EC) Professional Elective-II syllabus scheme. The detailed syllabus of industrial automation lab is as follows.

Course Objectives:

• To provide hands-on training to construct electric power converters and controllers using power semiconductor switching devices.
• To develop PLC ladder programs to realize real time applications.

Course Outcomes:

On completion of the course, the students will be able to:

1. Design various gate triggering methods for SCR
2. Construct controlled rectifiers and power controlling circuits using power semiconductor switching devices
3. Implement power converter circuits using Power Semiconductor Switching Devices
4. Develop PLC ladder program for an application

Module 1:

1. Plot V-I characteristics of SCR
2. Design single phase control using resistance triggering circuit and 1) plot the waveform across the load and SCR 2) find the maximum firing angle
3. Design single phase control using RC triggering circuit and 1) plot the waveform across the load and SCR 2) find the maximum firing angle
4. Design single phase control using UJT triggering circuit and 1) plot the waveform across the load and SCR 2) find the maximum firing angle

Module 2:

1. Construct a single-phase control rectifier using SCR with resistive load and 1) find minimum firing angle 2) find maximum firing angle
2. Construct an illumination control circuit using DIAC and TRIAC.
3. Construct an SCR-based DC motor speed control circuit.
4. Design a time delay relay circuit using UJT and SCR.

Module 3:

1. Construct an oscillator circuit using DIAC and plot the waveform.
2. Implement an emergency lamp and a battery charger circuit using SCR
3. Implement an inverter circuit using BJT and plot the waveform.

Module 4:

1. Write simple programs using PLC ladder diagram instruction sets
2. Implement application circuits using PLC

Suggested Open Ended Projects

(Not for End Semester Examination but compulsory to be included in Continuous Internal Evaluation. Students can do open ended experiments as a group of 3-5. There should be no duplication in experiments between groups. This is mainly for the purpose of continuous internal evaluation. Students should prepare a separate report on open ended experiment of their choice.)

• Home Security System – Burglar’s Alarm
• Automatic Door
• Automatic Vehicle Collision Prevention System
• Chopper circuit using SCR

Text Books:

1. Industrial Electronics and Control – S K Bhattacharya, S Chatterjee.
2. Programmable logic controllers – Frank D Petruzella

Reference Books:

1. Introduction to Programmable Logic Controllers – Gary Dunning – 3rd Edition -Delmar
2. http://www.nptel.ac.in/courses/108105066/PDF/L- 1(SSG)(PE)%20((EE)NPTEL).pdf
3. Power Electronics – P S Bimbhra

Online Resources

1. http://fac.ksu.edu.sa/sites/default/files/lab-manual_v3.pdf
2. http://www.eee.griet.ac.in/wp-content/uploads/2014/12/PLC-Lab-Manual.pdf
3. http://onlinemas.weebly.com/uploads/6/3/9/4/6394050/lab_manual_shafeeq.pdf
4. http://gnindia.dronacharya.info/EEE/Downloads/Labmanuals/Power-Electronics-Lab-Manual.pdf
5. https://www.watelectronics.com/how-to-program-the-programmable-logic-controllers/

For detailed syllabus of all other subjects of Electronics & Communication Engineering, 2021 revision curriculum do visit Electronics & Communication Engineering (EC) 5th Sem subject syllabuses for 2021 revision.

To see the syllabus of all other branches of diploma 2021 revision curriculum do visit SITTTR diploma all branches syllabus..

To see the results of Electronics & Communication Engineering of diploma 2021 revision curriculum do visit SITTTR diploma results..

For all Electronics & Communication Engineering academic calendars, visit Electronics & Communication Engineering all semesters academic calendar direct link.