6117: Computer Aided Press Tool Drawing Lab KL Diploma Syllabus for Tool & Die 6th Sem 2015 Revision SITTTR

Computer Aided Press Tool Drawing Lab detailed syllabus for Tool & Die Engineering (Tool & Die) for 2015 revision curriculum has been taken from the SITTTRs official website and presented for the Tool & Die students. For course code, course name, number of credits for a course and other scheme related information, do visit full semester subjects post given below.

For Tool & Die Engineering 6th Sem scheme and its subjects, do visit Tool & Die 6th Sem 2015 revision scheme. The detailed syllabus of computer aided press tool drawing lab is as follows.

Course Outcomes:

On completion of the course, Student should be able to:

1. Understand computer aided press tool drawing by Solid works, Pro-E Software’s
2. Understand assembling the components.
3. Appreciate the mould design and drawing.
4. Understand to draw compound tools by solid works.

SPECIFIC OUTCOMES

1. Understand computer aided press tool drawing by Solid works, Pro-E Software’s
   1. Draw a sketch using tool bars-dimensioning-2D drawings
   2. Identify Basic modeling-protrusion-Extrude
   3. Create advanced modeling
2. Understand assembling the components
   1. Draw -projection view–Detailed view-Dimensioning
   2. Describe introduction to surface modeling-conversion of surface to solids
3. Analyze mould design and drawing
   1. Study introduction to mould design
   2. Draw compound tool-Bending tool-Forming tool-Drawing tool
4. Understand to draw compound tools by solid works.
   1. Understand to draw a bending tool.
   2. Understand to draw a forming tool.
   3. Understand to draw a drawing tool.

MODULE-I

Introduction to Pro-E-Familiarization of interface/Windows. Sketching- Drawing a sketch using sketcher tool bars – dimensioning – constrains – importing 2D drawings. Basic modeling-Protrusion-Extrude-Single & double sided, Mirror. Rib-Chamfer, Fillet& Shell. Holes – Standard & cut – Revolve. Creating datum planes, axes, curves , points, co – ordinate systems. Sweep – Blend – Patterns – straight, rotational & general. Advanced modeling – Variable section sweep, swept blend, helical sweep etc. Assembling – Assembling the components – exploded state. Drawing by auto cad- General view – projection view – detailed view – auxiliary view – Revolved section view – dimensioning with geometric tolerances. Introduction with to surface modeling – Creating surfaces – open and close ends – merge tools -trim – intersection – convertion of surface to solids. Introduction to mould design – creating components – add shrinkage – parting line – split core and cavity lay out for multy impression cooling – runners – gates – water line – Add ejector pins -BOM. Compound tool – Direct and indirect knockout on compound tool – Bending tool – V bending tool, U bending tool , L bending tool , multiple angle bending tool. Forming tool- Solid type and pressure pad type. Drawing tool – shallow and deep drawing tool.

Note: First three modules should be completed using Auto cad & Pro-E.

Design and Assembly drawings of press tools module – 4by using Solid works.

For detailed syllabus of all other subjects of Tool & Die Engineering, 2015 revision curriculum do visit Tool & Die 6th Sem subject syllabuses for 2015 revision.

To see the syllabus of all other branches of diploma 2015 revision curriculum do visit all branches of SITTTR diploma 2015 revision.